Research on laser induced plasma ignition of gas oxygen/methane

被引:0
|
作者
Zhu, Shaohua [1 ]
Huang, Yuxiang [1 ]
Li, Lingyu [2 ]
Wei, Xianggeng [1 ]
Liu, Bing [1 ]
机构
[1] Northwestern Polytech Univ, Internal Flow & Thermo Struct Lab, Sci & Technol Combust, Xian 710072, Peoples R China
[2] Shaanxi Appl Phys & Chem Res Inst, Xian 710061, Peoples R China
基金
中国国家自然科学基金;
关键词
Oxygen/methane; Laser-induced plasma ignition; Flame kernel development process; Rocket engine; HYDROGEN;
D O I
10.1016/j.actaastro.2024.01.015
中图分类号
V [航空、航天];
学科分类号
08 ; 0825 ;
摘要
Laser-induced plasma ignition is a new ignition method to achieve stable and reliable ignition of liquid rocket engines. It has the advantages of accurate and controllable ignition position, broadening ignition lean-burn limit and small disturbance to flow field. In this paper, the laser ignition process and combustion characteristics of gas oxygen/gas methane under rocket engine conditions are studied from four aspects, namely different ignition positions, ignition energy, fuel-oxygen momentum ratio and chamber pressure. Using a high-speed camera, the dynamic process of ignition was captured by the shadow method, and the generation and propagation of laserinduced flame nuclei were recorded. The results show that at the airflow velocity of 300-400 m/s, the time required for the flame kernel to develop to the entire combustion chamber is about 300 mu s, and the time for the flame to reach a steady state is tens of milliseconds. When the ignition energy is increased by 1.5 times, the time required for the flame kernel to develop from the recirculation zone to the mainstream zone is shortened to 1/3 of the original; with the increase of the fuel-oxygen momentum ratio, the shape of the initial flame kernel changes from round to oval, and the development speed of the flame kernel also increases. The fuel-oxygen momentum ratio increases from 0.59 to 2.75, and the time required for the flame kernel to develop from the recirculation zone to the mainstream zone decreases from 167 mu s to 56 mu s Except chamber pressure, other factors have no effect on the pressure rise rate of the ignition process, and the higher the chamber pressure, the faster the pressure rise rate; in order to avoid deflagration, the shear layer is more suitable as the ignition position. With the increase of ignition energy, fuel-oxygen momentum ratio and chamber pressure, the development speed of flame kernel increases, but the shape and development process of flame kernel will be different under the influence of different factors.
引用
收藏
页码:208 / 220
页数:13
相关论文
共 50 条
  • [41] A study of laser induced ignition of methane-air mixtures inside a Rapid Compression Machine
    Dumitrache, Ciprian
    Baumgardner, Marc
    Boissiere, Andrew
    Maria, Amir
    Roucis, John
    Marchese, Anthony J.
    Yalin, Azer
    PROCEEDINGS OF THE COMBUSTION INSTITUTE, 2017, 36 (03) : 3431 - 3439
  • [42] Laser-induced ignition of methane-air mixtures at pressures up to 4 MPa
    Kopecek, H
    Lackner, M
    Winter, F
    Wintner, E
    LASER PHYSICS, 2003, 13 (11) : 1365 - 1369
  • [43] Perspective of Laser-Induced Plasma Ignition of Hydrocarbon Fuel in Scramjet Engine
    Yang, Leichao
    Li, Xiaohui
    Liang, Jianhan
    Yu, Xin
    Li, Xipeng
    SELECTED PAPERS OF THE PHOTOELECTRONIC TECHNOLOGY COMMITTEE CONFERENCES HELD NOVEMBER 2015, 2016, 9796
  • [44] Study for plasma ignition in material induced by high-power laser irradiation
    Shen, ZH
    Lu, JA
    Ni, XW
    OPTICAL TECHNOLOGY IN FLUID, THERMAL, AND COMBUSTION FLOW III, 1997, 3172 : 721 - 723
  • [45] Cavity ignition of liquid kerosene in supersonic flow with a laser-induced plasma
    Li, Xiaohui
    Yang, Leichao
    Peng, Jiangbo
    Yu, Xin
    Liang, Jianhan
    Sun, Rui
    OPTICS EXPRESS, 2016, 24 (22): : 25362 - 25369
  • [46] Laser-Induced Plasma Ignition in a Cavity-Based Scramjet Combustor
    Cai, Zun
    Zhu, Jiajian
    Sun, Mingbo
    Wang, Zhenguo
    Bai, Xue-Song
    AIAA JOURNAL, 2018, 56 (12) : 4884 - 4892
  • [47] Ignition Time of Laser-Induced Film Plasma and Its Influence Factors
    Wang G.
    Su J.
    Xu J.
    Yang L.
    Wu S.
    Guangxue Xuebao/Acta Optica Sinica, 2017, 37 (04):
  • [48] Temperature Distribution Within an Ignition Kernel Initiated by a Laser-Induced Plasma
    Jo, Seunghyun
    Gore, Jay P.
    AIAA JOURNAL, 2024, 62 (06) : 2293 - 2302
  • [49] IGNITION OF EXPLOSIVE GAS MIXTURES BY ELECTRIC SPARKS .2. MINIMUM IGNITION ENERGIES AND QUENCHING DISTANCES OF MIXTURES OF METHANE, OXYGEN, AND INERT GASES
    BLANC, MV
    GUEST, PG
    VONELBE, G
    LEWIS, B
    JOURNAL OF CHEMICAL PHYSICS, 1947, 15 (11): : 798 - 802
  • [50] PLASMA TEMPERATURE IN LASER PULSE INDUCED GAS BREAKDOWN
    AHMAD, N
    KEY, MH
    JOURNAL OF PHYSICS PART B ATOMIC AND MOLECULAR PHYSICS, 1972, 5 (04): : 866 - &