Verification of stress transfer mechanism in fatigue crack growth under overload

被引：5
|
作者：
Wang, Chen [1 ]
Chen, Rong [1 ]
Guo, Su-Juan [1 ]
Zhu, Ming-Liang [1 ]
Xuan, Fu-Zhen [1 ]
机构：
[1] East China Univ Sci & Technol, Sch Mech & Power Engn, Key Lab Pressure Syst & Safety, Minist Educ, Shanghai 200237, Peoples R China
来源：
THEORETICAL AND APPLIED FRACTURE MECHANICS | 2023年 / 128卷
基金：
中国国家自然科学基金;
关键词：
Fatigue crack growth; Overload effect; Stress transfer; Crack tip blunting; Crack closure; MESH REFINEMENT; CLOSURE; PROPAGATION;
D O I：
10.1016/j.tafmec.2023.104104
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Cyclic plastic finite element modeling was carried out to investigate effect of overload on fatigue crack growth under blunting and no-blunting mechanisms at different overload ratios. The stress transfer mechanism was verified and was found more obvious in the case of crack blunting though its effect was time-limited. The level of crack closure varied periodically due to gradual relaxation of compressive residual stress during crack propagation. Both the overload plastic zone and the overload affected zone were linearly correlated with overload ratio, and an overload ratio value of 1.1 was the best choice for studying overload effect.
引用
收藏
页数：9
相关论文
共 50 条
  • [1] Fatigue crack growth with overload under spectrum loading
    Huang, XP
    Zhang, JB
    Cui, WC
    Leng, JX
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2005, 44 (02) : 105 - 115
  • [2] Experimental Verification and Estimation of Fatigue Crack Growth Delay due to Single Overload
    Wu, Hao
    Zhu, Jun
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2022, 2022
  • [3] In-situ SEM and optical microscopy testing for investigation of fatigue crack growth mechanism under overload
    Zhang, Wei
    Cai, Liang
    12TH INTERNATIONAL FATIGUE CONGRESS (FATIGUE 2018), 2018, 165
  • [4] Fatigue crack closure and crack growth following an overload
    Vermal, BB
    Pandey, RK
    JOURNAL OF TESTING AND EVALUATION, 2004, 32 (06) : 462 - 468
  • [5] Mechanism of the two stage plastic deformation following an overload in fatigue crack growth
    Shimojo, M
    Chujo, M
    Higo, Y
    Nunomura, S
    INTERNATIONAL JOURNAL OF FATIGUE, 1998, 20 (05) : 365 - 371
  • [6] Effect of an overload on the rate of fatigue crack propagation under plane stress conditions
    Bao, H.
    McEvily, A.J.
    Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 1995, 26 A (07): : 1725 - 1733
  • [7] In situ synchrotron stress mappings to characterize overload effects in fatigue crack growth
    Thielen, M.
    Schaefer, F.
    Gruenewald, P.
    Laub, M.
    Marx, M.
    Meixner, M.
    Klaus, M.
    Motz, C.
    INTERNATIONAL JOURNAL OF FATIGUE, 2019, 121 : 155 - 162
  • [8] A study on fatigue crack growth behavior subjected to a single tensile overload: Part II. Transfer of stress concentration and its role in overload-induced transient crack growth
    Lee, S. Y.
    Choo, H.
    Liaw, P. K.
    An, K.
    Hubbard, C. R.
    ACTA MATERIALIA, 2011, 59 (02) : 495 - 502
  • [9] Fatigue crack growth delay following overload
    Verma, BB
    Kumar, A
    Ray, PK
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2000, 53 (06): : 591 - 595
  • [10] Fatigue crack growth under overload/underload in different strength structural steels
    Liang, Hang
    Zhan, Rui
    Wang, Dongpo
    Deng, Caiyan
    Guo, Baichen
    Xu, Xiaohan
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2022, 192
12345