Valorization of Vegetal Fibers (Hemp, Flax, Miscanthus and Bamboo) in a Fiber Reinforced Screed (FRS) Formulation

被引:5
|
作者
Ribera, Sergio Pons [1 ]
Hamzaoui, Rabah [1 ]
Colin, Johan [1 ]
Bessette, Laetitia [2 ,3 ]
Audouin, Marie [4 ]
机构
[1] ESTP Paris, Inst Rech Constructibil, 28 Ave President Wilson, F-94234 Paris, France
[2] Sigma Beton, 4 Rue Aristide Berges, F-38080 Lisle Dabeau, France
[3] VICAT, 4 Rue Aristide Berges, F-38080 Lisle Dabeau, France
[4] Fibres Rech Dev, Technopole Aube Champagne,Hotel Bur 2-2 Rue Gustav, F-10430 Rosieres Pres Troyes 9, France
关键词
fiber reinforced screed (FRS); fiber reinforced mortar (FRM); vegetal fibers; hemp; flax; miscanthus; bamboo; cement; synthetic fibers; mortar; CEMENT-BASED COMPOSITES; DATE PALM FIBERS; MECHANICAL-PROPERTIES; FLEXURAL BEHAVIOR; CONCRETE; PERFORMANCE; SHRINKAGE; STRENGTH; CRACKING; IMPACT;
D O I
10.3390/ma16062203
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
A persistent rise in the costs of construction materials has led to the need to address this problem in line with the Sustainable Development Goals. This research employed vegetal soft and rigid fibers in a screed mortar to produce a sustainable fabric-cement matrix. Four different vegetal-dried fibers (hemp, flax, miscanthus, and bamboo) with dosages of 0.4, 0.6, 0.8, 1.2, 2, and 4 kg/m(3) were used. Laboratory investigations were slump test, bulk density, air occluded, shrinkage, and mechanical strength. Scanning Electron Microscope (SEM) assessments were performed and analyzed on the natural fibers and the screed formulation. The results highlight that fiber dosages significantly influence the above-mentioned properties.
引用
收藏
页数:31
相关论文
共 39 条
  • [21] Mechanical and thermal characterization of compression moulded polylactic acid natural fiber composites reinforced with hemp and lyocell fibers
    20142117736171
    Skrifvars, M. (mikael.skrifvars@hb.se), 1600, John Wiley and Sons Inc (131):
  • [22] Mechanical and Thermal Characterization of Compression Moulded Polylactic Acid Natural Fiber Composites Reinforced with Hemp and Lyocell Fibers
    Baghaei, Behnaz
    Skrifvars, Mikael
    Rissanen, Marja
    Ramamoorthy, Sunil Kumar
    JOURNAL OF APPLIED POLYMER SCIENCE, 2014, 131 (15)
  • [23] Direct Comparison of the Structural Compression Characteristics of Natural and Synthetic Fiber-Epoxy Composites: Flax, Jute, Hemp, Glass and Carbon Fibers
    Bambach, Mike R.
    FIBERS, 2020, 8 (10) : 1 - 14
  • [24] Influence of fiber volume fractions on the performances of alkali modified hemp fibers reinforced cyanate ester/benzoxazine blend composites
    Zegaoui, Abdeldjalil
    Derradji, Mehdi
    Ma, Rui-kun
    Cai, Wan-an
    Medjahed, Aboubakr
    Liu, Wen-bin
    Dayo, Abdul Qadeer
    Wang, Jun
    Wang, Gui-xiang
    MATERIALS CHEMISTRY AND PHYSICS, 2018, 213 : 146 - 156
  • [25] Natural fiber reinforced inorganic foam composites from short hemp bast fibers obtained by mechanical decortation of unretted stems from the wastes of hemp cultivations
    Viscusi, Gianluca
    Barra, Giuseppina
    Verdolotti, Letizia
    Galzerano, Barbara
    Viscardi, Massimo
    Gorrasi, Giuliana
    MATERIALS TODAY-PROCEEDINGS, 2021, 34 : 176 - 179
  • [26] Optimization of dry sliding wear performance of TiO2 filled bamboo and flax fiber reinforced epoxy composites using Taguchi approach
    Prabhu, Ravikantha
    Mendonca, Sharun
    Bellairu, Pavana Kumara
    D'Souza, Rudolf Charles
    Bhat, Thirumaleshwara
    WORLD JOURNAL OF ENGINEERING, 2024, 21 (05) : 882 - 893
  • [27] Mechanical Properties and Water Absorption of Hemp Fibers-Reinforced Unsaturated Polyester Composites: Effect of Fiber Surface Treatment with a Heterofunctional Monomer
    Chen, Tingting
    Liu, Wendi
    Qiu, Renhui
    BIORESOURCES, 2013, 8 (02): : 2780 - 2791
  • [28] Synthesis of Alfa (Stipa tenacissima L.)/Hemp Fiber-Reinforced UHMWPE: Impact of Fibers on Mechanical, Microstructural and Aspect Properties
    Vinod B.
    Suresh S.
    Reddy S.S.K.
    Sudhakara D.
    Elaiyarasan U.U.
    J. Inst. Eng. Ser. D, 2 (611-620): : 611 - 620
  • [29] Improvement of the Mechanical Properties of Biodegradable Hemp Fiber Reinforced Poly(lactic acid) (PLA) Composites by the Admixture of Man-made Cellulose Fibers
    Graupner, Nina
    JOURNAL OF COMPOSITE MATERIALS, 2009, 43 (06) : 689 - 702
  • [30] Impact of stacking sequence on mechanical and dry sliding wear properties of bamboo and flax fiber reinforced hybrid epoxy composite filled with TiO2 filler
    Prabhu, Ravikantha
    Mendonca, Sharun
    Bellairu, Pavana Kumara
    D'Souza, Rudolf
    Bhat, Thirumaleshwara
    MULTIDISCIPLINE MODELING IN MATERIALS AND STRUCTURES, 2024, 20 (06) : 1180 - 1191