Vulnerability to Parameter Spread in Josephson Traveling-Wave Parametric Amplifiers

analyze the effect of circuit parameter variation on the performance of Josephson traveling-wave parametric amplifiers (JTWPAs). Specifically, the JTWPA concept we investigate is using flux-biased nonhysteretic rf-SQUIDs in a transmission line configuration, which harnesses the three-wave mixing (3WM) regime. Dispersion engineering enables phase-matching to achieve power gain of similar to 20 dB, while suppressing the generation of unwanted mixing processes. Two dispersion engineering concepts using a 3WM-JTWPA circuit model, i.e., resonant phase-matching (RPM) and periodic capacitance modulation (PCM), are discussed, with results potentially also applicable to four-wave-mixing (4WM) JTWPAs. We propose suitable circuit parameter sets and evaluate amplifier performance with and without circuit parameter variance using transient circuit simulations. This approach inherently takes into account microwave reflections, unwanted mixing products, imperfect phase-matching, pump depletion, etc. In the case of RPM the resonance frequency spread is critical, while PCM is much less sensitive to parameter spread. We discuss degrees of freedom to make the JTWPA circuits more tolerant to parameter spread. Finally, our analysis shows that the flux-bias point where rf-SQUIDs exhibit Kerr-free nonlinearity is close to the sweet spot regarding critical current spread.