Influence of Varying the Spraying Distance on the Structural-Phase State and Mechanotribological Properties of 86WC-10Co-4Cr-Based Coatings Obtained by the HVOF Method

被引：6
|
作者：
Rakhadilov, Bauyrzhan [1 ]
Muktanova, Nazerke [2 ,3 ]
Kakimzhanov, Dauir [2 ,3 ]
Adilkanova, Meruert [2 ]
Kurbanbekov, Sherzod [4 ]
Abdulina, Saule [2 ]
机构：
[1] Sarsen Amanzholov East Kazakhstan Univ, Res Ctr Surface Engn & Tribol, Ust Kamenogorsk 070000, Kazakhstan
[2] Daulet Serikbaev East Kazakhstan Tech Univ, Int Sch Engn, Ust Kamenogorsk 070002, Kazakhstan
[3] PlasmaSci LLP, Ust Kamenogorsk 070010, Kazakhstan
[4] Khoja Akhmet Yassawi Int Kazakh Turkish Univ, Dept Phys, Turkestan 161200, Kazakhstan
来源：
COATINGS | 2024年 / 14卷 / 03期
关键词：
wear resistance; metalloceramic coating; microstructure; phase composition; ABRASIVE WEAR BEHAVIOR; WC-CO; TRIBOLOGICAL BEHAVIOR; TUNGSTEN CARBIDE; EROSION BEHAVIOR; WC-12CO COATINGS; MICROSTRUCTURE; PERFORMANCE; CAVITATION; IMPROVEMENT;
D O I：
10.3390/coatings14030264
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents the results of a metallographic and tribological study of 86WC-10Co-4Cr coatings obtained by the HVOF method on the Termika-3 unit at varying spraying distances. The influence of spraying distance on the coating microstructure, phase composition, as well as mechanical and tribological properties, was studied. According to the results of the study, it was found that the optimum spraying distance for 86WC-10Co-4Cr coatings with improved wear resistance and hardness characteristics and low porosity is 300 mm.
引用
收藏
页数：17
相关论文
共 43 条
  • [21] Structural-Phase State and Properties of Cr-Al-Si-N Coatings Obtained by Vacuum Arc Plasma Deposition
    V. I. Kolesnikov
    O. V. Kudryakov
    V. N. Varavka
    A. V. Sidashov
    I. V. Kolesnikov
    D. S. Manturov
    A. I. Voropaev
    Physical Mesomechanics, 2023, 26 : 126 - 136
  • [22] Structural-Phase State and Properties of Cr-Al-Si-N Coatings Obtained by Vacuum Arc Plasma Deposition
    Kolesnikov, V. I.
    Kudryakov, O. V.
    Varavka, V. N.
    Sidashov, A. V.
    Kolesnikov, I. V.
    Manturov, D. S.
    Voropaev, A. I.
    PHYSICAL MESOMECHANICS, 2023, 26 (02) : 126 - 136
  • [23] Influence of the corrosion of saturated saltwater drilling fluid on the tribological behavior of HVOF WC-10Co4Cr coatings
    Cui, Xiao-yu
    Wang, Cheng-biao
    Kang, Jia-jie
    Yue, Wen
    Fu, Zhi-qiang
    Zhu, Li-na
    ENGINEERING FAILURE ANALYSIS, 2017, 71 : 195 - 203
  • [24] Influence of Fine Powder Feedstock (−10 + 2 μm) on the HVOF Spraying Characteristics, Coating Morphology, and Properties of WC-CoCr 86-10-4
    W. Tillmann
    J. Nebel
    W. Piotrowski
    Journal of Thermal Spray Technology, 2013, 22 : 242 - 249
  • [25] Influence of Fine Powder Feedstock (-10+2 μm) on the HVOF Spraying Characteristics, Coating Morphology, and Properties of WC-CoCr 86-10-4
    Tillmann, W.
    Nebel, J.
    Piotrowski, W.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2013, 22 (2-3) : 242 - 249
  • [26] Effect of Sintering Temperature on the Properties of Rapid Agglomerate Sintered WC-10Co-4Cr Powders and Its HVOF Coatings
    Zhou W.
    Fan K.
    Huang C.
    Liu Z.
    Wan W.
    Gong T.
    Cailiao Daobao/Materials Reports, 2022, 36 (06):
  • [27] Microstructure and sliding wear properties of WC-10Co-4Cr coatings on the inner surface of TC4 slender tube by HVOF
    Zhao, Liangyu
    Zhang, Ziqian
    Wang, Bing
    Xu, Shilin
    Si, Chaorun
    MATERIALS LETTERS, 2022, 328
  • [28] Corrosion and wear of coatings fabricated by HVOF-spraying of nanostructured and conventional WC-10Co-4Cr powders on Al7075-T6
    Lekatou, A. G.
    Sioulas, D.
    Grimanelis, D.
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2023, 112
  • [29] Effect of Spray Particle Velocity on Cavitation Erosion Resistance Characteristics of HVOF and HVAF Processed 86WC-10Co4Cr Hydro Turbine Coatings
    Kumar, R. K.
    Kamaraj, M.
    Seetharamu, S.
    Pramod, T.
    Sampathkumaran, P.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2016, 25 (06) : 1217 - 1230
  • [30] Effect of Spray Particle Velocity on Cavitation Erosion Resistance Characteristics of HVOF and HVAF Processed 86WC-10Co4Cr Hydro Turbine Coatings
    R. K. Kumar
    M. Kamaraj
    S. Seetharamu
    T. Pramod
    P. Sampathkumaran
    Journal of Thermal Spray Technology, 2016, 25 : 1217 - 1230
12345