Hydrogen flow rate control in a liquid organic hydrogen carrier batch reactor for hydrogen storage

Liquid Organic Hydrogen Carriers (LOHCs) feature a highly variable rate of hydrogen release if held at constant pressure and temperature, but in real-life applications hydrogen release must be controlled to match end-user demand. The aim of this paper is to provide an overall assessment of LOHC systems' controllability, within a general framework regardless of the specific application field. Hydrogen discharge can be controlled through the reactor pressure and temperature; thus, a PI controller is introduced acting on three control variables independently: discharge pressure; thermal fluid inlet temperature; thermal fluid mass flow rate. A quantile analysis is performed on the uncontrolled hydrogen release: practical values of the energy-to-power ratios for LOHC systems are 2-6 h. A normalised release time is introduced to assess the efficiency of the control system. Temperature control leads to the best results, with an efficiency higher than 90% for the entire load range, while pressure control leads to satisfactory performance only at low loads. The mass flow rate control is the least effective, with efficiencies always below 80%. Sensitivity analysis highlights the temperature control strategy as the best fit to enhance controllability across the whole power range. Pressure control presents a more variable trend. (c) 2023 The Authors. Published by Elsevier Ltd on behalf of Hydrogen Energy Publications LLC. This is an open access article under the CC BY-NC-ND license (http:// creativecommons.org/licenses/by-nc-nd/4.0/).