Reduction in Fuel Consumption in Biomass-Fired Power Plant Using Hybrid Drying System

被引:0
|
作者
Chantasiriwan, Somchart [1 ]
机构
[1] Thammasat Univ, Fac Engn, Thammasat Sch Engn, Pathum Thani 12120, Thailand
关键词
thermodynamics; waste heat; regeneration; flue gas dryer; steam dryer; WASTE HEAT-RECOVERY; FLUE-GAS; THERMODYNAMIC ANALYSIS; OPTIMUM INSTALLATION; AIR HEATER; DRYER; INTEGRATION; INCREASE; DESIGN;
D O I
10.3390/en16176225
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Fuels used in biomass power plants usually have high moisture contents. Two methods of fuel drying that have been proposed are steam drying and flue gas drying. Steam drying requires extracted steam as its energy source, whereas flue gas drying requires flue gas leaving the boiler as its energy source. Previous works have mostly been concerned with the integration of either dryer in a power plant. There have been a few investigations on the integration of both dryers. This paper proposes a novel hybrid drying system that uses a steam dryer to dry a portion of the fuel. Exhaust vapor from the steam dryer is then used for the heating of combustion air, which increases the flue gas temperature. The higher flue gas temperature increases the potential of the flue gas dryer, which is used to dry another portion of the fuel. It is shown that the hybrid drying system is capable of reducing fuel consumption to 7.76% in a 50 MW power plant. Furthermore, the integration of hybrid drying is shown to be economically justified because the simple payback period is 4.28 years.
引用
收藏
页数:14
相关论文
共 50 条
  • [41] CO2 mitigation by biomass-fired power generation in Japan
    Hanaoka, Toshiaki
    Yokoyama, Shin-Ya
    International Energy Journal, 2003, 4 (02): : 99 - 103
  • [42] Optimisation of biomass-fired cogeneration plants using ORC technology
    Swierzewski, Mateusz
    Kalina, Jacek
    RENEWABLE ENERGY, 2020, 159 : 195 - 214
  • [43] Circular Economy Practices in Biomass-Fired Power Plants in Brazil: An Assessment Using the ReSOLVE Framework
    Pereira, Juliana Araujo
    Simioni, Flavio Jose
    Soares, Juliana Ferreira
    do Rosario, Jeane de Almeida
    Bertol, Eduardo
    Souza, Fabio Murilo Padilha
    Coelho Junior, Luiz Moreira
    SUSTAINABILITY, 2024, 16 (21)
  • [44] Dynamic simulation of a biomass-fired steam power plant: A comparison between causal and a-causal modular modeling
    Casella, F.
    van Putten, J. G.
    Colonna, P.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2007, VOL 6: ENERGY SYSTEMS: ANALYSIS, THERMODYNAMICS AND SUSTAINABILITY, 2008, : 205 - 216
  • [45] Analysis of a biomass-fired CCHP system considering different design configurations
    Caliano, Martina
    Bianco, Nicola
    Graditi, Giorgio
    Mongibello, Luigi
    8TH INTERNATIONAL CONFERENCE ON APPLIED ENERGY (ICAE2016), 2017, 105 : 1683 - 1691
  • [46] Chemical looping combustion integrated Organic Rankine Cycled biomass-fired power plant - Energy and exergy analyses
    Sikarwar, Shailesh Singh
    Surywanshi, Gajanan Dattarao
    Patnaikuni, Venkata Suresh
    Kakunuri, Manohar
    Vooradi, Ramsagar
    RENEWABLE ENERGY, 2020, 155 : 931 - 949
  • [47] Chemical looping combustion integrated Organic Rankine Cycled biomass-fired power plant – Energy and exergy analyses
    Sikarwar, Shailesh Singh
    Surywanshi, Gajanan Dattarao
    Patnaikuni, Venkata Suresh
    Kakunuri, Manohar
    Vooradi, Ramsagar
    Vooradi, Ramsagar (ramsagar@nitw.ac.in), 1600, Elsevier Ltd (155): : 931 - 949
  • [48] The establishment of a micro-scale heat market using a biomass-fired district heating system
    Tihamér Tibor Sebestyén
    Matija Pavičević
    Hrvoje Dorotić
    Goran Krajačić
    Energy, Sustainability and Society, 10
  • [49] Exergy/cost-based optimization of a hybrid plant including CAES system, heliostat solar field, and biomass-fired gas turbine cycle
    Takleh, H. Rostamnejad
    Zare, V.
    Mohammadkhani, F.
    ENERGY, 2025, 318
  • [50] The behavior of inorganic material in biomass-fired power boilers: field and laboratory experiences
    Baxter, LL
    Miles, TR
    Miles, TR
    Jenkins, BM
    Milne, T
    Dayton, D
    Bryers, RW
    Oden, LL
    FUEL PROCESSING TECHNOLOGY, 1998, 54 (1-3) : 47 - 78