Natural aging of heterogeneous arc-welded AA6061-AA7075 joints with nanocomposite filler

被引：4
|
作者：
Murali, Narayanan [1 ]
Zheng, Shiqi [1 ]
Chi, Yitian [2 ]
Li, Xiaochun [1 ,2 ]
机构：
[1] Univ Calif Los Angeles, Dept Mat Sci & Engn, Los Angeles, CA 90095 USA
[2] Univ Calif Los Angeles, Dept Mech & Aerosp Engn, Los Angeles, CA 90095 USA
来源：
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING | 2023年 / 28卷 / 04期
关键词：
welding; nanocomposites; aluminium alloys; mechanical properties; microstructure; natural aging; MECHANICAL-PROPERTIES; MICROSTRUCTURE; SOLIDIFICATION; ALUMINUM; BEHAVIOR; CAST;
D O I：
10.1080/13621718.2022.2148066
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
We report the dissimilar joining of aluminium alloys 6061 and 7075 using filler rods nano-treated with TiC nanoparticles. TiC enables the formation of a fine and equiaxial weld metal microstructure while preventing the formation of hot cracks. Dissimilar joints were also naturally aged, and their strength evolutions were tracked over 8 weeks and compared to a nano-treated, homogeneous AA7075 joint. Heterogeneous weld metals regained over 30 HV with a mix of MgZn2 and Mg2Si strengthening phases. Nano-treatment thus shows great promise, being able to facilitate the fusion welding of a traditionally difficult-to-weld system and enable a natural aging response between two artificially aged alloys.
引用
收藏
页码：249 / 258
页数：10
相关论文
共 50 条
  • [21] Microstructural and Mechanical Behaviors of Friction Stir Welded Dissimilar AA6082-AA7075 Joints
    Sezhian, M. Vetrivel
    Giridharan, K.
    Pushpanathan, D. Peter
    Chakravarthi, G.
    Stalin, B.
    Karthick, Alagar
    Kumar, P. Manoj
    Bharani, Murugesan
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2021, 2021
  • [22] Parametric Optimization of FSWed Dissimilar Composite Joints of AA7075 and AA6061 Using RSM
    Mishra, R. S.
    Jain, Sumit
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2023, 76 (11) : 2993 - 3006
  • [23] Experimental investigation of hardness of FSW and TIG joints of Aluminium alloys of AA7075 and AA6061
    Patil, Chetan
    Patil, Hemant
    Patil, Hiralal
    FRATTURA ED INTEGRITA STRUTTURALE, 2016, 37 (37): : 325 - 332
  • [24] Parametric Optimization of FSWed Dissimilar Composite Joints of AA7075 and AA6061 Using RSM
    R. S. Mishra
    Sumit Jain
    Transactions of the Indian Institute of Metals, 2023, 76 : 2993 - 3006
  • [25] Microstructural study in AA7075 alloys welded with different filler metals
    Juan Manuel Salgado L.
    Abraham Silva Hernandez
    Francisco Ignacio LópezMonroy
    José Luis Ojeda Elizarráras
    Jesús Mauricio Tello Rico
    MRS Advances, 2019, 4 : 3017 - 3029
  • [26] Microstructural study in AA7075 alloys welded with different filler metals
    Salgado L., Juan Manuel
    Silva Hernandez, Abraham
    Lopez Monroy, Francisco Ignacio
    Ojeda Elizarraras, Jose Luis
    Tello Rico, Jesus Mauricio
    MRS ADVANCES, 2019, 4 (55-56) : 3017 - 3029
  • [27] Strain and damage analysis using high resolution digital image correlation in the stir zone of an AA6061-AA7075 dissimilar friction stir weld
    Dimov, Nicolas
    Weisz-Patrault, Daniel
    Tanguy, Alexandre
    Sapanathan, Thaneshan
    Benoist, Julien
    Charkaluk, Eric
    Simar, Aude
    MATERIALS TODAY COMMUNICATIONS, 2023, 34
  • [28] Effect of Tool Positioning Factors on the Strength of Dissimilar Friction Stir Welded Joints of AA7075-T6 and AA6061-T6
    Ghiasvand, Amir
    Noori, Saja Mohammed
    Suksatan, Wanich
    Tomkow, Jacek
    Memon, Shabbir
    Derazkola, Hesamoddin Aghajani
    MATERIALS, 2022, 15 (07)
  • [29] Influence of Metal Transfer Modes and Postweld Heat Treatment on Tensile Properties of Gas Metal Arc-Welded AA6061-T6 Aluminum Alloy Joints
    Ramaswamy, Addanki
    Malarvizhi, S.
    Balasubramanian, V
    MATERIALS PERFORMANCE AND CHARACTERIZATION, 2020, 9 (01) : 9 - 24
  • [30] Mechanical strength and corrosion behavior of dissimilar friction stir welded AA7075-AA2014 joints
    Raturi, Madhav
    Bhattacharya, Anirban
    MATERIALS CHEMISTRY AND PHYSICS, 2021, 262
12345