In situ microtomography investigation of microstructural evolution in Al-Cu alloys during holding in semi-solid state

被引：1

作者：

S.TERZI ^{[1
]}

L.SALVO ^{[2
]}

M.SUERY ^{[2
]}

A.DAHLE ^{[1
]}

E.BOLLER ^{[3
]}

机构：

[1] Australian Research Council Centre of Excellence for Design in Light Metals,Materials Engineering,The University of Queensland,Brisbane Queensland 4072,Australia

[2] Université de Grenoble,Science et Ingénierie des Matériaux et Procédés,Génie Physique et Mécanique des Matériaux,UMR CNRS 5266,Grenoble INP,Université Joseph Fourrier,BP46,38402 Saint-Martin d'Hères Cedex,France

[3] European Synchrotron Radiation Facility,6 rue Jules Horowitz,BP220,38043 Grenoble Cedex,France

来源：

Transactions of Nonferrous Metals Society of China | 2010年 / 20(S3)卷 / S3期

关键词：

Al-Cu alloys; microtomography; remelting; microstructure;

D O I：

暂无

中图分类号：

TG146 [有色金属及其合金];

学科分类号：

摘要：

The aim of this paper is to report the results of experiments carried out on Al-Cu alloys with different Cu contents,studying the microstructure evolution during holding in the semi-solid state.The 3-D microstructure was observed by in situ X-ray microtomography carried out at ESRF Grenoble,France.The variation of the solid-liquid interface area per unit volume during holding was determined.In addition,local observations show that two coarsening mechanisms of the solid particles occur simultaneously:dissolution of small particles to the benefit of larger ones by an Ostwald-type mechanism and the growth of necks between solid particles due to coalescence.These observations confirm that in situ X-ray tomography is a very powerful tool to study the microstructure evolution in the semi-solid state and the influencing mechanisms in real-time.

引用

页码：734 / 738

页数：5

共 50 条

[31] Microstructural evolution and mechanical properties of back-extruded Al 7075 alloy in the semi-solid state
Hossein Mohammadi
Mostafa Ketabchi
Ali Kalaki
International Journal of Material Forming, 2012, 5 : 109 - 119
[32] In situ X-ray microtomography study of the solidification and remelted microstructures of Al-Cu alloys
Terzi, S.
Boller, E.
Salvo, L.
Suery, M.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2009, 22 (1-4) : 275 - 278
[33] Microstructural evolution and mechanical properties of back-extruded Al 7075 alloy in the semi-solid state
Mohammadi, Hossein
Ketabchi, Mostafa
Kalaki, Ali
INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2012, 5 (02) : 109 - 119
[34] Microstructural evolution of semi-solid A356 alloy during reheating
Hu, Yong
Zhao, Longzhi
Liu, Dejia
Tang, Yanchuan
Jiang, Hui
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2018, 109 (10) : 951 - 956
[35] Semi-solid compression of nano/micro-particle reinforced Al-Cu composites: An in situ synchrotron tomographic study
Wang, Wei
Guo, Enyu
Phillion, A.B.
Eskin, Dmitry G.
Wang, Tongmin
Lee, Peter D
Materialia, 2020, 12
[36] Semi-solid compression of nano/micro-particle reinforced Al-Cu composites: An in situ synchrotron tomographic study
Wang, Wei
Guo, Enyu
Phillion, A. B.
Eskin, Dmitry G.
Wang, Tongmin
Lee, Peter D.
MATERIALIA, 2020, 12
[37] MICROSTRUCTURAL EVOLUTION AND HARDNESS VARIATION IN THE 2-PHASE AL-CU ALLOYS
KULKARNI, MS
KASHYAP, BP
ZEITSCHRIFT FUR METALLKUNDE, 1992, 83 (02): : 123 - 127
[38] Hot tearing susceptibility and fluidity of semi-solid gravity cast Al-Cu alloy
Wannasin, J.
Schwam, D.
Yurko, J. A.
Rohloff, C.
Woycik, G.
SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES, 2006, 116-117 : 76 - 79
[39] Study of Microstructure Evolution during Semi-Solid Processing of an In-Situ Al Alloy Composite
Kumar, Santosh
Das, Prosenjit
Tiwari, Sandeep K.
Mondal, Manas K.
Bera, Supriya
Roy, Himadri
Samanta, Sudip K.
MATERIALS AND MANUFACTURING PROCESSES, 2015, 30 (03) : 356 - 366
[40] APPARENT SOLID REGION OF AL-CU ALLOYS DURING SOLIDIFICATION
YAMAUCHI, I
KISHIDA, K
OHNAKA, I
FUKUSAKO, T
JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1977, 41 (06) : 589 - 595

← 1 2 3 4 5 →