Microstructure and Strength of a Friction Stir Welded Low-Alloy Steel Processed by Tempforming

被引：0
|
作者：
Dolzhenko, A. S. [1 ]
Lugovskaya, A. S. [1 ]
Belyakov, A. N. [1 ]
Kaibyshev, R. O. [2 ]
机构：
[1] Belgorod Natl Res Univ, Belgorod, Russia
[2] Russian State Agr Univ, Moscow Timiryazev Agr Acad, Moscow, Russia
来源：
RUSSIAN PHYSICS JOURNAL | 2024年 / 66卷 / 11期
关键词：
low-alloy steel; tempforming; microstructure; friction-stir welding; mechanical properties;
D O I：
10.1007/s11182-023-03054-4
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
A feasibility of the friction stir welding for low-alloy structural steel processed by tempforming was analyzed. The stir zone was characterized by almost twofold increase in the hardness and the specific microstructure with an average grain size of 800 nm and large fractions of boundary misorientations around 60 degrees and below 5 degrees. The yield strength of the welded joint was 1220 MPa, whereas the yield strength of the base material was 1350 MPa. The fracture of the welded joint occurred in the heat affected zone between the stir zone and the base material.
引用
收藏
页码：1137 / 1144
页数：8
相关论文
共 50 条
  • [41] Microstructure characterization of Friction Stir Spot Welded TRIP steel
    Lomholt, Trine C.
    Adachi, Yoshitaka
    Peterson, Jeremy
    Steel, Russell
    Pantleon, Karen
    Somers, Marcel A.J.
    Advanced Materials Research, 2012, 409 : 275 - 280
  • [42] MICROSTRUCTURE AND MECHANICAL PROPERTIES OF FRICTION STIR WELDED ALUMINUM ALLOY/STAINLESS STEEL LAP JOINTS
    Ogura, Tomo
    Nishida, Taichi
    Nishida, Hidehito
    Yoshikawa, Syuhei
    Yoshida, Takumi
    Omichi, Noriko
    Fujimoto, Mitsuo
    Hirose, Akio
    PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON ALUMINUM ALLOYS (ICAA13), 2012, : 647 - 652
  • [43] Microstructure and tensile behavior of a friction stir processed magnesium alloy
    Mansoor, Bilal
    Ghosh, A. K.
    ACTA MATERIALIA, 2012, 60 (13-14) : 5079 - 5088
  • [44] Microstructure Control and Mechanical Properties of Multipass Friction Stir Processed High Strength Aluminum Alloy
    Matsuda, Yutaka
    Itoh, Goroh
    Motohashi, Yoshinobu
    SUPERPLASTICITY IN ADVANCED MATERIALS, 2013, 735 : 316 - 321
  • [45] Fatigue strength of friction stir welded aluminum alloy joints
    Qu, Hongqiu
    Tsujikawa, Masato
    Chung, Sung Wook
    Oki, Sachio
    Higashi, Kenji
    RECRYSTALLIZATION AND GRAIN GROWTH III, PTS 1 AND 2, 2007, 558-559 : 793 - +
  • [46] Microstructure and mechanical properties of friction stir processed hypoeutectoid steel
    Wang H.
    Wang W.
    Li X.
    Wang K.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2018, 39 (10): : 41 - 47
  • [47] Static and low-cycle strength of welded joints in a low-alloy steel on the mesoscale level
    Pleshanov, V.S.
    Saraev, Y.N.
    Lavrov, O.N.
    Dashchuk, Y.T.
    Kozlov, A.V.
    Welding Research Abroad, 2001, 47 (11): : 24 - 28
  • [48] Asymmetric distribution of microstructure and impact toughness in stir zone during friction stir processed a high strength pipeline steel
    Xie, G. M.
    Cui, H. B.
    Luo, Z. A.
    Misra, R. D. K.
    Wang, G. D.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 704 : 401 - 411
  • [49] Microstructure in low-carbon low-alloy high-strength pipe steel
    M. Yu. Matrosov
    I. V. Lyasotskii
    A. A. Kichkina
    D. L. D’yakonov
    A. A. Efimov
    Steel in Translation, 2012, 42 (1) : 84 - 93
  • [50] Impact Toughness of High-Strength Low-Alloy Steels Joined by Friction STIR Welding
    Dolzhenko, A. S.
    Lugovskaya, A. S.
    Malopheyev, S. S.
    Belyakov, A. N.
    RUSSIAN PHYSICS JOURNAL, 2024, 67 (09) : 1356 - 1363
12345