Flexural behavior of cold-formed thin-walled steel-glulam composite beams

被引：3
|
作者：
Li, Guodong [1 ]
Zhang, Wen [1 ]
Li, Xiang [1 ]
Yang, Bei [1 ]
机构：
[1] Northeast Forestry Univ, Sch Civil Engn, Harbin, Peoples R China
来源：
WOOD MATERIAL SCIENCE & ENGINEERING | 2023年 / 18卷 / 01期
关键词：
Cold-formed thin-walled steel; glulam; composite beam; bending capacity; ultimate capacity; TIMBER;
D O I：
10.1080/17480272.2021.2019308
中图分类号：
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号：
0805 ; 080502 ; 0822 ;
摘要：
A bending test was carried out on eight composite beams made of spruce and steel-glued laminated timber (glulam). The failure mode and failure mechanism of the component were analyzed through experiments, and the influence of different section sizes on the bending performance of composite beams was studied. Test results show that with the increase of the cross-section of glulam by 200%, the flexural capacity of the composite beam increases by 16.08%-20.70%, and with the increase of the thickness of the steel by 50%, the flexural capacity of the composite beam increases by 33.73%-37.69%. The influence of the glulam width and steel thickness was studied by using a finite-element model to evaluate the composite beams' bending performance. Based on the experimental results and finite-element model, a formula for calculating the flexural bearing capacity of cold-formed thin-walled steel-glulam composite beams is proposed.
引用
收藏
页码：289 / 302
页数：14
相关论文
共 50 条
  • [21] Finite Element Analysis of Flexural Behaviour of Cold-formed Thin-Walled Steel Composite Wall for Building Cladding
    Di, Yanqiang
    Zhang, Yuxia
    Li, Guohua
    Zhang, Zhijie
    Wang, Quan
    Li, Mengying
    6TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND CIVIL ENGINEERING, 2020, 455
  • [22] Simplified Calculation Model of Cold-formed Thin-walled Steel Composite Wall
    Guan Y.
    Zhou X.
    Shi Y.
    Li S.
    Nie S.
    Yao X.
    Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences, 2023, 50 (01): : 59 - 68
  • [23] Seismic behavior of cold-formed thin-walled steel plate shear wall
    Zhou X.
    Zou Y.
    Xu L.
    Yao X.
    Shi Y.
    Guan Y.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2020, 41 (05): : 65 - 75
  • [24] Experimental study on mechanical behavior of cold-formed thin-walled steel bamboo plywood composite slabs
    Li, Yu-Shun
    Shan, Wei
    Han, Tian-Shi
    Shen, Huang-Ying
    Zhang, Wang-Li
    Harbin Gongye Daxue Xuebao/Journal of Harbin Institute of Technology, 2009, 41 (SUPPL. 2): : 101 - 105
  • [25] Research on the Shear Performance of Cold-Formed Thin-Walled Steel-Glued Laminated Wood Composite Beams
    Yang, Haixu
    Guo, Yue
    Wang, Haibiao
    Jiang, Zihang
    BUILDINGS, 2023, 13 (12)
  • [26] Structural behavior of sigma-type thin-walled cold-formed steel beams reinforced with CFRP textile
    Rzeszut, Katarzyna
    Dybizbański, Maciej Adam
    ce/papers, 2023, 6 (3-4) : 11 - 15
  • [27] Cold-formed Thin-walled Steel Framing Residential system
    Zhang Yuhua
    INDUSTRIAL ENGINEERING AND APPLIED RESEARCH, 2014, 620 : 183 - 186
  • [28] Experimental study on flexural performance of cold-formed thin-walled steel beam-cement fiberboard composite slabs
    Wang L.
    Zhou B.
    Li J.
    Pan L.
    Jianzhu Jiegou Xuebao/Journal of Building Structures, 2021, 42 : 65 - 73
  • [29] Study on Shear Capacity of Cold-Formed Thin-Walled Steel Composite Walls with Openings
    Li, Yuanqi
    Yang, Jingkai
    SUSTAINABLE DEVELOPMENT OF URBAN ENVIRONMENT AND BUILDING MATERIAL, PTS 1-4, 2012, 374-377 : 1738 - 1741
  • [30] Literature review of shear performance of cold-formed thin-walled steel composite walls
    Xiao, Y. (yanxiao@hnu.edu.cn), 1600, Science Press (35):
12345