Research on Droplet Size of Short-Circuiting Transfer in CO2 Gas-Shielded Arc Welding Based on High-Speed Photography

被引：0
|
作者：
Li, Ke [1 ]
Wei, Tongtong [1 ]
Song, Jinmin [1 ]
Chang, Hanwen [1 ]
Ji, Guangya [1 ]
机构：
[1] Taiyuan Univ Sci & Technol, Sch Mat Sci & Engn, Taiyuan 030024, Peoples R China
来源：
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS | 2024年 / 77卷 / 08期
关键词：
CO2 gas-shielded arc welding; Metal transfer; Short-circuiting transfer; Droplet size; High-speed photography; METAL TRANSFER; IMPINGEMENT; POOL;
D O I：
10.1007/s12666-024-03267-2
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In order to observe the metal transfer behavior in CO(2 )gas-shielded arc welding, an optical imaging system was established and video images of droplet were captured by a high-speed camera. Based on these images, the droplet size at the moment of short-circuit was accurately measured by ellipsoid-sphere conversion method, and the effects of welding parameters including welding current, welding voltage, wire extension and welding speed on droplet size were also analyzed. The results show that, the droplet size is inversely proportional to welding current and proportional to welding voltage. With the increase in the length of wire extension, the droplet size decreases first and increases later, within the allowable welding range, welding speed hardly affects the droplet size. Lastly, considering both welding efficiency and welding quality, the optimal welding parameters are determined.
引用
收藏
页码：2183 / 2189
页数：7
相关论文
共 37 条
  • [21] Random nature of droplet size and its origins in short circuit CO2 arc welding
    Zhu, Z
    Wu, W
    Chen, Q
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2005, 10 (06) : 636 - 642
  • [22] Current waveform control system of high-speed CO2 arc welding
    Department of Welding Engineering, Nanchang Institute of Aeronautical Technology, Nanchang 330063, China
    不详
    Hanjie Xuebao, 2007, 1 (41-45): : 41 - 45
  • [23] Spatter And Fume Reduction In Co2 Gas- Shielded Arc Welding By Regulated Globular Transfer
    Kei Yamazaki
    Reiichi Suzuki
    Hiroyuki Shimizu
    Fusaki Koshiishi
    Welding in the World, 2012, 56 : 12 - 19
  • [24] AN ELECTRODE EXTENSION MODEL FOR GAS METAL ARC-WELDING - SHORT-CIRCUITING TRANSFER CAN BE PREDICTED WITHIN 9-PERCENT FOR A GIVEN ELECTRODE FEED SPEED
    QUINN, TP
    MADIGAN, RB
    SIEWERT, TA
    WELDING JOURNAL, 1994, 73 (10) : S241 - S248
  • [25] High Speed CO2 Arc Welding Based on Constant Power Control
    Chen, Huanming
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-3, 2011, 314-316 : 1048 - 1051
  • [26] Effective control approach on molten droplet size in waveform controlled short circuit CO2 arc welding
    Zhu, Z. M.
    Wu, W. K.
    Chen, Q.
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2007, 12 (01) : 55 - 62
  • [27] Experimental investigation on arc characteristic and droplet transfer in CO2 laser-metal arc gas (MAG) hybrid welding
    Liu, Shuangyu
    Liu, Fengde
    Xu, Chunying
    Zhang, Hong
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 62 : 604 - 611
  • [28] Short-circuit Transition Control Technology for CO2 Gas Shielded Welding: Research Status and Prospect
    Chen T.
    Xue S.
    Sun Z.
    Zhai P.
    Chen W.
    Guo P.
    Cailiao Daobao/Materials Reports, 2019, 33 (05): : 1431 - 1442
  • [29] Detect and analysis of molten droplet in short-circuit arc welding based on high-speed charge coupled device camera
    Tsinghua University, Beijing 100084, China
    Hanjie Xuebao, 2006, 3 (29-33):
  • [30] Study on three-dimension synchrony high-speed photography of plasma during CO2 laser welding
    Liu, JH
    Zhang, FS
    Ma, LC
    Lei, DG
    LASERS IN MATERIAL PROCESSING AND MANUFACTURING II, 2005, 5629 : 149 - 154
1234