Micro-EDM Milling of Complex 3D Structure with Fix-Length Compensation Method

被引：0
|
作者：
董颖怀 [1 ]
机构：
[1] School of Mechatronics Engineering,Harbin Institute of Technology
来源：
Journal of Wuhan University of Technology(Materials Science) | 2009年 / S1期
基金：
中国国家自然科学基金;
关键词：
micro-EDM milling; compensation; cAM;
D O I：
暂无
中图分类号：
TP211.4 [];
学科分类号：
0804 ; 080401 ; 080402 ;
摘要：
A human face with complex 3D structure is machined with a modified fix-length compensation method in this paper.The fast development of MEMS (Micro Electromechanical Systems) has strongly enhanced the application of new harder work materials.As a low cost,flexible,good repeatable machining process with negligible process forces,micro-EDM milling is well suited for freeform metallic micro structures.A major problem in micro-EDM milling of complex 3D structure is the electrode wear.A new CAM system based on the UG software platform is developed in order to get good accuracy and higher efficiency.A correction coefficient is introduced and deduced for the modified fix-length compensation method.Using this method a human face with complex 3D stricter is machined successfully by micro-EDM milling.
引用
收藏
页码：241 / 243
页数：3
相关论文
共 50 条
  • [21] The wear of foil queue microelectrode in 3D micro-EDM
    Xu, Bin
    Guo, Kang
    Zhu, Li-kuan
    Wu, Xiao-yu
    Lei, Jian-guo
    Zhao, Hang
    Tang, Yong
    Liang, Xiong
    International Journal of Advanced Manufacturing Technology, 2019, 104 (5-8): : 3107 - 3117
  • [22] The wear of foil queue microelectrode in 3D micro-EDM
    Xu, Bin
    Guo, Kang
    Zhu, Li-kuan
    Wu, Xiao-yu
    Lei, Jian-guo
    Zhao, Hang
    Tang, Yong
    Liang, Xiong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 104 (5-8): : 3107 - 3117
  • [23] The wear of foil queue microelectrode in 3D micro-EDM
    Bin Xu
    Kang Guo
    Li-kuan Zhu
    Xiao-yu Wu
    Jian-guo Lei
    Hang Zhao
    Yong Tang
    Xiong Liang
    The International Journal of Advanced Manufacturing Technology, 2019, 104 : 3107 - 3117
  • [24] Micro-milling and micro-EDM residual stresses evaluation on post-processed 3D printed samples
    Hikaru, Abe
    Binti Juanih, Iman Farhana
    Quarto, Mariangela
    Abeni, Andrea
    Attanasio, Aldo
    D'Urso, Gianluca
    Ginestra, Paola
    Matsumura, Takashi
    MATERIAL FORMING, ESAFORM 2024, 2024, 41 : 1860 - 1866
  • [25] Applying a foil queue micro-electrode in micro-EDM to fabricate a 3D micro-structure
    Xu, Bin
    Guo, Kang
    Wu, Xiao-yu
    Lei, Jian-guo
    Liang, X. Ong
    Guo, Deng-ji
    Ma, Jiang
    Cheng, Rong
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2018, 28 (05)
  • [26] MICROMACHINING 3D HEMISPHERICAL FEATURES IN SILICON VIA MICRO-EDM
    Chan, M. L.
    Fonda, P.
    Reyes, C.
    Xie, J.
    Najar, H.
    Lin, L.
    Yamazaki, K.
    Horsley, D. A.
    2012 IEEE 25TH INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS (MEMS), 2012,
  • [27] Micro-EDM and micro-USM combined milling of ZrB2-SiC-graphite composite for 3D micro-cavities
    Huichao Li
    Zhenlong Wang
    Yukui Wang
    Hongzheng Liu
    Zhaoxi Zhao
    The International Journal of Advanced Manufacturing Technology, 2018, 99 : 2635 - 2645
  • [28] Micro-EDM and micro-USM combined milling of ZrB2-SiC-graphite composite for 3D micro-cavities
    Li, Huichao
    Wang, Zhenlong
    Wang, Yukui
    Liu, Hongzheng
    Zhao, Zhaoxi
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 99 (9-12): : 2635 - 2645
  • [29] Surface Quality Improvement of 3D Microstructures Fabricated by Micro-EDM with a Composite 3D Microelectrode
    Lei, Jianguo
    Jiang, Kai
    Wu, Xiaoyu
    Zhao, Hang
    Xu, Bin
    MICROMACHINES, 2020, 11 (09)
  • [30] Micro-milling/micro-EDM combined processing technology for complex microarray cavity fabrication
    Wang, Han
    Li, Yang
    Chen, Xiang
    Jia, Yuchao
    Chi, Guanxin
    Wang, Yukui
    Wang, Zhenlong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 113 (3-4): : 1057 - 1071
12345