Research on the Characteristic Spectral Band Determination for Water Quality Parameters Retrieval Based on Satellite Hyperspectral Data

Hyperspectral remote sensing technology has been widely used in water quality monitoring. However, while it provides more detailed spectral information for water quality monitoring, it also gives rise to issues such as data redundancy, complex data processing, and low spatial resolution. In this study, a novel approach was proposed to determine the characteristic spectral band of water quality parameters based on satellite hyperspectral data, aiming to improve data utilization of hyperspectral data and to achieve the same precision monitoring of multispectral data. This paper first introduces the data matching method of satellite hyperspectral data and water quality based on space-time information for guidance in collecting research data. Secondly, the customizable and fixed spectral bands of the existing multispectral camera products were studied and used for the preprocessing of hyperspectral data. Then, the determination approach of characteristic spectral bands of water quality parameters is proposed based on the correlation between the reflectance of different bands and regression modeling. Next, the model performance for retrieval of various water quality parameters was compared between the typical empirical method and artificial neural network (ANN) method of different spectral band sets with different band numbers. Finally, taking the adjusted determination coefficient R2 over bar as an evaluation index for the models, the results show that the ANN method has obvious advantages over the empirical method, and band set providing more band options improves the model performance. There is an optimal band number for the characteristic spectral bands of water quality parameters. For permanganate index (CODMn), dissolved oxygen (DO), and conductivity (EC), the R2 over bar of the optimal ANN model with three bands can reach about 0.68, 0.43, and 0.49, respectively, whose mean absolute percentage error (MAPE) values are 14.02%, 16.26%, and 17.52%, respectively. This paper provides technical guidance for efficient utilization of hyperspectral data by determination of characteristic spectral bands, the theoretical basis for customization of multispectral cameras, and the subsequent water quality monitoring through remote sensing using a multispectral drone.