Identification of Residual Stresses after Machining a Gearwheel Made by Sintering Metal Powder

被引：4

作者：

Kozovy, Peter ^{[1
]}

Sajgalik, Michal ^{[1
]}

Drbul, Mario ^{[1
]}

Holubjak, Jozef ^{[1
]}

Markovic, Jaromir ^{[1
]}

Joch, Richard ^{[1
]}

Balsianka, Robert ^{[1
]}

机构：

[1] Univ Zilina, Fac Mech Engn, Univ 8215-1, Zilina 01026, Slovakia

来源：

MANUFACTURING TECHNOLOGY | 2023年 / 23卷 / 04期

关键词：

Additive Manufacturing; Selective Laser Sintering; Machining; Residual Stress;

D O I：

10.21062/mft.2023.054

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

SLS additive technology is an innovative method of metal components production, using a high material proportion. Currently, gearwheels are still one of the most used engineering parts, not only in the automotive, but also in other industries. For example, milling is used to reduce their weight, but the material can be distorted after this operation. The occurrence of cracks propagating in the transition region after induction hardening was the reason for conducting experiments with an alternative machining technology. The article deals with the identification of an influence of machining on residual stress change of a gearwheel made of sintered metal powder. The research focuses on the effect of boring on the residual stresses using a non-destructive measurement method using rontgene diffractometry.

引用

页码：468 / 474

页数：7

共 48 条

[21] Residual stresses after deep rolling of a torsion bar made from high strength steel
Perenda, Jasenko
Trajkovski, Jovan
Zerovnik, Andrej
Prebil, Ivan
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 218 : 89 - 98
[22] Comparison of Residual Stresses in Inconel 718 Simple Parts Made by Electron Beam Melting and Direct Laser Metal Sintering (vol 46A, pg 1419, 2015)
Sochalski-Kolbus, L. M.
Payzant, E. A.
Cornwell, P. A.
Watkins, T. R.
Babu, S. S.
Dehoff, R. R.
Lorenz, M.
Ovchinnikova, O.
Duty, C.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (05): : 2322 - 2322
[23] RESIDUAL-STRESSES IN LONG COMPONENTS STRENGTHENED BY ELECTRO-CONTACT BONDING OF METAL-POWDER
VERESHCHAGIN, VA
YAROSHEVICH, VK
SOVIET ENGINEERING RESEARCH, 1982, 2 (09): : 26 - 28
[24] Evaluation of the residual stresses due to the sintering process of diamond-metal matrix hot-pressed tools
Reis, L.
Amaral, P. M.
Li, B.
de Freltas, M.
Rosa, L. Guerra
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2008, 49 (02) : 226 - 231
[25] Surface Structure Formed after Cutting-Edge and Abrasive Machining of Parts Made of Powder Materials
V. A. Skryabin
A. G. Skhirtladze
Russian Metallurgy (Metally), 2023, 2023 : 2248 - 2252
[26] Surface Structure Formed after Cutting-Edge and Abrasive Machining of Parts Made of Powder Materials
Skryabin, V. A.
Skhirtladze, A. G.
RUSSIAN METALLURGY, 2023, 2023 (13): : 2248 - 2252
[27] SPRINGBACK AND RESIDUAL-STRESSES AFTER STRETCH BENDING OF WORKHARDENING SHEET-METAL
ELMEGHARBEL, A
ELDOMIATY, A
SHAKER, M
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1990, 24 : 191 - 200
[28] Electric charge trapping, residual stresses and properties of ceramics after metal/ceramics bonding
Hattali, M. L.
Mesrati, N.
Treheux, D.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (04) : 717 - 725
[29] Machining Residual Stresses due to Turning of thermo-mechanically formed Flange Shafts made of the Material 51CrV4
Gruening, A.
Gruenert, S.
Scholtes, B.
Biermann, D.
Zabel, A.
HTM-JOURNAL OF HEAT TREATMENT AND MATERIALS, 2022, 63 (05): : 245 - 251
[30] Machining of aluminum/silicon carbide particulate metal matrix composites - Part IV. Residual stresses in the machined workpiece
El-Gallab, MS
Sklad, MP
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 152 (01) : 23 - 34

← 1 2 3 4 5 →