Microstructure and Strength of a Friction Stir Welded Low-Alloy Steel Processed by Tempforming

被引：0
|
作者：
Dolzhenko, A. S. [1 ]
Lugovskaya, A. S. [1 ]
Belyakov, A. N. [1 ]
Kaibyshev, R. O. [2 ]
机构：
[1] Belgorod Natl Res Univ, Belgorod, Russia
[2] Russian State Agr Univ, Moscow Timiryazev Agr Acad, Moscow, Russia
来源：
RUSSIAN PHYSICS JOURNAL | 2024年 / 66卷 / 11期
关键词：
low-alloy steel; tempforming; microstructure; friction-stir welding; mechanical properties;
D O I：
10.1007/s11182-023-03054-4
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
A feasibility of the friction stir welding for low-alloy structural steel processed by tempforming was analyzed. The stir zone was characterized by almost twofold increase in the hardness and the specific microstructure with an average grain size of 800 nm and large fractions of boundary misorientations around 60 degrees and below 5 degrees. The yield strength of the welded joint was 1220 MPa, whereas the yield strength of the base material was 1350 MPa. The fracture of the welded joint occurred in the heat affected zone between the stir zone and the base material.
引用
收藏
页码：1137 / 1144
页数：8
相关论文
共 50 条
  • [1] Microstructure and Strength of a Friction Stir Welded Low-Alloy Steel Processed by Tempforming
    A. S. Dolzhenko
    A. S. Lugovskaya
    A. N. Belyakov
    R. O. Kaibyshev
    Russian Physics Journal, 2024, 66 : 1137 - 1144
  • [2] Effect of Friction Stir Welding and Tempering on the Microstructure and Strength of a Tempformed Low-Alloy Steel
    Dolzhenko, Anastasiia S.
    Lugovskaya, Anna S.
    Malopheyev, Sergey
    Dudko, Valeriy
    Tikhonova, Marina
    Kaibyshev, Rustam
    Belyakov, Andrey
    METALS, 2024, 14 (01)
  • [3] Microstructure and Impact Toughness of High-Strength Low-Alloy Steel after Tempforming
    A. S. Dolzhenko
    P. D. Dolzhenko
    A. N. Belyakov
    R. O. Kaibyshev
    Physics of Metals and Metallography, 2021, 122 : 1014 - 1022
  • [4] Microstructure and Impact Toughness of High-Strength Low-Alloy Steel after Tempforming
    Dolzhenko, A. S.
    Dolzhenko, P. D.
    Belyakov, A. N.
    Kaibyshev, R. O.
    PHYSICS OF METALS AND METALLOGRAPHY, 2021, 122 (10): : 1014 - 1022
  • [5] Friction Stir Welding-Induced Microstructural Changes in Low-Alloy Steel Post-Tempforming
    Dolzhenko, Anastasiia
    Malopheyev, Sergey
    Lugovskaya, Anna
    Dudko, Valeriy
    Tikhonova, Marina
    Kaibyshev, Rustam
    Belyakov, Andrey
    STEEL RESEARCH INTERNATIONAL, 2024, 95 (05)
  • [6] Tempforming Strengthening of a Low-Alloy Steel
    Dolzhenko, Anastasiia
    Kaibyshev, Rustam
    Belyakov, Andrey
    MATERIALS, 2022, 15 (15)
  • [7] Microstructure and Corrosion Properties of Friction Stir-Welded High-Strength Low -Alloy Steel
    Amir Behjat
    Morteza Shamanian
    Masoud Atapour
    Mohammad Ahl Sarmadi
    Transactions of the Indian Institute of Metals, 2021, 74 : 1763 - 1774
  • [8] Microstructure and Corrosion Properties of Friction Stir-Welded High-Strength Low -Alloy Steel
    Behjat, Amir
    Shamanian, Morteza
    Atapour, Masoud
    Sarmadi, Mohammad Ahl
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (07) : 1763 - 1774
  • [9] Microstructure and mechanical characterization of friction stir welded high strength low alloy steels
    Ramesh, R.
    Dinaharan, I.
    Kumar, Ravi
    Akinlabi, E. T.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 687 : 39 - 46
  • [10] Effect of Tempforming on Strength and Toughness of Medium-Carbon Low-Alloy Steel
    Yuzbekova, Diana
    Dudko, Valeriy
    Pydrin, Alexander
    Gaidar, Sergey
    Mironov, Sergey
    Kaibyshev, Rustam
    MATERIALS, 2023, 16 (03)
12345