A Bi-Invariant Approach to Approximate Motion Synthesis of Planar Four-Bar Linkage

被引:4
|
作者
Xu, Tianze [1 ]
Myszka, David H. [1 ]
Murray, Andrew P. [1 ]
机构
[1] Univ Dayton, Dept Mech & Aerosp Engn, 300 Coll Pk, Dayton, OH 45469 USA
关键词
linkage synthesis; approximate motion; bi-invariance; METRICS;
D O I
10.3390/robotics13010013
中图分类号
TP24 [机器人技术];
学科分类号
080202 ; 1405 ;
摘要
This paper presents a planar four-bar approximate motion synthesis technique that uses only pole locations. Synthesis for rigid-body guidance determines the linkage dimensions that guide a body in a desired manner. The desired motion is specified with task positions including a location and orientation angle. Approximation motion synthesis is necessary when an exact match to the task positions cannot be obtained. A linkage that achieves the task positions as closely as possible becomes desired. Structural error refers to the deviations between the task positions and the linkage's generated positions. A challenge in approximate motion synthesis is that structural error involves metrics that include location and orientation. A best-fit solution is not evident because the structural error is based on an objective function that combines the location and orientation. Such solutions lack bi-invariance because a change in reference for the motion changes the values of the metric. This work uses only displacement poles, described solely by their coordinates, as they sufficiently characterize the relative task positions. The optimization seeks to minimize the distance between the poles of the task positions and the poles of the generated positions. The use of poles results in a bi-invariant statement of the problem.
引用
收藏
页数:15
相关论文
共 50 条
  • [41] Kinematic synthesis of planar four-bar mechanisms for multi-phase motion generation with tolerances
    Sodhi, RS
    Russell, K
    MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES, 2004, 32 (02) : 215 - 233
  • [42] Dynamic Behavior Analysis of a Planar Four-bar Linkage with Multiple Clearances Joint
    Varedi, S. M.
    Daniali, H. M.
    Dardel, M.
    Fathi, A.
    INTERNATIONAL JOURNAL OF ENGINEERING, 2015, 28 (02): : 243 - 250
  • [43] An optimal design method of reproducing a given trajectory for planar four-bar linkage
    Xu Jinge
    INTERNATIONAL CONFERENCE ON MECHANICAL DESIGN AND SIMULATION (MDS 2022), 2022, 12261
  • [44] Computer-aided curvature analyses of planar four-bar linkage mechanism
    Wu, TM
    Chen, CK
    APPLIED MATHEMATICS AND COMPUTATION, 2005, 168 (02) : 1175 - 1188
  • [45] Kinematic synthesis of planar four-bar mechanisms for multi-phase motion generation with tolerances
    Sodhi, Raj S.
    Russell, Kevin
    Mech. Based Des. Struct. Mach., 1600, 2 (215-233):
  • [46] A NOVEL SYNTHESIS METHOD FOR THREE-POSITION MOTION GENERATION WITH PLANAR FOUR-BAR MECHANISMS
    Han, Jianyou
    Yang, Tong
    PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES AND COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE 2012, VOL 4, PTS A AND B, 2012, : 419 - 426
  • [47] Synthesis of Planar Four-bar for Generating Path with Prescribed Arc
    Chung, Wen-Yeuan
    ENGINEERING AND MANUFACTURING TECHNOLOGIES, 2014, 541-542 : 808 - 812
  • [48] A Revisit of the Planar Four-Bar Linkage Synthesis Problem for Two and Three Input-Output Positions
    Simionescu, P. A.
    PROCEEDINGS OF THE 2022 USCTOMM SYMPOSIUM ON MECHANICAL SYSTEMS AND ROBOTICS, 2022, 118 : 188 - 197
  • [49] Feasible Solutions for Two-Pose Motion Generation with a Four-Bar Linkage
    Hwang, Wen-Miin
    Chen, Yi-Jie
    JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, 2009, 30 (02): : 107 - 113
  • [50] Method to synthesize four-bar linkage with a coupler curve of approximate straight-line
    Han, Jianyou
    Funk, W.
    Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering, 1996, 32 (05): : 19 - 23