Influence of Al on microstructural evolution and mechanical behaviour of Nb-9Ti-8C alloys

被引：1

作者：

Wei, Wenqing ^{[1
,2
]}

Yang, Jinghong ^{[1
]}

Ye, Chaochao ^{[1
]}

Zhang, Shuzhi ^{[1
]}

Zhang, Hao ^{[3
]}

机构：

[1] Weifang Univ, Sch Mech & Automat, Weifang, Peoples R China

[2] Tianjin Univ, Sch Mech Engn, Tianjin, Peoples R China

[3] Chinese Acad Sci, Ningbo Inst Mat Technol & Engn, Ningbo, Peoples R China

来源：

MATERIALS SCIENCE AND TECHNOLOGY | 2023年 / 39卷 / 07期

关键词：

Nb-Ti-Al-C alloy; microstructure; heat treatment; mechanical properties; phase precipitation; NB; ZR; ADDITIONS; HF;

D O I：

10.1080/02670836.2022.2141872

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Nb-9Ti-8C-xAl (at.-%) alloys with Al content of 0, 5%, 10% and 15% were prepared using the vacuum arc-melting method, and microstructural evolution and mechanical behaviour were investigated. Nb-9Ti-8C-(0, 5)Al alloys are composed of body-centred cubic (bcc) Nb solid solution (Nbss), face-centred cubic (fcc) (Nb, Ti)C and close-packed hexagonal Nb2C phases. As Al content increases, besides Nbss and (Nb, Ti)C, Nb3Al phase precipitates. After heat treatment at 1100 degrees C for 24 h, Nb2C phase disappears gradually and massive Nb3Al phase precipitates. Nbss and internal Nb3Al phase exhibit lamellar structure. Al addition favours the enhancement of compressive strength (sigma(0.2) and sigma(max)), Nb3Al precipitation can significantly improve the strength of Nb-9Ti-8C alloy, but reduce its toughness. With test temperature increases, the strength decreases obviously.

引用

页码：777 / 784

页数：8

共 50 条

[21] MICROSTRUCTURAL EVOLUTION OF TI-10NB AND TI-15NB ALLOYS PRODUCED BY THE BLENDED ELEMENTAL TECHNIQUE
Martins, G., V
Silva, C. R. M.
Nunes, C. A.
Henriques, V. A. R.
Borges Junior, L. A.
Machado, J. P. B.
ADVANCED POWDER TECHNOLOGY VII, 2010, 660-661 : 152 - 157
[22] Creep behaviour and related high temperature microstructural stability of Ti-46Al-9Nb sheet material
Bystrzanowski, S
Bartels, A
Clemens, H
Gerling, R
Schimansky, FP
Dehm, G
Kestler, H
INTERMETALLICS, 2005, 13 (05) : 515 - 524
[23] MICROSTRUCTURAL CHARACTERIZATION OF NI-Cr-Al-C-(Nb) ALLOYS
Cios, Grzegorz
Stepien, Milena
Wieczerzak, Krzyszof
METAL 2015: 24TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2015, : 1335 - 1339
[24] Microstructures and mechanical properties of Nb-Ti-C alloys
Jiao, Huisheng
Jones, Ian P.
Aindow, Mark
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 485 (1-2): : 359 - 366
[25] Effect of Ti or Fe Addition and Annealing on Microstructural Evolution and Mechanical Properties of Hypereutectic Nb-Si-Mo Alloys
Kasturi Sala
Swapnil Morankar
Rahul Mitra
Metallurgical and Materials Transactions A, 2021, 52 : 1185 - 1211
[26] Effect of Ti or Fe Addition and Annealing on Microstructural Evolution and Mechanical Properties of Hypereutectic Nb-Si-Mo Alloys
Sala, Kasturi
Morankar, Swapnil
Mitra, Rahul
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2021, 52 (04): : 1185 - 1211
[27] Microstructural Evolution and Mechanical Properties of Nb-Ti Microalloyed Pipeline Steel
LAN Liang-yun
JournalofIronandSteelResearch(International), 2011, 18 (02) : 57 - 63
[28] Microstructural Evolution and Mechanical Properties of Nb-Ti Microalloyed Pipeline Steel
Lan, Liang-yun
Qiu Chun-lin
Zhao De-wen
Gao Xiu-hua
JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2011, 18 (02) : 57 - 63
[29] Microstructural Evolution and Mechanical Properties of Nb-Ti Microalloyed Pipeline Steel
Liang-yun Lan
Chun-lin Qiu
De-wen Zhao
Xiu-hua Gao
Journal of Iron and Steel Research International, 2011, 18 : 57 - 63
[30] Mechanical and corrosion behaviour of Al-Fe-Nb amorphous alloys
Audebert, F
Vazquez, S
Gutierrez, A
Vergara, I
Alvarez, G
Escorial, AG
Sirkin, H
MECHANICALLY ALLOYED, METASTABLE AND NANOCRYSTALLINE MATERIALS, PART 2, 1998, 269-2 : 837 - 842

← 1 2 3 4 5 →