A Numerical Study on the Cement Slurry Penetration Performance of the Cyclic Grouting Method with High-Frequency Pulsating Pressure

被引:3
|
作者
Li, Yongfeng [1 ,2 ]
Chen, Xiaobin [3 ]
Li, Jianzhong [1 ]
Tang, Lubo [3 ]
Lin, Fantong [4 ]
Zhang, Xinxin [1 ]
机构
[1] Cent South Univ, Sch Geosci & Infophys, Changsha 410083, Peoples R China
[2] Powder China Zhongnan Engn Co Ltd, Changsha 410014, Peoples R China
[3] Cent South Univ, Sch Civil Engn, Changsha 410083, Peoples R China
[4] PLA, AMS, Inst Def Engn, Beijing 100850, Peoples R China
来源
APPLIED SCIENCES-BASEL | 2023年 / 13卷 / 21期
基金
中国国家自然科学基金;
关键词
cement slurry; penetration behavior; pulsating pressure; high-frequency grouting;
D O I
10.3390/app132111919
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
The performance of traditional steady grouting is sometimes limited; therefore, a new high-frequency pulsed grouting method is proposed. Through the CFD method, this paper studies the cement slurry penetration performance of cyclic grouting under the influence of pulsating pressure and steady pressure. Firstly, the penetration shape and flow fields of the two grouting methods are investigated. Secondly, the effects of pulsation parameters on penetration performance are studied. Finally, the influence of various working conditions, such as soil properties, grout parameters, grouting pipe length, and back pressure, on penetration distance is also investigated. The results show that pulsating grouting achieves better penetration performance compared with steady pressure grouting. With the increase in frequency, pulsating grouting exhibits superior performance, while with the increase in pulsation amplitude, the penetration distance initially increases and then decreases. This is because part of the pulsating pressure is lower than the back pressure, which weakens the pulsating effect. As viscosity and back pressure increase and as porosity and particle size decrease, the proportion of lateral diffusion in pulsating grouting relative to steady pressure grouting increases. This indicates that lateral penetration performance achieves optimal results under high-flow-resistance conditions. However, when the flow resistance becomes excessively high, the vertical penetration distance may be affected. This study is expected to improve the grouting efficiency and provide a better understanding of pulsating grouting design and operation.
引用
收藏
页数:16
相关论文
共 50 条
  • [21] Experimental Study on Shear Strength of Sand under High-frequency Cyclic Loading
    Shan Y.
    Chen P.
    Zhou S.
    Ye W.
    Dai N.
    Tiedao Xuebao/Journal of the China Railway Society, 2023, 45 (08): : 147 - 155
  • [22] Vibration analysis and dynamic performance improvement of high-frequency injection method
    Peng, Wei
    Qiao, Mingzhong
    Jiang, Chao
    Lu, Xihao
    Zhu, Peng
    JOURNAL OF POWER ELECTRONICS, 2021, 21 (02) : 364 - 375
  • [23] Vibration analysis and dynamic performance improvement of high-frequency injection method
    Wei Peng
    Mingzhong Qiao
    Chao Jiang
    Xihao Lu
    Peng Zhu
    Journal of Power Electronics, 2021, 21 : 364 - 375
  • [24] Study on the Calculation Method of the Diffusion Range of Grouting Slurry for a High-speed Railway Ballastless Track Subgrade
    Yang, Changwei
    Guo, Jinhao
    Wei, Shaowei
    Zhang, Liang
    Li, Sifeng
    Liu, Yang
    ADVANCES IN CIVIL ENGINEERING, 2021, 2021
  • [25] EXPERIMENTAL-STUDY OF HIGH-FREQUENCY DISCHARGE OF LOW-PRESSURE
    GODYAK, BA
    POPOV, OA
    VESTNIK MOSKOVSKOGO UNIVERSITETA SERIYA 3 FIZIKA ASTRONOMIYA, 1976, 17 (06): : 746 - 748
  • [26] SPECTROSCOPIC STUDY OF MIDDLE PRESSURE HIGH-FREQUENCY DISCHARGE PLASMA PARAMETERS
    KUZOVNICOV, AA
    MALYAROV, AV
    SAVINOV, VP
    YAKUNIN, VG
    VESTNIK MOSKOVSKOGO UNIVERSITETA SERIYA 3 FIZIKA ASTRONOMIYA, 1983, 24 (03): : 79 - 80
  • [27] A Method for Determining Optimal Mean Airway Pressure in High-Frequency Oscillatory Ventilation
    Casserly, Brian
    McCool, F. Dennis
    Sethi, Jigme M.
    Kawar, Eyad
    Read, Richard
    Levy, Mitchell M.
    LUNG, 2013, 191 (01) : 69 - 76
  • [28] A Method for Determining Optimal Mean Airway Pressure in High-Frequency Oscillatory Ventilation
    Brian Casserly
    F. Dennis McCool
    Jigme M. Sethi
    Eyad Kawar
    Richard Read
    Mitchell M. Levy
    Lung, 2013, 191 : 69 - 76
  • [29] Analysis and Quantification Method of Effective Rotor Anisotropic Components for SPMSM Under Pulsating High-Frequency Signal Injection
    Jin, Zhen
    Xu, Wei
    Wang, Jiyao
    Wang, Henghong
    Xu, Tao
    IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION, 2025, 11 (01): : 326 - 336
  • [30] Numerical Simulation of Rock Vibration Response under Ultrasonic High-Frequency Vibration with High Confining Pressure
    Wang, Minsheng
    Xuan, Lingchao
    Liu, Weikai
    Feng, Jinyu
    Wang, Heng
    PROCESSES, 2024, 12 (07)