Development of energy-saving innovative hydraulic mortars reusing spent coffee ground for applications in construction

被引:9
|
作者
Saeli, Manfredi [1 ]
Capela, Marinelia N. [2 ,3 ]
Piccirillo, Clara [4 ]
Tobaldi, David M. [4 ]
Seabra, M. Paula [2 ,3 ]
Scalera, Francesca [4 ]
Striani, Raffaella [5 ]
Corcione, Carola Esposito [5 ]
Campisi, Tiziana [1 ]
机构
[1] Univ Palermo, Dept Architecture, Viale Sci Bld 8-14, I-90128 Palermo, Italy
[2] Univ Aveiro, Dept Mat & Ceram Engn, P-3810193 Aveiro, Portugal
[3] Univ Aveiro, CICECO Aveiro Inst Mat, P-3810193 Aveiro, Portugal
[4] CNR NANOTEC, Inst Nanotechnol, Campus Ecoteckne, Lecce, Italy
[5] Univ Salento, Dept Engn Innovat, Via Monteroni,Km 1, I-73100 Lecce, Italy
关键词
Bio-composite mortar; Spent coffee grounds; Waste recycling; Hydraulic binder; Cost-analysis; Energy material; VALORISATION; VALORIZATION; WASTES; FOOD;
D O I
10.1016/j.jclepro.2023.136664
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
This paper reports the development of green bio-composite mortars, obtained reusing spent coffee ground (SCG), an agri-food residue, in the light of the Circular Economy approach. This process can boost the sustainability in Construction and proposes an alternative to SCG disposal in landfill, potentially dangerous to humans and the environment. For the first time, specimens were produced and compared using different blends of conventional hydraulic binders (ordinary Portland cement and natural hydraulic lime); SCG partially substituted sand (up to 15 wt%, with a 2.5% increment) for the aggregate mix. The manufacturing process was performed at ambient conditions (20 degrees C, 65% RH) resulting highly sustainable, and consisted of simple operative steps reproducible in a real building site. The prepared mixes were fully characterised to assess their technological potentials in construction. Morphology analysis, performed by Scanning Electron Microscopy (SEM), showed SCG addition led to a more compact structure. Considering the functional properties, results widely range on binder blend base, offering various concrete applications; it was observed that with SCG addition, despite a decrease in the bulk density (up to 26%), the mechanical performance still remained suitable for proper masonry applications, ac-cording to the relevant standards (class of resistance M2.5-M10). A light water imbibition increase was registered (about 5%) while a significant decrease of the capillarity index was seen. Moreover, a robust thermal conduc-tivity reduction was observed (up to 72%), making the mortars highly suitable for energy-saving uses in building. Finally, a reduction in the manufacturing cost (up to 8%) was calculated, granting significant financial saving in light of the industrial symbiosis. These encouraging results showed that reusing SCG not only provides numerous benefits to the overall building performance and management but it is also a valid alternative to usual SCG disposal. The high amount of reused bio-waste significantly widens the knowledge of greener and more efficient building sector, making the prepared mortars promising candidates for the Minimum Environmental Criteria certification, in light of the recent EU regulations, and in line with the principles of the Circular Economy.
引用
收藏
页数:13
相关论文
共 20 条
  • [1] Reusing Plastic Bottles in Energy-Saving Design and Construction
    Khalili, Mitra
    Amindeldar, Sanaz
    Mashhadibagher, Hourieh M.
    GREEN BUILDING TECHNOLOGIES AND MATERIALS II, 2013, 689 : 316 - 319
  • [2] Development of energy-saving pump for hydraulic power steering
    Koyo Seiko Co, Ltd, Osaka, Japan
    JSAE review, 1997, 18 (03): : 310 - 313
  • [3] The coffee-house: Upcycling spent coffee grounds for the production of green geopolymeric architectural energy-saving products
    Saeli, Manfredi
    Batra, Vidya S.
    Singh, Ravi Karan
    Tobaldi, David M.
    Labrincha, Joao A.
    ENERGY AND BUILDINGS, 2023, 286
  • [4] Development and Evaluation of Energy-Saving Electro-Hydraulic Actuator
    Ho, Triet Hung
    Le, Thanh Danh
    ACTUATORS, 2021, 10 (11)
  • [5] Development of turbomachines for renewable energy systems and energy-saving applications
    Giovannelli, Ambra
    5TH INTERNATIONAL CONFERENCE ON ENERGY AND ENVIRONMENT RESEARCH (ICEER 2018), 2018, 153 : 10 - 15
  • [6] Development of nanomaterials with energy-saving green processes and their applications
    Masuda, Yoshitake, 1600, Journal of the Japan Society of Powder and Powder Metallurgy, 15 Morimoto-cho Shimogamo, Sakyo-Ku Kyoto, Japan (61):
  • [7] Development of innovative energy-saving technology for cleaning tanks by dispersing deposits
    Fazlyev, Mars N.
    Demyanov, Alexey Y.
    Timirgaliyev, Mars Y.
    Bezymyannikov, Timur, I
    Muphtakhov, Eugeny M.
    Nurislamov, Emil E.
    NAUKA I TEHNOLOGII TRUBOPROVODNOGO TRANSPORTA NEFTI I NEFTEPRODUKTOV-SCIENCE & TECHNOLOGIES-OIL AND OIL PRODUCTS PIPELINE TRANSPORTATION, 2021, 11 (05): : 484 - 491
  • [9] Production of Elements for an Innovative Energy-Saving Prefabricated Construction under the Project Plus Energy Prefab House
    Jasiczak, Jozef
    Gerard, Rene-Xavier
    Wojtasik, Lech
    Przychocki, Blazej
    Bednarek, Jakub
    Cichocki, Krzysztof
    Kolodziej, Jaroslaw
    3RD WORLD MULTIDISCIPLINARY CIVIL ENGINEERING, ARCHITECTURE, URBAN PLANNING SYMPOSIUM (WMCAUS 2018), 2019, 471
  • [10] Discussing the Development of Energy-saving Construction Market in Chengdu-- Perspective to "Art of War"
    Xu Peng
    Wu Weidong
    PROCEEDINGS OF THE TWELFTH INTERNATIONAL SYMPOSIUM - MANAGEMENT SCIENCE & ENGINEERING (2013), 2013, : 284 - 288