Analysis of Mechanical Strain in AlGaN/GaN HFETs

Herein, the influence of mechanical strain induced by passivation layers on the electrical performance of AlGaN/GaN heterostructure field-effect transistor is investigated. We studied the physical mechanism of a threshold voltage (V-th) shift for the monolithically fabricated on/off devices reported earlier by our group. For that, theoretical calculations, simulation-based analysis, and nano-beam electron diffraction (NBED) measurements based on STEM are used. Strain distribution in the gate vicinity of transistors is compared for a SiNx passivation layer with intrinsic stress from approximate to 0.5 to -1 GPa for normally on and normally off devices, respectively. The strain in epitaxial layers transferred by intrinsic stress of SiNx is quantitatively evaluated using NEBD method. Strain dissimilarity Delta epsilon = 0.23% is detected between normally on and normally off devices. Using this method, quantitative correlation between 1.13 V of V-th shift and microscopic strain difference in the epitaxial layers caused by 1.5 GPa intrinsic stress variation in passivation layer is provided. It is showed in this correlation that about half of the reported threshold voltage shift is induced by strain, i.e., by the piezoelectric effect. The rest of V-th shift is caused by the fabrication process. Therefore, various components/mechanisms contributing to the measured V-th shift are distinguished.