FEM-SPH Coupling Approach for Impact Response Analysis of Composite Plates with Brick-and-Mortar Structure

被引:3
|
作者
Xiao, Yihua [1 ,2 ]
Zou, Wenbing [1 ]
机构
[1] East China Jiaotong Univ, Sch Mechatron & Vehicle Engn, Nanchang 330013, Peoples R China
[2] East China Jiaotong Univ, Key Lab Conveyance & Equipment, Minist Educ, Nanchang, Peoples R China
基金
中国国家自然科学基金;
关键词
Coupling approach; FEM; SPH; composites; brick-and-mortar; HIGH-VELOCITY IMPACT; SMOOTHED PARTICLE HYDRODYNAMICS; FINITE-ELEMENT-METHOD; BEHAVIOR; SIMULATION; ALGORITHM; RESISTANCE; MESHLESS; POLYUREA; CONTACT;
D O I
10.1142/S0219876223500056
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Bioinspired nacre-like composites have attracted increasing research interests recently. They are typical composites with brick-and-mortar structure and usually employ a combination of hard material and soft material to achieve a good balance between stiffness and toughness. Impact response analysis of such composites is difficult due to their complex structure and interface. In this work, an effective finite element method-smoothed particle hydrodynamics (FEM-SPH) coupling approach is developed for impact response analysis of composite plates with brick-and-mortar structure. In the approach, hard material taking up the bulk of the composite plate is modeled with the SPH method, and soft material forming thin layer structures in the composite plate is modeled with FEM. A coupling algorithm considering failure behavior is proposed to model bonding interfaces between FEM parts and SPH parts. A particle-to-particle SPH contact algorithm is employed to handle contacts between SPH parts, and a penalty-based FEM-SPH contact algorithm is implemented to treat contacts between FEM parts and SPH parts. The developed coupling approach is used to calculate stress wave propagation in two bonded plates of the same material and different materials and a composite plate with brick-and-mortar structure. The accuracy of the coupling approach is validated by comparing the calculated results with those of analytical method and FEM. The coupling approach is then used to simulate the effects of some factors on the impact damage of composite plates with brick-and-mortar structure. The coupling approach can conveniently model the complex structure and bonding interface of the composite plates and is capable of capturing interface failure and fragmentation of the major composition of the composite plates during impact events. It provides a promising alternative for the impact response analysis of brick-and-mortar composite structures.
引用
收藏
页数:30
相关论文
共 49 条
  • [22] Analysis of structural response under blast loads using the coupled SPH-FEM approach
    Xu, Jun-xiang
    Liu, Xi-la
    JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A, 2008, 9 (09): : 1184 - 1192
  • [23] Error characteristic analysis of jet impact momentum law test apparatus based on a SPH-FEM coupling algorithm
    Yang S.
    Zhu X.
    Wang H.
    Yu P.
    Zhendong yu Chongji/Journal of Vibration and Shock, 2019, 38 (16): : 253 - 260
  • [24] Failure mode and response of a typical RC straight and skew highway girder bridge under the blast, wrapped with and without a non-Explosive Reactive armour using FEM-SPH coupling
    Saha, Shuvra
    Karmakar, Somnath
    ENGINEERING FAILURE ANALYSIS, 2024, 161
  • [25] Bandgap analysis of periodic composite plates considering fluid-structure coupling
    Zhang, R. Z.
    Cong, Y.
    Sellam, M.
    Chpoun, A.
    JOURNAL OF SOUND AND VIBRATION, 2024, 582
  • [26] Investigation on low velocity impact behavior of sandwich composite and monolithic laminate plates using FEM analysis
    Park, Hyunbum
    COMPOSITE STRUCTURES, 2019, 220 : 842 - 846
  • [27] Dynamic analysis of rockfall impact on a protective structure via FEM-DEM coupling
    Dong Su
    Runqi Zhang
    Hao Xiong
    Debo Zhao
    Natural Hazards, 2023, 119 : 1771 - 1797
  • [28] Dynamic analysis of rockfall impact on a protective structure via FEM-DEM coupling
    Su, Dong
    Zhang, Runqi
    Xiong, Hao
    Zhao, Debo
    NATURAL HAZARDS, 2023, 119 (03) : 1771 - 1797
  • [29] Microstructure and mechanical properties of highly biomimetic brick-and-mortar structure Ti6Al4V/Al3Ti metal-intermetallic laminate composite
    Jing, Dong
    Meng, Linggang
    Xu, Jinchen
    Ya, Bin
    Zhao, Junfei
    Zhou, Bingwen
    Zhang, Xingguo
    MATERIALS & DESIGN, 2023, 233
  • [30] Dynamic Response Study of Impulsive Force of Debris Flow Evaluation and Flexible Retaining Structure Based on SPH-DEM-FEM Coupling
    Li, Bailong
    Wang, Changming
    Li, Yanying
    Zhang, Shuhua
    ADVANCES IN CIVIL ENGINEERING, 2021, 2021