A novel method for improving the microstructure and the properties of Al-Si-Cu alloys prepared using rapid solidification/powder metallurgy

被引：14

作者：

Zhao, Xingming ^{[1
]}

Meng, Jingran ^{[1
]}

Zhang, Chi ^{[1
]}

Wei, Wei ^{[1
]}

Wu, Fufa ^{[1
]}

Zhang, Guangan ^{[1
]}

机构：

[1] Liaoning Univ Technol, Sch Mat Sci & Engn, Mat Proc Engn, Jinzhou 121001, Peoples R China

来源：

MATERIALS TODAY COMMUNICATIONS | 2023年 / 35卷

关键词：

Rapid solidification; powder metallurgy; Al; -Si; -Cu; Extrusion; Crushed oxide film; Mechanical properties; ALUMINUM-ALLOYS; TENSILE PROPERTIES; BEHAVIOR; COMPOSITES; PARAMETERS; MECHANISM;

D O I：

10.1016/j.mtcomm.2023.105802

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A novel method based on the combination of rapid solidification/powder metallurgy with hot extrusion was proposed in the present study for improving the microstructure and properties of Al-Si-Cu alloys. The phase composition, microstructure, and mechanical properties of the extruded Al-Si-Cu alloy were systematically investigated. The experimental results revealed that the extruded Al-Si-Cu alloy comprised five kinds of phases, namely, the & alpha;-Al, fi-Si, Al2O3, CuAl2, and Cu4Si phases. The extrusion process significantly reduced the porosity while improving the density of the Al-Si-Cu alloy. The tensile strength and elongation values of the extruded alloy were much larger than those of the unextruded alloy. The use of the proposed method improved the mechanical properties of the Al-Si-Cu alloy greatly compared to when using the traditional casting method.

引用

页数：9

共 50 条

[41] Assessment of the Effect of Mg Addition on the Solidification Behavior, Tensile and Impact Properties of Al-Si-Cu Cast Alloys
Mohamed, A. M. A.
Ibrahim, M. F.
Samuel, E.
Samuel, A. M.
Samuel, F. H.
Doty, H. W.
INTERNATIONAL JOURNAL OF METALCASTING, 2023, 17 (01) : 82 - 108
[42] Structure and Properties of Nb-Al Alloys Prepared by Powder Metallurgy
Karpov, M. I.
Korzhov, V. P.
Prokhorov, D. V.
Vnukov, V. I.
Kiiko, V. M.
Tolstun, A. N.
Kolobov, Yu. R.
Golosov, E. V.
RUSSIAN METALLURGY, 2013, 2013 (04): : 251 - 255
[43] Microstructure and properties of Mo-Cu alloys produced by powder metallurgy
Wang, T. G.
Liang, Q. C.
Qin, Q.
MATERIALS RESEARCH INNOVATIONS, 2015, 19 : 1150 - 1152
[44] Effect of Grain Refinement and Cooling Rate on the Microstructure and Mechanical Properties of Secondary Al-Si-Cu Alloys
Giulio Timelli
Giordano Camicia
Stefano Ferraro
Journal of Materials Engineering and Performance, 2014, 23 : 611 - 621
[45] Effect of Grain Refinement and Cooling Rate on the Microstructure and Mechanical Properties of Secondary Al-Si-Cu Alloys
Timelli, Giulio
Camicia, Giordano
Ferraro, Stefano
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2014, 23 (02) : 611 - 621
[46] Effect of Mg level on the microstructure and mechanical properties of die-cast Al-Si-Cu alloys
Yang, Hailin
Ji, Shouxun
Yang, Wenchao
Wang, Yun
Fan, Zhongyun
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 642 : 340 - 350
[47] The electrochemical properties of melt-spun Al-Si-Cu alloys
Zhang, Linping
Wang, Fei
Liang, Pu
Song, Xianlei
Hu, Qing
Sun, Zhanbo
Song, Xiaoping
Yang, Sen
Wang, Liqun
MATERIALS CHEMISTRY AND PHYSICS, 2011, 129 (03) : 1006 - 1010
[48] Investigation of thermal and mechanical properties of Cu-Al alloys with silver addition prepared by powder metallurgy
Gohar, Ghulam Abbas
Manzoor, Tareq
Shah, Asad Naeem
JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 735 : 802 - 812
[49] Effect of microalloying on the structure and properties of alloys in the Al-Si-Cu system
Silaeva, VI
Prusakov, BA
Éskin, GI
METAL SCIENCE AND HEAT TREATMENT, 2000, 42 (5-6) : 241 - 245
[50] Microstructure and Mechanical Properties of Al-Si Alloys Produced by Rapid Solidification and Hot Extrusion
Noga, Piotr
Skrzekut, Tomasz
Wedrychowicz, Maciej
MATERIALS, 2023, 16 (15)

← 1 2 3 4 5 →