Evolving a Novel Blade Shape of a Savonius Wind Rotor Using an Optimization Technique Coupled With Numerical Simulations and Wind Tunnel Tests

The global adoption of Savonius wind rotors as an eco-friendly means of small-scale power production is on the rise. However, their suboptimal performance remains a significant challenge due to the generation of higher unproductive torque. This paper aims to address this issue by obtaining an optimal blade profile considering the power coefficient (C-P) as an output function using optimization techniques. The objective function includes the overlap ratio, intermediate points on the curve, inlet velocity, and tip speed ratio (TSR) as the optimization geometric parameters. To achieve this, the simplex search method and the non-dominated sorting genetic algorithm II are opted to develop the blade profile. The blade profile is developed using a natural cubic spline curve with fixed end points and variable intermediate points along with other parameters. The computational analysis is done using ansys fluent software with shear stress transport k-omega turbulence model. The solver setup employs the finite volume method to simulate the transient 2D flow around the blade profile. A direct comparison is made between the optimized blade profile and the conventional semicircular one over a range of TSRs. The results clearly indicate the superior performance of the former, exhibiting a higher C-Pmax by 23% compared to the conventional one at TSR = 0.8. Finally, experiments have been conducted in a wind tunnel to find the practical feasibility of the optimized blade profile generated through the simplex search method.