Homogenization of Inconel 625 based periodic auxetic lattice structures with varying strut thickness

被引：1
|
作者：
Mishra, Akshansh [1 ]
Jatti, Vijaykumar S. [2 ]
Sefene, Eyob Messele [3 ]
Makki, Emad [4 ]
机构：
[1] Politecn Milano Univ, Sch Ind & Informat Engn, Milan, Italy
[2] Symbiosis Inst Technol, Dept Mech Engn, Pune, India
[3] Natl Taiwan Univ Sci & Technol, Dept Mech Engn, Taipei, Taiwan
[4] Umm Al Qura Univ, Coll Engn & Architecture, Dept Mech Engn, Mecca 24382, Saudi Arabia
来源：
APL MATERIALS | 2024年 / 12卷 / 02期
关键词：
Homogenization method - Struts;
D O I：
10.1063/5.0195388
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The purpose of this research is to analyze the mechanical behavior of auxetic re-entrant-based metamaterials with properties similar to Inconel 625 using homogenization techniques. Through a thorough analysis, this study investigates the displacement patterns exhibited in various materials throughout a range of thicknesses. The examination also includes analyzing how the Young's modulus changes with varying strut thickness after homogenization. This detailed investigation provides information on the stiffness and deformation response of the material. This research advances our knowledge of the complex mechanical properties of re-entrant-based auxetic metamaterials that resemble Inconel 625 by interpreting these displacement and Young's modulus patterns.
引用
收藏
页数：15
相关论文
共 50 条
  • [31] Multiscale eigenfrequency optimization of multimaterial lattice structures based on the asymptotic homogenization method
    Fan, Zhirui
    Yan, Jun
    Wallin, Mathias
    Ristinmaa, Matti
    Niu, Bin
    Zhao, Guozhong
    STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION, 2020, 61 (03) : 983 - 998
  • [32] Multiscale eigenfrequency optimization of multimaterial lattice structures based on the asymptotic homogenization method
    Zhirui Fan
    Jun Yan
    Mathias Wallin
    Matti Ristinmaa
    Bin Niu
    Guozhong Zhao
    Structural and Multidisciplinary Optimization, 2020, 61 : 983 - 998
  • [33] Design and fabrication of periodic lattice-based cellular structures
    Gorguluarslan R.M.
    Gandhi U.N.
    Mandapati R.
    Choi S.-K.
    Gorguluarslan, Recep M. (rmg@gatech.edu), 1600, Bellwether Publishing, Ltd. (13) : 50 - 62
  • [34] Novel 3D auxetic lattice structures developed based on the rotating rigid mechanism
    Gao, Ying
    Wei, Xingyu
    Han, Xingkai
    Zhou, Zhengong
    Xiong, Jian
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2021, 233
  • [35] Insight into the mechanical properties of 3D printed strut-based lattice structures
    Ali, Hafiz Muhammad Asad
    Abdi, Meisam
    Sun, Yong
    PROGRESS IN ADDITIVE MANUFACTURING, 2023, 8 (05) : 919 - 931
  • [36] A strut-based process planning method for wire arc additive manufacturing of lattice structures
    Yu, Ziping
    Ding, Donghong
    Pan, Zengxi
    Li, Huijun
    Lu, Qinghua
    Fang, Xuewei
    JOURNAL OF MANUFACTURING PROCESSES, 2021, 65 : 283 - 298
  • [37] Insight into the mechanical properties of 3D printed strut-based lattice structures
    Hafiz Muhammad Asad Ali
    Meisam Abdi
    Yong Sun
    Progress in Additive Manufacturing, 2023, 8 : 919 - 931
  • [38] Bloch-based and homogenization procedures for investigating wave propagation periodic poroelastic structures
    Nguyen, V-H
    Rohan, E.
    Naili, S.
    ADVANCES IN ENGINEERING MATERIALS, STRUCTURES AND SYSTEMS: INNOVATIONS, MECHANICS AND APPLICATIONS, 2019, : 263 - 268
  • [39] Research on the energy absorption performance of lattice filling structures based on homogenization analysis technique
    Liao, Liqi
    Yan, Kun
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2024,
  • [40] Numerical and experimental investigation on flexural properties of selective laser melting (SLM) manufactured strut lattices structures from Ti-6Al-4V and Inconel 625
    Condruz, Mihaela Raluca
    Badea, Teodor Adrian
    Paraschiv, Alexandru
    MATERIALS TODAY COMMUNICATIONS, 2024, 40
12345