Determination of the Fouling Degree of the Heat Substation Based on Tests of Plate Heat Exchangers

被引：0
|
作者：
Romanowicz, Tomasz [1 ]
Jaremkiewicz, Magdalena [2 ]
Kania, Agata [1 ]
Pietruszka, Michal [2 ]
机构：
[1] Cracow Univ Technol, Dept Energy, Krakow, Poland
[2] Cracow Univ Technol, Dept Thermal Proc Air Protect & Waste Utilizat, Krakow, Poland
来源：
HEAT TRANSFER ENGINEERING | 2023年 / 44卷 / 11-12期
关键词：
THERMAL-RESISTANCE;
D O I：
10.1080/01457632.2022.2113458
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The subject of the following considerations is research on plate heat exchangers. The research concerns the determination of the degree of fouling of plate heat exchangers with mineral deposits in the water. The method proposed in this publication for determining the thermal resistance of fouling is based on the determination of the overall heat transfer coefficient for a clean heat exchanger (operating under laboratory conditions) and a fouled one (operating in a heat substation). With the overall heat transfer coefficients determined, the difference in thermal resistance for the fouled and clean heat exchanger and thus the total thermal resistance of the fouling can be determined. The calculation algorithm presented in the work will allow the creation of software that enables monitoring, thus optimizing work heating centers.
引用
收藏
页码：1015 / 1024
页数：10
相关论文
共 50 条
  • [31] An experimental and numerical investigation of heat transfer fouling and fluid flow in flat plate heat exchangers
    Kho, T
    Müller-Steinhagen, H
    CHEMICAL ENGINEERING RESEARCH & DESIGN, 1999, 77 (A2): : 124 - 130
  • [32] Dynamic modelling and simulation of plate heat exchangers under milk fouling
    Georgiadis, MC
    Macchietto, S
    CHEMICAL ENGINEERING SCIENCE, 2000, 55 (09) : 1605 - 1619
  • [33] Comparison of crystallization fouling in plate and double-pipe heat exchangers
    Bansal, B
    Müller-Steinhagen, H
    Chen, XD
    HEAT TRANSFER ENGINEERING, 2001, 22 (05) : 13 - 25
  • [34] Effect of geometry and flow conditions on particulate fouling in plate heat exchangers
    Thonon, B
    Grandgeorge, S
    Jallut, C
    HEAT TRANSFER ENGINEERING, 1999, 20 (03) : 12 - 24
  • [35] Coatings to Reduce Fouling in Plate Heat Exchangers: Two Case Studies
    Santos, Olga
    Smets, Nico
    Wictor, Clemens
    Nilsson, Magnus
    HEAT TRANSFER ENGINEERING, 2024, 45 (15) : 1304 - 1321
  • [36] Accounting for the thermal resistance of cooling water fouling in plate heat exchangers
    Arsenyeva, Olga P.
    Crittenden, Barry
    Yang, Mangyan
    Kapustenko, Petro O.
    APPLIED THERMAL ENGINEERING, 2013, 61 (01) : 53 - 59
  • [37] Experimental study of fouling in plate heat exchangers in district heating systems
    Jaglarz, Gabriela
    Taler, Dawid
    JOURNAL OF POWER TECHNOLOGIES, 2015, 95 (05): : 42 - 46
  • [38] Accounting for Thermal Resistance of Cooling Water Fouling in Plate Heat Exchangers
    Arsenyeva, Olga P.
    Tovazhnyansky, Leonid L.
    Kapustenko, Petro O.
    Demirskyy, Oleksiy V.
    PRES 2012: 15TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELLING AND OPTIMISATION FOR ENERGY SAVING AND POLLUTION REDUCTION, 2012, 29 : 1327 - 1332
  • [39] A model for fouling of plate-and-frame heat exchangers in food industry
    Boloorchi, A. S.
    Nasr, M. R. Jafari
    ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING, 2012, 7 (03) : 427 - 433
  • [40] A probabilistic fouling and cost model for plate-and-frame heat exchangers
    Zubair, SM
    Qureshi, BA
    INTERNATIONAL JOURNAL OF ENERGY RESEARCH, 2006, 30 (01) : 1 - 17
12345