Characteristics of wake morphology during debris flow when passing a cylindrical obstacle

被引:5
|
作者
Cui, Wen-Rong [1 ,2 ]
Chen, Jian-Gang [1 ,2 ]
Zhao, Wan-Yu [1 ,2 ]
Chen, Xiao-Qing [1 ,2 ]
机构
[1] Chinese Acad Sci, Key Lab Mt Hazards & Earth Surface Proc, Inst Mt Hazards & Environm, Chengdu 610041, Peoples R China
[2] Univ Chinese Acad Sci, Beijing 100049, Peoples R China
基金
中国国家自然科学基金;
关键词
GRANULAR-MATERIALS; SEGREGATION;
D O I
10.1063/5.0171674
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Predicting wake morphology during debris flow when passing a cylindrical obstacle is vital for disaster assessment, early warning, evacuation planning, engineering design, and ecologic conservation. It can provide a scientific foundation for pertinent decision-making processes, diminishing the risks and impacts of debris flow disasters. This study extracts the morphological characteristics of debris flow cylindrical flow traces through the steady-state motion of debris flow observed in a flume during cyclical tests. It introduces a theoretical prediction formula and compares it to empirical data. The results indicated that the morphology of debris flow cylindrical flow traces can be described as a wall-jet-like bow wave (a bow wave formed by an upward wall jet on the obstacle upstream face). The primary upstream inflow is predominantly discharged through the wall and lateral jets. Formulas for three crucial parameters that determine the morphology of the traces are derived by combining the aerodynamics theory and extant literature. The predicted outcomes strongly align with the experimental data, underscoring their high predictive precision.
引用
收藏
页数:12
相关论文
共 22 条
  • [11] BUBBLE AND LIQUID FLOW CHARACTERISTICS IN A CYLINDRICAL BATH DURING SWIRL MOTION OF BUBBLING JET
    IGUCHI, M
    KONDOH, T
    UEMURA, T
    YAMAMOTO, F
    MORITA, Z
    EXPERIMENTS IN FLUIDS, 1994, 16 (3-4) : 255 - 262
  • [12] Links between morphology and geotechnical characteristics of large debris flow deposits in the Albatross area on the Scotian Slope (SE Canada)
    Mulder, T
    Berry, JA
    Piper, DJW
    MARINE GEORESOURCES & GEOTECHNOLOGY, 1997, 15 (03) : 253 - 281
  • [13] Links between morphology and geotechnical characteristics of large debris flow deposits in the Albatross area on the Scotian Slope (SE Canada)
    Dept Geologie + Oceanographie, Universite de Bordeaux I, CNRS URA 197, Avenue des Facultes, 33405 Talence cedex, France
    Mar Georesources Geotechnol, 3 (253-281):
  • [14] Relation between the occurrence of burnout and differential pressure fluctuation characteristics caused by the disturbance waves passing by a flow obstacle in a vertical boiling two-phase upward flow in a narrow annular channel
    Mori, S
    Fukano, T
    NUCLEAR ENGINEERING AND DESIGN, 2006, 236 (09) : 985 - 992
  • [15] Experimental investigation of near-wake characteristics of hydrodynamic cavitating flow around circular cylindrical pins of different geometries with and without ultrasonic transducers
    Kandula, Jagadeshwar
    Sri, Usha P.
    Reddy, Ravinder P.
    Gugulothu, S. K.
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 (01) : 1084 - 1103
  • [16] Nonlinear spatiotemporal characteristics of wind-rain flow around the trains passing through the tunnel entrance during rainstorms
    Li, Guo-Zhi
    Deng, E.
    Ni, Yi-Qing
    Ouyang, De-Hui
    Yang, Wei-Chao
    NONLINEAR DYNAMICS, 2024, 112 (16) : 13825 - 13843
  • [17] Relation between the occurrence of burnout and differential-pressure fluctuation characteristics caused by the disturbance waves passing by a flow obstacle in a vertical boiling two-phase upward flow in a narrow annular channel
    Mori, Shoji
    Fukano, Tohru
    2003, Japan Society of Mechanical Engineers (69):
  • [18] Morphology Development and Flow Characteristics during High Moisture Extrusion of a Plant-Based Meat Analogue
    Wittek, Patrick
    Ellwanger, Felix
    Karbstein, Heike P.
    Emin, M. Azad
    FOODS, 2021, 10 (08)
  • [19] Control of the monomer conversion and the polymer molecular-mass characteristics during the frontal polymerization of methyl methacrylate in a cylindrical flow reactor
    Davtyan, SP
    Tonoyan, AO
    Radugina, AA
    Davtyan, DS
    Abrosimov, AF
    Savchenko, VI
    VYSOKOMOLEKULYARNYE SOEDINENIYA SERIYA A & SERIYA B, 1999, 41 (02): : 242 - 248
  • [20] Materials Flow Behavior during Probeless Friction Stir Spot Welding and Its Correlation with Macroscopic Morphology and Grain Characteristics of Joints
    Ding W.
    Zhang Y.
    Lu T.
    Wang P.
    Chu Q.
    Li W.
    Zhang, Yong (hjzhyong@nwpu.edu.cn), 1600, Chinese Mechanical Engineering Society (56): : 59 - 65