The through-thickness thermal conductivity and heat transport mechanism of carbon fiber three-dimensional orthogonal woven fabric composite

被引:3
|
作者
Li, Yuwei [1 ]
Li, Lei [1 ]
Li, Yuanyuan [1 ]
Wang, Hailou [2 ]
Wang, Ping [1 ]
Zhang, Yan [1 ]
机构
[1] Soochow Univ, Coll Text & Clothing Engn, Natl Engn Lab Modern Silk, Suzhou, Peoples R China
[2] Nantong Univ, Sch Text & Clothing, Nantong, Peoples R China
关键词
Carbon fibers; three-dimensional orthogonal woven fabric; thermal properties; laser flash method; NANOTUBES; FILLER;
D O I
10.1080/00405000.2023.2201029
中图分类号
TB3 [工程材料学]; TS1 [纺织工业、染整工业];
学科分类号
0805 ; 080502 ; 0821 ;
摘要
This paper successfully constructed a high through-thickness thermal conductivity carbon fiber composite with three-dimensional orthogonal woven fabric (3DOWF) by taking advantage of the high conductivity of carbon fiber. The effect of structural parameters and Z-direction bundling yarn (Z-yarn) on thermal conductivity (TC) was investigated, and thermal transport mechanism was analyzed. The results show that the TC in the through-thickness direction of 3DOWFs increase dramatically after adding Z-yarn structure, reaching up to 4.12 W/m/K, which is 116% higher than the laminated sample. A plane heat source was established to record the temperature-time curves of the composites, and results show that the composites with higher TC have faster equilibrium time and higher equilibrium temperature. Infrared thermography demonstrates the difference of thermal response process between 3DOWF and laminated material. To sum up, a large amount of heat energy can be transferred rapidly from hot surface to cold one through these Z-yarn paths in the thermal conductive network of 3DOWF, which has potential application in composite with high thermal conductivity.
引用
收藏
页码:308 / 315
页数:8
相关论文
共 50 条
  • [41] Improving through-thickness conductivity of carbon fiber reinforced polymer using carbon nanotube/polyethylenimine at the interlaminar region
    Robert, Colin
    Thitasiri, Witiwat Best
    Mamalis, Dimitrios
    Hussein, Zakareya Elmo
    Waqas, Muhammad
    Ray, Dipa
    Radacsi, Norbert
    Koutsos, Vasileios
    JOURNAL OF APPLIED POLYMER SCIENCE, 2021, 138 (05)
  • [42] Ballistic behavior of three-dimensional orthotropic woven fabric using virtual-fiber model
    Zhang, Jian
    Zhou, Yi
    Lu, Zhenqian
    Yue, Jianing
    Han, Jing
    Zhou, Kanghui
    Liu, Shengkai
    Jiang, Qian
    Wu, Liwei
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2025, 286
  • [43] INFLUENCE OF Z-ALIGNED CARBON NANOFIBERS ON THE THROUGH-THICKNESS THERMAL CONDUCTIVITY OF PARAFFIN WAX
    Scruggs, Alexander M.
    Kirmse, Sebastian
    Hsiao, Kuang-Ting
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 8, 2017,
  • [44] Permeabilities along fiber direction of ramie bundles and through-thickness of ramie fabric stack for liquid composite molding
    Ma, Quansheng
    Yang, Zhongjia
    Gu, Yizhuo
    Li, Min
    Wang, Shaokai
    Zhang, Zuoguang
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2017, 36 (01) : 40 - 52
  • [45] Improving thermal conductivity of reduced-activation ferritic/martensitic steel using three-dimensional woven copper fiber
    Cho, Yong Hwan
    Yang, Hyun Joon
    Jeong, Kyeongjae
    Lee, Chang-Hoon
    Hong, Soon-Jik
    Yu, Woong-Ryeol
    Han, Heung Nam
    FUSION ENGINEERING AND DESIGN, 2023, 197
  • [46] Tensile and Compressive Properties of Woven Fabric Carbon Fiber-Reinforced Polymer Laminates Containing Three-Dimensional Microvascular Channels
    An, Ziqian
    Cheng, Xiaoquan
    Zhao, Dafang
    Ma, Yihao
    Guo, Xin
    Cheng, Yujia
    POLYMERS, 2024, 16 (05)
  • [47] Computational schemes on the bending fatigue deformation and damage of three-dimensional orthogonal woven composite materials
    Sun, Baozhong
    Wang, Jinhua
    Wu, Liwei
    Fang, Fang
    Gu, Bohong
    COMPUTATIONAL MATERIALS SCIENCE, 2014, 91 : 91 - 101
  • [48] Elastic and fracture behavior of three-dimensional ply-to-ply angle interlock woven composites: Through-thickness, size effect, and multiaxial tests
    Li, Weixin
    Qiao, Yao
    Fenner, Joel
    Warren, Kyle
    Salviato, Marco
    Bazant, Zdenek P.
    Cusatis, Gianluca
    COMPOSITES PART C: OPEN ACCESS, 2021, 4
  • [49] Three-dimensional carbon fiber composite printer for CFRP repair
    Kim, Ho-Jin
    Kim, Hyung-Soo
    Lee, Gil-Yong
    Kim, Min-Soo
    Min, Soo-Hong
    Keller, Rusty
    Ihn, Jeong-Beom
    Ahn, Sung-Hoon
    COMPOSITES PART B-ENGINEERING, 2019, 174
  • [50] Multiscale Recursive Micromechanics of Three-Dimensional Woven Composite Thermal Protection Materials Thermal Conductivities
    Bednarcyk, Brett A. A.
    Ricks, Trenton M. M.
    Pineda, Evan J. J.
    Murthy, Pappu L. N.
    Mital, Subodh K. K.
    Hu, Zhong
    Gustafson, Peter A. A.
    AIAA JOURNAL, 2022, 60 (12) : 6506 - 6519