Dual-Band Dual-Output Doherty Power Amplifier for Unsynchronized Time-Division Duplexing

Conventional multiband power amplifiers (PAs), when working in time-division duplex (TDD), require the transmit-receive intervals of all bands to be synchronized. This is an undesirable constraint in modern radio base stations. This article proposes a dual-output dual-band Doherty PA (DB-DPA) that enables the loading of one band to be switched on-and-off without impacting the other band in normal transmission. A thorough analysis of the proposed dual-output DB-DPA architecture is presented, and a dual-output DB-DPA prototype operating at 1.4 and 2.6GHz has been designed as a proof of concept. The large-signal measurements of the prototype DB-DPA indicate Doherty behavior at both frequencies with over 56% saturation efficiency and 45% efficiency at 6-dB power back-off (PBO). Furthermore, single-band and concurrent dual-band linearized modulated measurements, using 10-MHz new radio (NR) signals with 6-dB peak-to-average power ratio (PAPR), demonstrate the linearizability of the proposed DB-DPA and its usefulness for unsynchronized TDD applications.