A generous review of fly ash engineering characteristics on concrete in trait of compressive strength

被引:1
|
作者
Shaw, Sayan Kumar [1 ]
Sil, Arjun [1 ]
机构
[1] NIT Silchar, Dept Civil Engn, Silchar 788010, Assam, India
关键词
fly ash; compressive strength; w; b ratio; FA; ages; composition; statistical distribution; SELF-CONSOLIDATING CONCRETE; INCORPORATING HIGH VOLUMES; MECHANICAL-PROPERTIES; STRUCTURAL CONCRETE; GEOPOLYMER CONCRETE; PARTIAL REPLACEMENT; CEMENT HYDRATION; AGGREGATE; METAKAOLIN; FINENESS;
D O I
10.1504/IJSTRUCTE.2023.126800
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
Fly ash is a fine grey powder consisting mostly of spherical, glassy particles produced as a by-product in coal-fired power stations having pozzolanic properties that exhibits supplementary cementitious material. This paper essentially investigated about the effects of fly ash on concrete 'with and without admixture, and as well as mixed form' in aspect of water-binder ratio, fly ash replacement percentages and curing ages (days). For modelling and analysis of these properties statistical best fit functions were used. This comprehensive study shows that in all types of concrete, compressive strength decreasing with increasing water-binder ratio. However, in maximum cases, highest compressive strength observed in case of 'with admixture fly ash concrete' is at 20% fly ash (FA) replacement level and shows maximum strength gaining initiates between 7-90 days in case of 'with admixture FA concrete' whereas significant strength gaining observed after 90 days onwards and ultimate strength gaining at 365 days.
引用
收藏
页码:109 / 149
页数:42
相关论文
共 50 条
  • [41] Compressive strength prediction of fly ash concrete by using machine learning techniques
    Khursheed, Suhaila
    Jagan, J.
    Samui, Pijush
    Kumar, Sanjay
    INNOVATIVE INFRASTRUCTURE SOLUTIONS, 2021, 6 (03)
  • [42] Compressive Strength and Microstructural Properties of Fly Ash-Based Geopolymer Concrete
    Nagalia, Gaurav
    Park, Yeonho
    Abolmaali, Ali
    Aswath, Pranesh
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2016, 28 (12)
  • [43] The Effect of Fly Ash and Red Mud Content on the Compressive Strength of Foam Concrete
    Wang, Fan
    Zhang, Yihe
    Zhao, Tong
    Zhang, Anzhen
    SUSTAINABLE DEVELOPMENT OF URBAN ENVIRONMENT AND BUILDING MATERIAL, PTS 1-4, 2012, 374-377 : 1523 - 1526
  • [44] Residual compressive strength of high volume fly ash concrete at elevated temparature
    Sravana, P.
    Rao, P. Srinivasa
    Rao, M. V. Seshagiri
    PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN CONCRETE TECHNOLOGY, 2007, : 747 - 754
  • [45] Compressive strength of pervious concrete paving blocks for pavement with the addition of fly ash
    Septiandini, E.
    Widiasanti, I
    Pamungkas, C. A.
    Putri, A. S. S.
    Mulyono, T.
    Abdul, N. Z. P.
    5TH ANNUAL APPLIED SCIENCE AND ENGINEERING CONFERENCE (AASEC 2020), 2021, 1098
  • [46] Compressive strength prediction of fly ash concrete by using machine learning techniques
    Suhaila Khursheed
    J. Jagan
    Pijush Samui
    Sanjay Kumar
    Innovative Infrastructure Solutions, 2021, 6
  • [47] Effect of addition of NaOH on compressive strength of high volume fly ash concrete
    Bhuvaneswari, D.
    Revathi, V.
    Thiyagu, K.
    International Journal of Earth Sciences and Engineering, 2014, 7 (06): : 2614 - 2619
  • [48] Effect of Fly Ash on Compressive Strength of Concrete Containing Recycled Coarse Aggregate
    Rohman, Rosyid Kholilur
    Aji, Seno
    INTERNATIONAL CONFERENCE ON SCIENCE AND APPLIED SCIENCE (ICSAS) 2018, 2018, 2014
  • [49] Compressive strength and microstructural characteristics of class C fly ash geopolymer
    Guo, Xiaolu
    Shi, Huisheng
    Dick, Warren A.
    CEMENT & CONCRETE COMPOSITES, 2010, 32 (02): : 142 - 147
  • [50] Effect Of Crumb Rubber On Compressive Strength Of Fly Ash Based Geopolymer Concrete
    Azmi, Ahmad Azrem
    Abdullah, Mohd Mustafa Al Bakri
    Ghazali, Che Mohd Ruzaidi
    Sandu, Andrei Victor
    Hussin, Kamarudin
    2ND INTERNATIONAL CONFERENCE ON GREEN DESIGN AND MANUFACTURE 2016 (ICONGDM 2016), 2016, 78