Study on microstructure, mechanical and wear resistance properties of arc sprayed Al-Mg alloy coating

被引：1

作者：

Duc, Thanh Le ^{[1
]}

Thi, Ha Pham ^{[2
,4
]}

Van, Tuan Nguyen ^{[2
]}

Thu, Quy Le ^{[3
]}

Thi, Ly Pham ^{[2
]}

Nguyen, Tuan Anh ^{[2
]}

Quoc, Cuong Ly ^{[2
]}

Bich, Thuy Dao ^{[2
]}

机构：

[1] Le Quy Don Tech Univ, Fac Mech Engn, 236 Hoang Quoc Viet, Hanoi 10000, Vietnam

[2] Vietnam Acad Sci & Technol VAST, Inst Trop Technol, 18 Hoang Quoc Viet, Hanoi 100000, Vietnam

[3] Natl Key Lab Welding & Surface Treatment Technol, 4 Pham Van Dong, Hanoi 10000, Vietnam

[4] Vietnam Acad Sci & Technol, Inst Trop Technol, Lab Data Trop Tests & Environm, 18 Hoang Quoc Viet, Hanoi 10000, Vietnam

来源：

VIETNAM JOURNAL OF CHEMISTRY | 2023年 / 61卷 / S3期

关键词：

Al-Mg coating; Al-Mg alloy; arc sprayed Al-Mg coating; electric arc spraying; wear resistance; CORROSION-FATIGUE; MOLTEN ALUMINUM; SEAWATER; BEHAVIOR;

D O I：

10.1002/vjch.202300084

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

In this investigation, Al-Mg alloy coating samples were deposited by the electric arc spray technique on SS400 steel substrate at various spraying parameters, namely, the spray current (150, 200 and 300 A), the air pressure (4, 4.5 and 5.5 bar) and the stand-off distance (100, 162.8 and 200 mm). The structure morphology, phase composition, porosity, microhardness, adhesion and wear resistance of the coating were studied. The obtained results showed that the coating at the spray current of 300 A, the air pressure of 5.5 bar and the stand-off distance of 162.8 mm has the lowest porosity and highest microhardness. In addition, this coating also has better adhesion to the steel substrate and wear resistance than other coatings. Moreover, X-ray phase analysis showed that the following phases are created on the surface of the Al-Mg coatings: Al, Al2MgO4 and Al3Mg2.

引用

页码：77 / 83

页数：7

共 50 条

[31] Effect of Cooling Rate on Microstructure and Mechanical Properties of AA5056 Al-Mg Alloy
Zare, M. Asl
Taghiabadi, R.
Ghoncheh, M. H.
INTERNATIONAL JOURNAL OF METALCASTING, 2022, 16 (03) : 1533 - 1543
[32] Effect of Cooling Rate on Microstructure and Mechanical Properties of AA5056 Al-Mg Alloy
M. Asl Zare
R. Taghiabadi
M. H. Ghoncheh
International Journal of Metalcasting, 2022, 16 : 1533 - 1543
[33] Research on friction and wear properties of annealed 5052 Al-Mg alloy
Wang, Wenxia
Liu, Ping
Gan, Liantao
MATERIALS SCIENCE AND ENGINEERING APPLICATIONS, PTS 1-3, 2011, 160-162 : 157 - 162
[34] Optical and mechanical properties of an Al-Mg alloy processed by ECAE
Huarte, B
Luis, CJ
Puertas, I
León, J
Luri, R
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 162 : 317 - 326
[35] Effects of Yb on the mechanical properties and microstructures of an Al-Mg alloy
Song, Min
Wu, Zhenggang
He, Yuehui
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 497 (1-2): : 519 - 523
[36] MECHANICAL PROPERTIES OF HIGH STRENGTH Al-Mg ALLOY SHEET
Choi, Bong-Jae
Hong, Kyung-Eui
Kim, Young-Jig
INTERNATIONAL JOURNAL OF MODERN PHYSICS B, 2009, 23 (6-7): : 843 - 848
[37] Characterization of mechanical properties and formability of a superplastic Al-Mg alloy
Majidi, Omid
Jahazi, Mohammad
Bombardier, Nicolas
NUMISHEET 2018: 11TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES, 2018, 1063
[38] Microstructure and properties of arc sprayed nanocrystalline coating
Fu, Bin-You
He, Ding-Yong
Jiang, Jian-Min
Li, Xiao-Yan
Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2010, 31 (01): : 142 - 145
[39] THE INFLUENCE OF MICROSTRUCTURE OF ARC SPRAYED COATINGS ON WEAR RESISTANCE
Majewski, Daniel
Hejwowski, Tadeusz
Lukasik, Daniel
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2018, 12 (01): : 285 - 292
[40] Mechanical properties and corrosion resistance of arc coating sprayed by cored wires
Hvozdetskyi, V. M.
Student, M. M.
Pokhrelyuk, I. M.
Student, O. Z.
Zadorozhna, Kh. R.
MATERIALS SCIENCE, 2024, 60 (01) : 79 - 84

← 1 2 3 4 5 →