Scanning inductive pulse phase thermography with changing scanning speed for non-destructive testing

被引:5
|
作者
Tuschl, C. [1 ]
Oswald-Tranta, B. [1 ,3 ]
Agathocleous, T. [1 ]
Eck, S. [2 ]
机构
[1] Univ Leoben, Chair Automat, Leoben, Austria
[2] Mat Ctr Leoben Forsch GmbH, Leoben, Austria
[3] Univ Leoben, Chair Automat, Peter Tunnerstr 27, A-8700 Leoben, Austria
关键词
Inductive thermography; image registration; scanning; defect detection; rolling contact fatigue;
D O I
10.1080/17686733.2023.2170159
中图分类号
TH7 [仪器、仪表];
学科分类号
0804 ; 080401 ; 081102 ;
摘要
This work aims at non-destructive detection of surface and subsurface defects in metallic specimens (e.g. railway track components) via pulsed inductive thermography in a moving setup. A new approach for scanning with changing speed has been developed to enable manual scanning of components in track. A steel specimen is heated with an inductor, and the surface temperature, including its variation over time, is recorded with an infrared camera. The infrared sequence is evaluated by Fourier transform to phase image, in order to increase the image quality. The proposed method uses a referencing object with AprilTags visible in each frame, allowing an adjustment by image registration. Changes in velocity during the scanning process are possible, as demonstrated by a manually performed scan of the specimen and the corresponding evaluation. Results obtained with different infrared cameras and scanning speeds were condensed into an estimation of the maximum scanning speed for a given camera specification.
引用
收藏
页码:156 / 171
页数:16
相关论文
共 50 条
  • [41] Effect of Scanning Acceleration on the Leakage Signal in Magnetic Flux Leakage Type of Non-destructive Testing
    Zhang, Lintao
    Cameron, Ian M.
    Ledger, Paul D.
    Belblidia, Fawzi
    Pearson, Neil R.
    Charlton, Peter
    Sienz, Johann
    JOURNAL OF NONDESTRUCTIVE EVALUATION, 2023, 42 (01)
  • [42] Effect of Scanning Acceleration on the Leakage Signal in Magnetic Flux Leakage Type of Non-destructive Testing
    Lintao Zhang
    Ian M. Cameron
    Paul D. Ledger
    Fawzi Belblidia
    Neil R. Pearson
    Peter Charlton
    Johann Sienz
    Journal of Nondestructive Evaluation, 2023, 42
  • [43] Bridge Non-Destructive Measurements Using a Laser Scanning during Acceptance Testing: Case Study
    Tysiac, Pawel
    Miskiewicz, Mikolaj
    Bruski, Dawid
    MATERIALS, 2022, 15 (23)
  • [44] Non-destructive Testing of Forged Metallic Materials by Active Infrared Thermography
    Maillard, S.
    Cadith, J.
    Bouteille, P.
    Legros, G.
    Bodnar, J. L.
    Detalle, V.
    INTERNATIONAL JOURNAL OF THERMOPHYSICS, 2012, 33 (10-11) : 1982 - 1988
  • [45] Ultrasound Sweep Thermography (UST) as a new method of non-destructive testing
    Spiessberger, C.
    Gleiter, A.
    Busse, G.
    EMERGING TECHNOLOGIES IN NON-DESTRUCTIVE TESTING, 2008, : 199 - 203
  • [46] QUANTOM - Non-destructive scanning of waste packages for material characterization
    Havenith, Andreas
    Kettler, John
    Krycki, Kai
    Wangnick, Martina
    Fu, Bo
    Duerr, Martin
    Coquard, Laurent
    Nordhardt, Guenter
    Hummel, Julian
    Veltkamp, Thomas
    Wegener, Sven
    Koeble, Theo
    Schumann, Olaf
    ADVANCEMENTS IN NUCLEAR INSTRUMENTATION MEASUREMENT METHODS AND THEIR APPLICATIONS (ANIMMA 2019), 2020, 225
  • [47] Scanning Microwave Microscopy for Non-Destructive Characterization of SOI Wafers
    Michalas, L.
    Ionica, I.
    Brinciotti, E.
    Pirro, L.
    Kienberger, F.
    Cristoloveanu, S.
    Marcelli, R.
    2016 JOINT INTERNATIONAL EUROSOI WORKSHOP AND INTERNATIONAL CONFERENCE ON ULTIMATE INTEGRATION ON SILICON (EUROSOI-ULIS 2016), 2016, : 238 - 241
  • [48] Non-destructive Testing of Forged Metallic Materials by Active Infrared Thermography
    S. Maillard
    J. Cadith
    P. Bouteille
    G. Legros
    J. L. Bodnar
    V. Detalle
    International Journal of Thermophysics, 2012, 33 : 1982 - 1988
  • [49] Non-Destructive Testing for Defects in Electronic Package Based on Infrared Thermography
    Liu Chengyan
    Qin Fei
    Ban Zhaowei
    2013 14TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2013, : 865 - 869
  • [50] Comparison of inductive shearography and thermography as non-destructive testing methods for the detection of relevant flaws in structural and elastic adhesive bonds
    Kryukov, Igor
    Kahlmeyer, Martin
    Boehm, Stefan
    MATERIALS TESTING, 2018, 60 (05) : 526 - 532