Modeling of coastal effluent transport:an approach to linking far-field and near-field models

One of the challenges in effluent transport modeling in coastal tidal environments is the proper specification of initial dilution in connection with the far-field transport phenomena. An approach of external linkage of far-field and near-field effluent transport models is presented, and applied to simulating the effluent transport in the Port Angeles Harbor, Washington in the Strait of Juan de Fuca. A near-field plume model was used to calculate the effluent initial dilution and a three-dimensional (3-D) hydrodynamic model was developed to simulate the tidal circulation and far-field effluent transport in the Port Angeles Harbor. The hydrodynamic model was driven by tides and surface winds. Observed water surface elevation and velocity data were used to calibrate the model over a period covering the neap-spring tidal cycle. The model was also validated with observed surface drogue trajectory data. The model successfully reproduced the tidal dynamics in the study area and good agreements between model results and observed data were obtained. It is demonstrated that the linkage between the near-field and far-field models in effluent transport modeling can be achieved through iteratively adjusting the model grid sizes such that the dilution ratio and effluent concentration in the circulation model grid cell match the concentration calculated by the near-field plume model.