Influence of fuel in the bismuth oxide photocatalytic performance for the degradation of acid blue-25 under visible light

In this work, we prepared bismuth oxide (Bi2O3) nanoparticles with and without fuels (citric acid and urea) using a one-pot solid-state combustion method at 400 degrees C for visible light photocatalytic degradation of acid blue 25 (AB). The nanoparticle prepared with fuel greatly influences the Bi2O3 properties such as morphology, chemical, structural, and optical properties. Bi2O3 prepared with citric acid as fuel act as an effective photocatalyst for the breakdown of acid blue 25 within 60 min under visible light irradiation. The enhanced photocatalytic property of Bi2O3 is due to the narrow band gap, high crystallinity, flower-like morphology with high active sites, and light stability of the material. Furthermore, an effective photogenerated charge separation, high charge transfer, and lower band gap, improved the absorbing capacity in the visible region of Bi2O3 (1) and enhanced its photocatalytic ability. In the photocatalytic process, the superoxide radicals (O-2(center dot)) anion played a significant role during the degradation of acid blue 25. The Bi2O3 (1) maintained its effectiveness after three reaction cycles without suffering any appreciable change in structural and functional stability. These findings demonstrated an easy method for treating the hazardous effluents into non-toxic small molecules, which can be potentially applied to purify the various textile effluent.