Improvement of dynamic compression properties and strengthening mechanism of Mg-Y-Nd-Gd-Zr alloy by pre-twinning

被引:1
|
作者
Chang, Guoqi [1 ,2 ,3 ,4 ]
Li, Wei [1 ,3 ,4 ]
Deng, Guisheng [1 ,3 ,4 ]
Liu, Yuandong [1 ,3 ,4 ]
机构
[1] Guizhou Univ, Coll Mat & Met, Guiyang 550025, Peoples R China
[2] Guizhou Aerosp Fenghua Precis Equipment Co Ltd, Guiyang 550009, Peoples R China
[3] Guizhou Univ, Guizhou Key Lab Mech Behav & Microstruct Mat, Guiyang, Peoples R China
[4] Natl & Local Joint Engn Lab High Performance Met S, Guiyang, Peoples R China
基金
中国国家自然科学基金;
关键词
MAGNESIUM ALLOYS; MICROSTRUCTURE EVOLUTION; BEHAVIOR; DEFORMATION; TEXTURE; RECRYSTALLIZATION; PRECIPITATION; IMPACT; TWINS;
D O I
10.1007/s10853-023-08521-4
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The effects of pre-twinning on the microstructure and dynamic compression properties of non-aged and artificially aged Mg-Y-Nd-Gd-Zr alloys were investigated in this study. Previous studies have shown that in the pre-deformed T3 alloy, precompression along the extrusion direction (ED) generates high-density a > and < c + a > dislocations and deformation twins, such as the {10 (1) over bar2} < 10 (11) over bar > extension, the {10 (1) over bar1} - {10 (1) over bar2} double, and {10 (1) over bar1} < 10 (12) over bar > compression twins at 86 degrees, 38 degrees, and 56 degrees, respectively. In the pre-deformed T8 alloy artificially aged at 200 degrees C for 12 h, the dislocation density was found to decrease, with beta" (Mg3Y0.85Nd0.15) and beta' (Mg12NdY) precipitates appearing at both ends of the twin boundary. Subsequently, the precipitates extended toward [0001](Mg) and [0001](T) in the matrix region and the twin, respectively. The orientation relationships (ORs) between the beta" and beta' precipitates and the matrix/twin were determined to be (01 (1) over bar0)(beta") //(0001)(Mg/T), [2 (11) over bar0](beta")//[2 (11) over bar0](Mg/T) and (001)beta'//(0001)(Mg/T), [2 (11) over bar0](beta')//[2 (11) over bar0](Mg/T), respectively, in contrast to the counterpart ORs between the beta" and beta' precipitates and the matrix/twin in the non-deformed T61 alloy. Evaluation of the dynamic compression properties showed that compared with the compressive yield strength (CYS) of the T61 alloy, that of the T8 alloy considerably increased from 220 to 339 MPa. However, their ultimate compressive strengths (UCSs) of 363 and 360 MPa, respectively, were similar owing to the synergistic effect between the dislocations, the twin boundaries, and the precipitates. These results suggest that the pre-twinning approach should be adopted to improve the strengths of magnesium alloys.
引用
收藏
页码:8515 / 8534
页数:20
相关论文
共 50 条
  • [31] Effect of pre-deformation on the mechanical properties of Mg-Gd-Y-Zr alloy
    Research Center of Process Engineering for Non-Ferrous Metals, General Research Institute for Non-Ferrous Metals, Beijing 100088, China
    Xiyou Jinshu, 2008, 4 (522-525): : 522 - 525
  • [32] Microstructure and strengthening mechanism of high strength Mg-10Gd-2Y-0.5Zr alloy
    He, S.M.
    Zeng, X.Q.
    Peng, L.M.
    Gao, X.
    Nie, J.F.
    Ding, W.J.
    1600, Elsevier Ltd (427): : 1 - 2
  • [33] Analysis of abnormal texture formation and strengthening mechanism in an extruded Mg-Gd-Y-Zn-Zr alloy
    Jin, Xueze
    Xu, Wenchen
    Yang, Zhongze
    Yuan, Can
    Shan, Debin
    Teng, Bugang
    Jin, Bo Cheng
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2020, 45 : 133 - 145
  • [34] Analysis of abnormal texture formation and strengthening mechanism in an extruded Mg-Gd-Y-Zn-Zr alloy
    Xueze Jin
    Wenchen Xu
    Zhongze Yang
    Can Yuan
    Debin Shan
    Bugang Teng
    Bo Cheng Jin
    JournalofMaterialsScience&Technology, 2020, 45 (10) : 133 - 145
  • [35] Microstructure and strengthening mechanism of high strength Mg-10Gd-2Y-0.5Zr alloy
    He, S. M.
    Zeng, X. Q.
    Peng, L. M.
    Gao, X.
    Nie, J. F.
    Ding, W. J.
    JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 427 (1-2) : 316 - 323
  • [36] Strengthening and toughening mechanisms of an ultrafine grained Mg-Gd-Y-Zr alloy processed by cyclic extrusion and compression
    Wang, Qudong
    Mu, Yongliang
    Lin, Jinbao
    Zhang, Li
    Roven, Hans J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 699 : 26 - 30
  • [37] Analysis on micro-structure and mechanical properties of Mg-Gd-Y-Nd-Zr alloy and its reinforcement mechanism
    Liu Qiuzu
    Ding Xiaofeng
    Liu Yanping
    Wei Xiaojia
    JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 690 : 961 - 965
  • [38] Effect of stacking faults in nanograins on the tensile properties of Mg-Y-Nd-Gd-Zr alloys subjected to ultrasonic surface rolling processing
    Chen, Linbo
    Li, Wei
    Luo, Mei
    SURFACE & COATINGS TECHNOLOGY, 2022, 436
  • [39] Analysis on micro-structure and mechanical properties of Mg-Gd-Y-Nd-Zr alloy and its reinforcement mechanism
    Qiuzu, Liu
    Xiaofeng, Ding
    Yanping, Liu
    Xiaojia, Wei
    Journal of Alloys and Compounds, 2017, 690 : 961 - 965
  • [40] Homogeneity of Mg-Gd-Y-Nd-Zr alloy as-cast
    Xu, Ke
    Cai, Xing-Ke
    Wu, Li-Hui
    Yang, Liu
    Deng, Yun-Lai
    Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2009, 40 (05): : 1240 - 1244