Multi-Response Optimization in MQLC Machining Process of Steel St50-2 Using Grey-Fuzzy Technique

被引：4

作者：

Dragicevic, Mario ^{[1
]}

Begovic, Edin ^{[1
]}

Ekinovic, Sabahudin ^{[1
]}

Peko, Ivan ^{[2
]}

机构：

[1] Univ Zenica, Fac Mech Engn, Fak 1, Zenica 72000, Bosnia & Herceg

[2] Univ Split, Fac Sci, Rudera Boskovica 33, Split 21000, Croatia

来源：

TEHNICKI VJESNIK-TECHNICAL GAZETTE | 2023年 / 30卷 / 01期

关键词：

grey relational analysis; fuzzy logic; MQLC system; multi-response optimization; steel; SURFACE INTEGRITY;

D O I：

10.17559/TV-20220222080715

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper MQLC turning process of steel St 50-2 is presented. Experimentations were performed using Taguchi L9 orthogonal array by varying two process parameters such as oil and water quantity while other parameters such as cutting speed, feed rate and depth of cut were kept constant. Process responses that were analyzed in this paper are surface roughness Ra and resultant cutting force Frez. In order to quantify significance of each process parameter on analyzed response ANOVA was conducted. Fuzzy logic modelling technique was used to describe the effects of process parameters and to create response surface plots. Finally, in order to find out process parameters values that lead simultaneously to optimal surface roughness and resultant cutting force, multi-objective optimization of process responses was conducted by using grey relational analysis (GRA) combined with fuzzy logic technique.

引用

页码：248 / 255

页数：8

共 50 条

[31] Multi-response milling process optimization using the Taguchi method coupled to grey relational analysis
Shankar, Subramaniam
Mohanraj, Thangamuthu
Karuppusamy, Sevagoundanoor
MATERIALS TESTING, 2016, 58 (05) : 462 - 470
[32] Drilling process optimization by using fuzzy-based multi-response surface methodology
Boyaci, A., I
Hatipoglu, T.
Balci, E.
ADVANCES IN PRODUCTION ENGINEERING & MANAGEMENT, 2017, 12 (02): : 163 - 172
[33] Generalized approach for multi-response machining process optimization using machine learning and evolutionary algorithms
Ghosh, Tamal
Martinsen, Kristian
ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH, 2020, 23 (03): : 650 - 663
[34] Parametric optimization of wire electric discharge machining on AISI4140 alloy steel using regression analysis and grey-fuzzy approach
Guha, Spandan
Das, Partha Protim
Routara, Bharat Chandra
MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 4734 - 4740
[35] Multi-response optimization in wire electrical discharge machining (WEDM) of D2 steel using utility approach
Nayak, Ipsita
Rana, Jaydev
MANUFACTURING REVIEW, 2021, 8
[36] Multi-response optimization of process parameters using Desirability Function Analysis during machining of EN31 steel under different machining environments
Sharma, Vijay Kumar
Rana, Mohit
Singh, Talvinder
Singh, Anoop Kumar
Chattopadhyay, Kashidas
MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 3121 - 3126
[37] Multi-response optimization and effect of process parameters during machining of inconel X-750 using grey relational analysis and analysis of variance
Bhise, Vishal Y.
Jogi, Bhagwan F.
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024,
[38] Multi-response optimization for machining GFRP composites using GRA and DFA
Neeli, Naresh
Jenarthanan, M. P.
Kumar, Dileep G.
MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES, 2018, 14 (03) : 482 - 496
[39] Multi-Response Optimization of Electrical Discharge Machining Using the Desirability Function
Swiercz, Rafal
Oniszczuk-Swiercz, Dorota
Chmielewski, Tomasz
MICROMACHINES, 2019, 10 (01)
[40] Multi-response Optimization in Machining Inconel-625 by Abrasive Water Jet Machining Process Using WASPAS and MOORA
Reddy, P. Venkateshwar
Kumar, G. Suresh
Kumar, V. Satish
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2020, 45 (11) : 9843 - 9857

← 1 2 3 4 5 →