Effects of shear bond on quality of Friction stir additive manufactured copper

被引：7
|
作者：
Khoram, Davood [1 ]
Elyasi, Majid [1 ]
Derazkola, Hamed Aghajani [2 ]
Mirnia, Mohamad Javad [1 ]
机构：
[1] Babol Noshirvani Univ Technol, Dept Mech Engn, Babol, Iran
[2] Univ Deusto, Dept Appl Mech, Deusto, Bilbao, Iran
来源：
MATERIALS LETTERS | 2023年 / 352卷
关键词：
Friction stir additive manufacturing; Copper; Shear bond; Mechanical properties; Microstructural analysis;
D O I：
10.1016/j.matlet.2023.135153
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This study investigates the influence of the shear bond in friction stir additive manufacturing (FSAM) on the quality of printed copper sample. The shear bond is a mixture of thermo-mechanical affected zone (TMAZ) and re-heat affected zone (RAZ), formed around the ultra-fine grain region during FSAM. The shear bond is plays a crucial role in modifying the microstructure and mechanical properties of the printed layers. It is demonstrated that the presence of the shear layer enhances material strength, ductility, and fracture resistance, leading to improved overall quality of the printed samples. The microstructure size of the shear bond is 67.5% smaller than that of copper. This distinctive layer contributes to a notable 20% enhancement in the FSAM sample's performance.
引用
收藏
页数：6
相关论文
共 50 条
  • [21] Dynamic Behavior Characterization of Aluminum Alloy 7020 Manufactured Using the Additive Friction Stir Deposition Process
    Williams, M. B.
    Cahalan, L. P.
    Lopez, J. J.
    Perez-Andrade, L. I.
    Leonard, R. T., III
    McDonnell, M. M.
    Kelly, M. R.
    Lalonde, A. D.
    Brewer, L. N.
    Jordon, J. B.
    Allison, P. G.
    JOM, 2023, 75 (11) : 4868 - 4880
  • [22] Friction stir additive manufactured AA 6061/TiC/GS composite: assessment of microstructural and mechanical properties
    Maurya, Manish
    Kumar, Sudhir
    Maurya, Ambrish
    PHYSICA SCRIPTA, 2024, 99 (07)
  • [23] Base Vibration Effects on Additive Manufactured Part Quality
    Jensen, N. J.
    Parker, G. G.
    Blough, J. R.
    EXPERIMENTAL TECHNIQUES, 2024, 48 (01) : 159 - 170
  • [24] The effect of heat treatment on the microstructure and mechanical properties of 6082 aluminum alloy manufactured by friction stir additive
    Jiang, Bingxin
    Cai, Qifeng
    Tao, Huwei
    Zhang, Weicheng
    Zhang, Hua
    MATERIALS CHARACTERIZATION, 2025, 220
  • [25] Producing multilayer laminated composite of aluminium/copper by friction stir additive manufacturing process
    Choudhury, Smrity
    Roy, Manisha
    Payak, Viresh
    Acharya, Uttam
    Omoniyi, Peter
    Akinlabi, Stephen
    Akinlabi, Esther
    Roy, Barnik Saha
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2024,
  • [26] Characterization of copper-graphene nanocomposite block prepared by friction stir additive manufacturing
    Khorram, Davood
    Elyasi, Majid
    Mirnia, Mohamad Javad
    Derazkola, Hamed Aghajani
    PROGRESS IN ADDITIVE MANUFACTURING, 2025,
  • [27] Friction stir welding of copper and copper alloys
    Nakata, Kazuhiro
    Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 2005, 74 (03): : 14 - 17
  • [28] The corrosion behavior and mechanical properties of 5083 Al-Mg alloy manufactured by additive friction stir deposition
    Li, Yidi
    Yang, Biaobiao
    Zhang, Ming
    Wang, Hui
    Gong, Wei
    Lai, Ruilin
    Li, Yunping
    Teng, Jianwei
    CORROSION SCIENCE, 2023, 213
  • [29] Friction stir-based additive manufacturing
    Mishra, Rajiv S.
    Haridas, Ravi Sankar
    Agrawal, Priyanshi
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2022, 27 (03) : 141 - 165
  • [30] Local microstructure evolution and mechanical performance of friction stir additive manufactured 2195 Al-Li alloy
    Shen, Z.
    Chen, S.
    Cui, L.
    Li, D.
    Liu, X.
    Hou, W.
    Chen, H.
    Sun, Z.
    Li, W. Y.
    MATERIALS CHARACTERIZATION, 2022, 186
12345