Analytical and experimental investigation on stability of rotor system with spline coupling considering torque, friction coefficient and external damping

被引:12
|
作者
Dai, Zezeng [1 ]
Jing, Jianping [1 ,2 ,3 ]
Chen, Changmin [1 ]
Cong, Jiqing [1 ]
Quan, Yong [4 ]
机构
[1] Shanghai Jiao Tong Univ, State Key Lab Mech Syst & Vibrat, Shanghai 200240, Peoples R China
[2] Shanghai Jiao Tong Univ, Gas Turbine Res Inst, Shanghai 200240, Peoples R China
[3] Fundamental Sci Vibrat Shock & Noise Lab, Shanghai 200240, Peoples R China
[4] China Aviat Powerplant Res Inst, Zhuzhou 412002, Hunan, Peoples R China
基金
美国国家科学基金会;
关键词
Spline coupling; Stability; Numerical model; Friction coefficient; Torque; External damping; CONTACT; MODEL;
D O I
10.1016/j.mechmachtheory.2022.105200
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The spline coupling is widely used in high-speed rotor systems. As the lack of good understanding of the instability and influence behaviors, the spline induced instability is still not well controlled. From the view of dynamics, torque, friction coefficient and external damping are key factors that influence the stability directly. In this paper, the mechanism and influence law of spline induced instability are investigated. A new model to predict the threshold speed of instability of spline coupled rotor accurately is proposed. A criterion to determine the stability of rotor through judging the relative displacement between splines is derived. Then the effects of torque, friction coefficient and external damping on stability are investigated. Corresponding experiments are carried out to validate the model. The characteristics of instability caused by spline are observed successfully through repeated experiments. Results demonstrate that the mechanism of instability caused by spline is the relative effect of the internal damping from spline coupling and the external damping. This investigation can help with the prediction of instability caused by the spline and the regulation of rotor stability.
引用
收藏
页数:29
相关论文
共 41 条
  • [31] Simulations and Experimental Investigation on Motion Stability of a Flexible Rotor-bearing System with a Transverse Crack
    Li Chaofeng
    Yu Hexing
    Zhou Shihua
    Wen Bangchun
    CHINESE JOURNAL OF MECHANICAL ENGINEERING, 2013, 26 (06) : 1194 - 1203
  • [32] Investigation of analytical solution of super harmonic resonance of rotor system in permanent magnet synchronous motors considering mixed eccentricity
    Liu, Feng
    Liu, Hui
    Chen, Xing
    COMMUNICATIONS IN NONLINEAR SCIENCE AND NUMERICAL SIMULATION, 2023, 119
  • [33] The effects of dimensional manufacturing tolerances on stability of a symmetric hydrodynamic journal bearing rotor system - An experimental investigation
    Ogrodnik, P.J.
    Xu, W.
    Goodwin, M.J.
    Bancroft, G.A.
    Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2011, 225 (12): : 1152 - 1158
  • [34] The effects of dimensional manufacturing tolerances on stability of a symmetric hydrodynamic journal bearing rotor system - an experimental investigation
    Ogrodnik, P. J.
    Xu, W.
    Goodwin, M. J.
    Bancroft, G. A.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2011, 225 (J12) : 1152 - 1158
  • [35] Analytical, numerical, and experimental methods to study thermo-elastic coupling inherent and vibration characteristics of a flexible rotor system
    Chiu, Yi-Jui
    Zhao, Ya-Zheng
    Chen, Ding
    Yang, Chia-Hao
    JOURNAL OF VIBRATION AND CONTROL, 2024, 30 (13-14) : 2919 - 2938
  • [36] IDENTIFICATION OF MULTIPLE FAULT PARAMETERS IN A RIGID-ROTOR AND FLEXIBLE-BEARING-COUPLING SYSTEM - AN EXPERIMENTAL INVESTIGATION
    Lal, Mohit
    Tiwari, Rajiv
    PROCEEDINGS OF THE ASME GAS TURBINE INDIA CONFERENCE, 2013, 2014,
  • [37] An analytical and experimental investigation considering the effect of material flow velocity on tensile strength of a steel alloy joint produced by friction stir welding process
    Hadi, Behzad
    Aalami-Aleagha, M. E.
    Feli, Saeed
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2021, 235 (04) : 713 - 722
  • [38] The effect of the blank holding force on formability in hot deep drawing of boron steel considering heat transfer phenomena and friction coefficient by simulation and experimental investigation
    Ouyang, Yuqin
    Lee, Min-Sik
    Moon, J. H.
    Kang, Chung-Gil
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2012, 226 (B9) : 1506 - 1518
  • [39] Experimental Investigation into the Friction Coefficient of Ball-on-Disc in Dry Sliding Contact Considering the Effects of Surface Roughness, Low Rotation Speed, and Light Normal Load
    Wen, Qi
    Liu, Mingming
    Zhang, Zenglei
    Sun, Yunyun
    LUBRICANTS, 2022, 10 (10)
  • [40] Numerical simulation and experimental investigation on the thermal-fluid-solid multi-physical field coupling characteristics of wet friction pairs considering cavitation effect
    Wang, Qiliang
    Zhang, Xingbo
    Wang, Dagang
    Cui, Hongwei
    Zhang, Shuai
    Wang, Jianmei
    APPLIED THERMAL ENGINEERING, 2025, 260