Three mechanical relaxation modes associated with nanoscale structural heterogeneity in Pd42.5Ni7.5Cu30P20 fragile glass

被引:2
|
作者
Wang, Hao [1 ]
Ichitsubo, Tetsu [1 ]
Kato, Hidemi [1 ]
机构
[1] Tohoku Univ, Inst Mat Res, Sendai 9808577, Japan
来源
EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS | 2023年 / 98卷
关键词
INTERNAL-FRICTION; BETA-RELAXATION; TRANSITION; VISCOELASTICITY; LA55AL25NI20; TEMPERATURE; DEPENDENCE;
D O I
10.1051/epjap/2022220266
中图分类号
O59 [应用物理学];
学科分类号
摘要
The dynamic relaxation behavior of Pd42.5Ni7.5Cu30P20 metallic glass was studied at 173-563 K (similar to 0.98T(g)) and at angular frequency 10(-2) to 10(2) rad s(-1). Master curves of 16-digit dynamic moduli at angular frequency 10(-4) - 10(12) rad s(-1) were constructed and characterized by the stretched exponent relaxation function, which exhibits three discrete relaxation modes with different activation energies, i.e., alpha-relaxation (7.98 eV) associated with the cooperative motion of similar to 5 atoms, slow beta-relaxation (1.39 eV) associated with single atomic diffusion, and fast beta-relaxation (0.25 eV) associated with rattling motion. These three modes were also detected as slope changes on the quasi-static creep compliance under an isochronal heating process, which was successfully reproduced by dynamic complex compliance using the dynamic moduli with fitting parameters related to the considerable inhomogeneous structural characteristics, elastic modulus and volume fraction, generated in the glass.
引用
收藏
页数:8
相关论文
共 50 条
  • [21] Precise measurement of density in the isothermal relaxation processes of Pd42.5CU30Ni7.5P20 and Zr50CU40Al10 glasses
    Haruyama, Osami
    Yokoyama, Yoshihiko
    Inoue, Akihisa
    MATERIALS TRANSACTIONS, 2007, 48 (07) : 1708 - 1710
  • [22] Glass-forming ability of Pd42.5Cu30Ni7.5P20 alloy with a low critical cooling rate of 0.067 K/s
    Nishiyama, N
    Inoue, A
    APPLIED PHYSICS LETTERS, 2002, 80 (04) : 568 - 570
  • [23] Isothermal crystallization kinetics analysis of melt-spun Pd 42.5Cu30Ni7.5P20 amorphous ribbons
    Xu, Feng
    Jiang, Jianzhong
    Cao, Qingping
    Du, Youwei
    Journal of Alloys and Compounds, 2005, 392 (1-2): : 173 - 176
  • [24] Isothermal crystallization kinetics analysis of melt-spun Pd42.5CU30Ni7.5P20 amorphous ribbons
    Xu, F
    Jiang, JZ
    Cao, QP
    Du, YW
    JOURNAL OF ALLOYS AND COMPOUNDS, 2005, 392 (1-2) : 173 - 176
  • [25] Effect of volume fraction and geometry of pores on mechanical properties of porous bulk glassy Pd42.5 Cu30 Ni7.5 P20 alloys
    Wada T.
    Kinaka M.
    Inoue A.
    Journal of Materials Research, 2006, 21 (4) : 1041 - 1047
  • [26] Structural relaxation process in a bulk Pd40Cu30Ni10P20 metallic glass with a high Kauzmann temperature
    Haruyama, O
    Tando, M
    Kimura, HM
    Nishiyama, N
    Inoue, A
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2002, 312-14 : 603 - 607
  • [27] Study on the structure relaxation of Pd40Ni10Cu30P20 bulk metallic glass
    Wang, JF
    Liu, L
    Zou, H
    Pu, J
    Xiao, JZ
    RARE METAL MATERIALS AND ENGINEERING, 2005, 34 (01) : 98 - 101
  • [28] Nanoporous palladium fabricated from an amorphous Pd42.5Cu30Ni7.5P20 precursor and its ethanol electro-oxidation performance
    Dan, Zhenhua
    Qin, Fengxiang
    Wada, Takeshi
    Yamaura, Shin-ichi
    Xie, Guoqiang
    Sugawara, Yu
    Muto, Izumi
    Makino, Akihiro
    Hara, Nobuyoshi
    ELECTROCHIMICA ACTA, 2013, 108 : 512 - 519
  • [29] CREEP AND STRUCTURAL RELAXATION IN PD40NI40P20 GLASS
    DENG, D
    ZHENG, F
    XU, Y
    QI, G
    ARGON, AS
    ACTA METALLURGICA ET MATERIALIA, 1993, 41 (04): : 1089 - 1107