Evaluation of a New Process for the Additive Manufacturing of Metal Antennas

被引：0

作者：

Arroyave, German A. Ramirez ^{[1
]}

Huertas, David L. Galindo ^{[2
]}

Cuervo, Daniel F. Garzon ^{[2
]}

Cerquera, Manuel R. Perez ^{[3
]}

Quintero, Liz K. Herrera ^{[2
]}

Quijano, Javier L. Araque ^{[2
]}

机构：

[1] Ecole Polytech Fed Lausanne EPFL, Lausanne, Switzerland

[2] Univ Nacl Colombia, Bogota, Colombia

[3] Pontificia Univ Javieriana, Bogota, Colombia

来源：

PROGRESS IN ELECTROMAGNETICS RESEARCH M | 2023年 / 117卷

关键词：

SHAPED MONOPOLE ANTENNA;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

This paper presents a new process for additively manufacturing purely metallic antennas based on Fused Deposition Modeling (FDM), with a proprietary filament developed using a hot extrusion method and composed by a mix of rounded shape copper powders with particle sizes in the range from 20 to 80 mu m embedded in a polymeric matrix, to accomplish the desired antenna shape; followed by a post-processing stage involving de-binding to remove the base polymer and a further sintering process for obtaining a purely metallic component. This new process is validated by means of a prototype antenna consisting on a modified tri-band cactus monopole that is manufactured and measured, exhibiting results in agreement with standard and alternative additive manufacturing techniques reported in the literature.

引用

页码：59 / 69

页数：11

共 50 条

[11] DAMAGE MODELING IN METAL ADDITIVE MANUFACTURING PROCESS SIMULATIONS
Fietek, C.
Sakai, J.
Love, A.
Park, Y. H.
PROCEEDINGS OF ASME 2023 PRESSURE VESSELS & PIPING CONFERENCE, PVP2023, VOL 2, 2023,
[12] Review of dynamic monitoring of metal additive manufacturing process
Wang F.
Yang S.
Lyu B.
Peng S.
Guo J.
Zhao Y.
Jisuanji Jicheng Zhizao Xitong/Computer Integrated Manufacturing Systems, CIMS, 2023, 29 (07): : 2245 - 2259
[13] Indirect Applications of Additive Manufacturing for Antennas
Lundquist, Jonathan D.
Linkous, Lauren
Hasni, Umar
Topsakal, Erdem
IEEE OPEN JOURNAL OF ANTENNAS AND PROPAGATION, 2023, 4 : 434 - 445
[14] New process chains involving additive manufacturing and metal forming - a chance for saving energy?
Bambach, Margarita D.
Bambach, Markus
Sviridov, Alexander
Weiss, Sabine
INTERNATIONAL CONFERENCE ON THE TECHNOLOGY OF PLASTICITY, ICTP 2017, 2017, 207 : 1188 - 1193
[15] Ka-band modulated metasurface antennas fabricated by metal additive manufacturing
Gonzalez-Ovejero, David
Ettorre, Mauro
Chahat, Nacer
Sauleau, Ronan
Maci, Stefano
Chattopadhyay, Goutam
2018 18TH INTERNATIONAL SYMPOSIUM ON ANTENNA TECHNOLOGY AND APPLIED ELECTROMAGNETICS (ANTEM 2018), 2018,
[16] Small Footprint Evaluation of Metal Coatings for Additive Manufacturing
Krkotic, Patrick
Aguasca, Albert
O'Callaghan, Juan M.
2018 48TH EUROPEAN MICROWAVE CONFERENCE (EUMC), 2018, : 882 - 885
[17] Controlling process instability for defect lean metal additive manufacturing
Minglei Qu
Qilin Guo
Luis I. Escano
Ali Nabaa
S. Mohammad H. Hojjatzadeh
Zachary A. Young
Lianyi Chen
Nature Communications, 13
[18] Additive manufacturing of metal components with the ARBURG plastic freeforming process
Spiller, Quirin
Fleischer, Juergen
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2018, 67 (01) : 225 - 228
[19] Selective Inhibition Sintering: The Process for Consumer Metal Additive Manufacturing
Torabi, Payman
Petros, Matthew
Khoshnevis, Behrokh
3D PRINTING AND ADDITIVE MANUFACTURING, 2014, 1 (03) : 152 - 155
[20] Ontology-based Process Map for Metal Additive Manufacturing
Roh, Byeong-Min
Kumara, Soundar R. T.
Witherell, Paul
Simpson, Timothy W.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (12) : 8784 - 8797

← 1 2 3 4 5 →