Direct bonding of stainless steel and PEEK using non-thermal atmospheric pressure plasma-assisted joining technology

被引：2

作者：

Takenaka, Kosuke ^{[1
]}

Jinda, Akiya ^{[1
]}

Nakamoto, Soutaro ^{[1
]}

Toko, Susumu ^{[1
]}

Uchida, Giichiro ^{[2
]}

Setsuhara, Yuichi ^{[1
]}

机构：

[1] Osaka Univ, Joining & Welding Res Inst, Osaka 5670047, Japan

[2] Meijo Univ, Fac Sci & Technol, 1-501 Shiogamaguchi,Tempaku Ku, Nagoya, Aichi 4688502, Japan

来源：

JOURNAL OF MANUFACTURING PROCESSES | 2023年 / 105卷

关键词：

Direct joint; Atmospheric pressure plasma; Dissimilar materials joining; PEEK; POLYETHERETHERKETONE PEEK; METAL;

D O I：

10.1016/j.jmapro.2023.09.049

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This work demonstrates the direct bonding of stainless steel (SUS304) to poly(ether ether ketone) (PEEK) using non-thermal atmospheric pressure plasma-assisted joining technology in association with thermal press fitting. The tensile shear stress values of specimens bonded after plasma treatment of both the SUS304 and PEEK surfaces were higher than those of untreated samples and samples for which only one of the two surfaces was exposed to the plasma. These results indicate that the surface physical and chemical changes induced by exposure to the radio frequency plasma jet significantly increased the bonding strength.

引用

页码：276 / 281

页数：6

共 50 条

[31] Non-thermal plasma-assisted capture and conversion of CO2
Li, Sirui
Ongis, Michele
Manzolini, Giampaolo
Gallucci, Fausto
Chemical Engineering Journal, 2021, 410
[32] Maskless etching using atmospheric pressure non-thermal surface discharge plasma
Department of Materials and Informatics, Interdisciplinary Graduate School of Agriculture and Engineering, University of Miyazaki, 1-1, GakuenKibanadai-Nishi, Miyazaki 889-2192, Japan
不详
IEEJ Trans. Fundam. Mater., 1600, 10 (907-912):
[33] State of the art in medical applications using non-thermal atmospheric pressure plasma
Tanaka H.
Ishikawa K.
Mizuno M.
Toyokuni S.
Kajiyama H.
Kikkawa F.
Metelmann H.-R.
Hori M.
Reviews of Modern Plasma Physics, 1 (1)
[34] Liquid assisted plasma enhanced chemical vapour deposition with a non-thermal plasma jet at atmospheric pressure
Schaefer, Jan
Fricke, Katja
Mika, Filip
Pokorna, Zuzana
Zajickova, Lenka
Foest, Ruediger
THIN SOLID FILMS, 2017, 630 : 71 - 78
[35] Optimization of Non-thermal Plasma-Assisted Catalytic Oxidation for Methane Emissions Abatement as an Exhaust Aftertreatment Technology
Rahman Gholami
Cristina Stere
Sarayute Chansai
Amit Singhania
Alexandre Goguet
Peter Hinde
Paul Millington
Christopher Hardacre
Plasma Chemistry and Plasma Processing, 2022, 42 : 709 - 730
[36] Optimization of Non-thermal Plasma-Assisted Catalytic Oxidation for Methane Emissions Abatement as an Exhaust Aftertreatment Technology
Gholami, Rahman
Stere, Cristina
Chansai, Sarayute
Singhania, Amit
Goguet, Alexandre
Hinde, Peter
Millington, Paul
Hardacre, Christopher
PLASMA CHEMISTRY AND PLASMA PROCESSING, 2022, 42 (04) : 709 - 730
[37] Non-thermal Fresh Food Sanitation By Atmospheric Pressure Plasma
Morrow, Robert
Surdyk, Robert
Remiker, Ross
HORTSCIENCE, 2016, 51 (09) : S122 - S122
[38] Modeling of a Non-Thermal RF Plasma Jet at Atmospheric Pressure
Sigeneger, Florian
Schaefer, Jan
Weltmann, Klaus-Dieter
Foest, Ruediger
Loffhagen, Detlef
PLASMA PROCESSES AND POLYMERS, 2017, 14 (4-5)
[39] Etching of uranium oxide with a non-thermal, atmospheric pressure plasma
Yang, X
Moravej, M
Babayan, SE
Nowling, GR
Hicks, RF
JOURNAL OF NUCLEAR MATERIALS, 2004, 324 (2-3) : 134 - 139
[40] NON-THERMAL PLASMA AT ATMOSPHERIC PRESSURE AND ITS OPPORTUNITIES FOR APPLICATIONS
Akishev, Yu. S.
IZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENII KHIMIYA I KHIMICHESKAYA TEKHNOLOGIYA, 2019, 62 (08): : 26 - 60

← 1 2 3 4 5 →