Treatment of paraffin deposition behavior in gas-condensate wells with chemical inhibitors

被引:2
|
作者
Shi, Bowen [1 ]
Hong, Jiajun [1 ]
Wang, Zhihua [1 ]
Chang, Zhenbo [1 ]
Li, Feng [2 ]
机构
[1] Northeast Petr Univ, Key Lab Enhanced Oil & Gas Recovery Minist Educ, Minist Educ, Daqing 163318, Peoples R China
[2] Gree Energy Serv Inc, Shenzhen 518100, Guangdong, Peoples R China
基金
中国国家自然科学基金;
关键词
Paraffin deposition; Paraffin crystal modifier; Phase behavior; Deposition rate; Gas-condensate wells; WAX DEPOSITION; PHASE-BEHAVIOR; CRUDE-OIL; PERFORMANCE; DIFFUSION; PRESSURE; FINGER; FIELD;
D O I
10.1007/s13202-023-01716-0
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
As deep gas-condensate reservoirs are explored, the problem of paraffin deposition is becoming more prominent. Therefore, this paper collects condensate samples from representative paraffin deposition gas-condensate wells and analyzes basic physical properties. The cold plate deposition device is employed to study paraffin deposition behavior under well conditions and to divide the critical regions for paraffin deposition in gas-condensate wells. The experimental apparatus, such as the crude oil dynamic paraffin deposition rate tester, is utilized to investigate the preventive effect of paraffin dispersants and paraffin crystal modifier. The results show that there is significant phase change behavior in gas-condensate wells and gas phase is dominant form, but there is also phase evolution. It can be identified from the experiments that paraffin deposition is mainly located in the 1000 similar to 1500 m region, and a paraffin deposition identification chart has been established. The maximum deposition rate could reach 15.50 mm/year, which matched the temperature and pressure conditions of 45 celcius and 70 MPa. The preventive effect of paraffin crystal modifiers greatly exceeds that of paraffin dispersants, with paraffin prevention rates of 85-95% at the optimal concentrations of 0.25-0.50 wt.%. The dissolving paraffin rate can reach 0.0169 g/min. It decreases the paraffin appearance temperature approximately 40% and significantly changes the paraffin crystal morphology. Increased deposition surface area of the cold plate structural design describes the paraffin deposition. This diagram facilitates the reliable identification of paraffin deposition areas and the deposition rates in the wellbore during production. The optimum amounts of BZ and PI paraffin inhibitors are quantified. This study provides a comprehensive understanding of the paraffin deposition behavior, and scientific basis and guidance for the selection of paraffin inhibitors in gas-condensate wells.
引用
收藏
页码:535 / 553
页数:19
相关论文
共 50 条