Synthesis and Characterizations of Ni-W Alloy

被引:0
|
作者
Potdar, Dipali [1 ,2 ]
Patil, Sushant [2 ]
Kulkarni, Yugen [1 ,3 ]
Pawar, Niketa [1 ,3 ]
Sadale, Shivaji [2 ]
Chikode, Prashant [1 ]
机构
[1] Jaysingpur Coll, Dept Phys, Jaysingpur 416101, India
[2] Shivaji Univ, Dept Technol, Kolhapur 416004, India
[3] Willingdon Coll, Dept Phys, Sangli 416415, India
关键词
Ni-W; Alloy; Electrodeposition; Amorphous; Raman Spectroscopy; NICKEL-TUNGSTEN ALLOYS; MECHANICAL-PROPERTIES; ELECTRODEPOSITION; RESISTANCE; BEHAVIOR; FILMS;
D O I
10.22068/ijmse.3535
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The Nickel tungsten (Ni-W) alloy was electrodeposited on stainless steel (SS) substrate using potentiostatic mode at room temperature. Potentiostatic electrodeposition was carried out by varying the deposition time. The physicochemical properties of Ni-W alloys were studied using X -Ray diffraction (XRD), Electron Microscopy and micro -Raman spectroscopy. Recorded XRD spectra was compared with standard JCPDS card and the presence of Ni was confirmed, no such peaks for W were observed. Further study was extended for micro -Raman analysis. From Raman spectroscopy study the appearance of Ni-O and W6+=O bonds confirms that the Ni-W present in amorphous phase. Several cracks were observed in SEM images along with nanoparticles distributed over the electrode surface. The appearance of cracks may be correlated with the in -plane tensile stresses, lattice strains and stacking faults and maybe related to the substrate confinements.
引用
收藏
页码:1 / 6
页数:6
相关论文
共 50 条
  • [41] MICROSTRUCTURE AND CRYSTALLOGRAPHY OF UNIDIRECTIONALLY SOLIDIFIED Ni-W EUTECTIC ALLOY.
    Dirnfeld, S.F.
    Shechtman, D.
    1985, (16 A):
  • [42] Corrosion Resistance of Heat-Treated Ni-W Alloy Coatings
    Popczyk, Magdalena
    Kubisztal, Julian
    Swinarew, Andrzej Szymon
    Waskiewicz, Zbigniew
    Stanula, Arkadiusz
    Knechtle, Beat
    MATERIALS, 2020, 13 (05)
  • [43] Interfacial phenomena between liquid alloy and Ni substrate covered by Ni-W layer
    Dobosz, Alexandra
    Berent, Katarzyna
    Bigos, Agnieszka
    Gancarz, Tomasz
    MATERIALS LETTERS, 2020, 277
  • [44] The effect of tungsten content on nanocrystalline structure of Ni-W alloy electrodeposits
    Hwang, WS
    Cho, WS
    ECO-MATERIALS PROCESSING & DESIGN VII, 2006, 510-511 : 1062 - 1065
  • [45] High Strength and High Ductility in Electrodeposited Nanocrystalline Ni-W Alloy
    Fujita, Kazutaka
    Suidu, Taiji
    Yamasaki, Tohru
    PRICM 7, PTS 1-3, 2010, 654-656 : 1118 - +
  • [46] Morphology and microhardness of Ni-W alloy nanocrystalline coatings prepared by electrodeposition
    Wu, Yucheng
    Shu, Xia
    Li, Yun
    Wang, Wenfang
    Huang, Xinmin
    Li, Guanghai
    Zhang, Lide
    Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 2007, 43 (12): : 69 - 73
  • [47] Micro imprinting for al alloy using Ni-W electroformed mold
    Kanagawa Industrial Technology Center, 705-1, Shimoimaizumi, Ebina
    Kanagawa
    243-0435, Japan
    不详
    Ibaraki
    305-8568, Japan
    不详
    Kanagawa
    252-0811, Japan
    Int. J. Autom. Technol., 6 (674-677):
  • [48] Tensile deformation and microstructure of a nanocrystalline Ni-W alloy produced by electrodeposition
    Iwasaki, H
    Higashi, K
    Nieh, TG
    SCRIPTA MATERIALIA, 2004, 50 (03) : 395 - 399
  • [49] Deposition technology and microhardness of electrochemical deposited Ni-W alloy nanocrystalline
    Wu, YC
    Shu, X
    Wang, LP
    Hu, XY
    Wang, WF
    Huang, XM
    14TH CONGRESS OF INTERNATIONAL FEDERATION FOR HEAT TREATMENT AND SURFACE ENGINEERING, VOLS 1 and 2, PROCEEDINGS, 2004, : 1279 - 1282
  • [50] Structural Features of Ni-W Alloy Deposited from Pyrophosphate Electrolyte
    Krasikov, A. V.
    Krasikov, V. L.
    Markov, M. A.
    RUSSIAN JOURNAL OF APPLIED CHEMISTRY, 2020, 93 (11) : 1688 - 1695