Energy-Saving Thermal Installations with Directed Infrared Radiation Supply

被引:0
|
作者
Avrorov, V. A. [1 ]
机构
[1] Penza State Technol Univ, Penza, Russia
关键词
infrared radiation; IR radiation generators; thermal installations with directed IR radiation supply;
D O I
10.1007/s10556-023-01228-y
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The article discusses the issues of creating energy-saving thermal installations based on the use of infrared (IR) radiators with directed radiation supply. The known IR radiators are classified and analyzed. The results of studies on the choice of the design of point sources of IR radiation for use in thermal installations providing focused-directed supply of thermal energy to heated materials without additional installation of reflectors are presented. Comparative numerical data of infrared reflector lamps and tubular thermoelectric heaters on the power of the heat flow transmitted to the irradiated material are presented. The choice of the structural material for preparation of working areas of thermal installations, which provides the best conditions for heat exchange, has been made. The power consumption of the lamp radiator is determined at different distances between the radiation surface and the heated material sample. It is shown that use of an automatic voltage-temperature controller provides an error between the set and the actual temperature in the 1.5-2 degrees C range. Examples of structural and technological schemes of thermal installations with directed supply of IR radiation are given.
引用
收藏
页码:198 / 206
页数:9
相关论文
共 50 条
  • [1] Energy-Saving Thermal Installations with Directed Infrared Radiation Supply
    V. A. Avrorov
    Chemical and Petroleum Engineering, 2023, 59 : 198 - 206
  • [2] Development and Properties of Infrared High Radiation Energy-Saving Coatings for Industrial Furnace
    Wang, Guixiang
    Chen, Zhuo
    Pan, Zuofu
    Tang, Hongyun
    2018 4TH INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND MATERIAL APPLICATION, 2019, 252
  • [3] Ferrites based infrared radiation coatings with high emissivity and high thermal shock resistance and their application on energy-saving kettle
    Zhang, Jianyi
    Fan, Xi'an
    Lu, Lei
    Hu, Xiaoming
    Li, Guangqiang
    APPLIED SURFACE SCIENCE, 2015, 344 : 223 - 229
  • [4] Research on energy-saving EDM pulse power supply
    Wang, Yukui
    Song, Boyan
    Wang, Zhenlong
    Zhao, Wansheng
    ADVANCES IN MACHINING AND MANUFACTURING TECHNOLOGY IX, 2008, 375-376 : 714 - +
  • [5] Practical Design for Energy-Saving EDM Supply System
    Wang Yukui
    Wang Zhenlong
    Song Boyan
    Hu Fuqiang
    ADVANCED PRECISION ENGINEERING, 2010, 447-448 : 247 - 252
  • [6] Energy-saving measures for the frequent control supply system
    Huang, H.F.
    Zhongguo Jishui Paishui/China Water & Wastewater, 2001, 17 (10):
  • [7] An energy-saving composite textile for thermal management
    Zhao, YueChao
    Fang, Fei
    COMPOSITES SCIENCE AND TECHNOLOGY, 2023, 237
  • [8] Design of an infrared remote control energy-saving switch
    Wang, Junli
    PROCEEDINGS OF THE 2016 4TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND INFORMATION TECHNOLOGY PROCESSING (AMITP 2016), 2016, 60 : 453 - 456
  • [9] Preparation and properties of cordierite and ferrite-based infrared radiation amorphous coating for energy-saving
    Fan, Xi-An
    Lu, Lei
    Wu, Chuan-Dong
    Cai, Xin-Zhi
    Yang, Fan
    Hu, Xiao-Ming
    Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy, 2014, 19 (05): : 750 - 755
  • [10] Current Status and Prospect of Infrared Radiation Ceramics for Energy-saving Applications in High Temperature Furnaces
    YE Jianke
    WANG Feng
    LI Jiangtao
    China's Refractories, 2015, 24 (03) : 12 - 17