Effect of thermal and hydrothermal aging on the crashworthiness of carbon fiber reinforced plastic composite tubes

被引:36
|
作者
Zuo, Wen [1 ]
Luo, Quantian [1 ]
Li, Qing [2 ]
Sun, Guangyong [1 ]
机构
[1] Hunan Univ, State Key Lab Adv Design & Manufacture Vehicle Bo, Changsha 410082, Peoples R China
[2] Univ Sydney, Sch Aerosp Mech & Mechatron Engn, Sydney, NSW 2006, Australia
基金
中国国家自然科学基金;
关键词
High temperatures; Hydrothermal aging; Harsh service condition; Crashworthiness; Durability; Failure modes; Carbon fibers tube; ENERGY-ABSORPTION CAPABILITY; VELOCITY IMPACT BEHAVIOR; MECHANICAL-PROPERTIES; COMPRESSIVE BEHAVIOR; FRP COMPOSITES; GLASS; TEMPERATURE; MOISTURE; EPOXY; CFRP;
D O I
10.1016/j.compstruct.2022.116136
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Thin-walled structures constructed of fiber reinforced composites are increasingly being employed in engineering practice. However, there is limited investigation into their residual properties after high temperature and hygrothermal aging. The aim of this experimental investigation is to study how moisture absorption and high temperatures affect the mechanical characteristics of fiber reinforced plastic (FRP) composite tubes. A set of accelerated thermal and hygrothermal aging experiments are designed to imitate the service conditions of carbon fiber reinforced plastic (CFRP) structure in harsh environment. Based on the glass transition temperature ob-tained by dynamic mechanical analysis (DMA), the specimens are divided into two groups for various temper-atures (25 degrees C, 70 degrees C, 100 degrees C, 160 degrees C) and hydrothermal aging (25 degrees C, 70 degrees C). The specimens of hydrothermal aging group are immersed for about 700 h to monitor the water absorption of the specimens in hygrothermal envi-ronments with different aging time. Aged composite tubes subjected to quasi-static axial compression are tested to identify compressive strength, failure modes and structural degradation process. The scanning electron mi-croscope (SEM) is used to explore the microscopic failure mechanism of CFRP tubes. As temperature and moisture absorption rate increase, the crashworthiness characteristics decrease drastically; and the failure modes differ substantially with three different failure types identified. The crashworthiness of CFRP has a nonlinear relationship with temperature, but it is related to the glass transition temperature of the matrix. Furthermore, moisture absorption can be divided into two stages and temperature affects the moisture absorption of CFRP. Microscopically, the morphology and bonding conditions between fiber and resin is found to change significantly on the microscale as a result of various temperatures and hydrothermal aging.
引用
收藏
页数:11
相关论文
共 50 条
  • [41] Preparation and compressive properties of carbon fiber reinforced braided composite circular tubes
    Gu Y.
    Zhang D.
    Jia M.
    Qian K.
    Fangzhi Xuebao/Journal of Textile Research, 2019, 40 (07): : 71 - 77
  • [42] Experimental and numerical crashworthiness investigation of 3D printing carbon fiber reinforced nylon origami tubes
    Jiang, Zhiyu
    Zhao, Jian
    Chen, Weidong
    Lv, Huanlin
    POLYMER COMPOSITES, 2024, 45 (04) : 3296 - 3314
  • [43] Thermal Deformation of Carbon Fiber Reinforced Composite by Cure Shrinkage
    Choi, Eun-Seong
    Kim, Wie-Dae
    COMPOSITES RESEARCH, 2018, 31 (06): : 404 - 411
  • [44] INFLUENCE OF THERMAL SPIKING ON PROPERTIES OF CARBON-FIBER REINFORCED PLASTIC
    ANKARA, A
    WEISGERBER, D
    VILSMEIER, J
    MATERIALS SCIENCE AND TECHNOLOGY, 1986, 2 (11) : 1081 - 1085
  • [45] Thermal Residual Stress Distribution in Carbon Fiber/Novel Thermal Plastic Composite
    Lu, Chun
    Chen, Ping
    Yu, Qi
    Gao, Julong
    Yu, Baijie
    APPLIED COMPOSITE MATERIALS, 2008, 15 (03) : 157 - 169
  • [46] Thermal Residual Stress Distribution in Carbon Fiber/Novel Thermal Plastic Composite
    Chun Lu
    Ping Chen
    Qi Yu
    Julong Gao
    Baijie Yu
    Applied Composite Materials, 2008, 15 : 157 - 169
  • [47] Compression response of fiber reinforced composite tubes
    Elawadly, KM
    Esmail, ES
    AbouElwafa, MS
    Blanchard, JP
    ElGammal, MA
    ADVANCED COMPOSITE MATERIALS, 1996, 5 (04) : 269 - 281
  • [48] Improvement of thermal and mechanical properties of carbon fiber reinforced plastic composite with exfoliated hexagonal boron nitride particles
    Tominaga, Yuichi
    Shimamoto, Daisuke
    Hotta, Yuji
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2016, 124 (08) : 808 - 812
  • [49] Crashworthiness of Thermoplastic Woven Glass Fabric Reinforced Composite Tubes Manufactured by Pultrusion
    Mingrui Liu
    Biao Yan
    Xiongqi Peng
    Fujun Peng
    Lidong Wang
    Fibers and Polymers, 2020, 21 : 416 - 427
  • [50] Crashworthiness of GFRP composite tubes after aggressive environmental aging in seawater and soil
    Sebaey, Tamer Ali
    COMPOSITE STRUCTURES, 2022, 284