Model to Study Resin Impregnation Process of Premix Made of Friction Spun Core Yarn

被引：0
|
作者：
丁辛
吴学东
机构：
来源：
Journal of DongHua University | 2001年 / 02期
关键词：
resin impregnation; consolidation process; friction spun core yarn; thermoplastic composite;
D O I：
10.19884/j.1672-5220.2001.02.001
中图分类号：
TS104 [纺纱理论与纺纱工艺];
学科分类号：
082101 ;
摘要：
A model was developed to investigate impregnation behavior of thermoplastic resin into filament bundle based on Darcy’s law. Consolidation processes of unidirectional laminate were performed to evaluate the validity of the model. Friction spun core yarns were used in the experiments with polypropylene fiber sheath and glass filament core. The processing conditions, such as temperature and pressure, and filament parameters were taken into consideration. A good agreement was found between theoretical prediction and experiment data.
引用
收藏
页码：1 / 4
页数：4
相关论文
共 50 条
  • [41] Study of optimum spinning parameters for production of T-400/cotton core spun yarn by ring spinning
    Akankwasa, Nicholus Tayari
    Wang, Jun
    Zhang, Yuze
    JOURNAL OF THE TEXTILE INSTITUTE, 2016, 107 (04) : 504 - 511
  • [42] A study on the effect of construction parameters of metallic wire/core spun yarn based knitted fabrics on electromagnetic shielding
    Rajendrakumar, K.
    Thilagavathi, G.
    JOURNAL OF INDUSTRIAL TEXTILES, 2013, 42 (04) : 400 - 416
  • [43] A Mathematical Model for Rotor-Spun Composite Yarn Spinning Process (vol 80, pg 487, 2010)
    Yang, Rui-Hua
    Wang, Shan-Yuan
    TEXTILE RESEARCH JOURNAL, 2010, 80 (19) : 2109 - 2109
  • [44] Influence of process parameters on migrational characteristics of open-end and core-sheath friction spun yarns
    Ishtiaque, S. M.
    Das, A.
    Vishnoi, P.
    JOURNAL OF THE TEXTILE INSTITUTE, 2006, 97 (03) : 211 - 222
  • [45] Influence of process parameters on packing density of open-end and core-sheath friction spun yarns
    Ishtiaque, S. M.
    Das, A.
    Vishnoi, Prashant
    INDIAN JOURNAL OF FIBRE & TEXTILE RESEARCH, 2011, 36 (02) : 152 - 157
  • [46] Influence of process parameters on properties of open-end and core-sheath friction spun acrylic yarns
    Das, A.
    Ishtiaque, S. M.
    Vishnoi, P.
    JOURNAL OF THE TEXTILE INSTITUTE, 2007, 98 (06) : 513 - 521
  • [47] Influence of process parameters on packing density of open-end and core-sheath friction spun yarns
    Ishtiaque, S.M.
    Dasa, A.
    Vishnoi, Prashant
    Indian Journal of Fibre and Textile Research, 2011, 36 (02): : 152 - 157
  • [48] Effect of drawing ratio on mechanical properties of core-spun elastic yarn made by a multi-section drawing frame and a ring spinning frame
    Lou, C. W.
    Chang, C. W.
    Chen, J. M.
    Tai, K. C.
    Lin, J. H.
    JOURNAL OF ADVANCED MATERIALS, 2007, 39 (03): : 59 - 64
  • [49] Study of epoxy resin curing process by applying internal friction technique
    Kubisztal, M.
    Haneczok, G.
    Chrobak, A.
    Kubik, A.
    Rasek, J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 521-22 : 283 - 286
  • [50] Multiscale Model of the RTM Process: From Mesoscale Anisotropic Permeability of Woven Structures to Macroscale Resin Impregnation
    Xiao, Yang
    Xu, Junbo
    Wang, Min
    Wang, Bingyin
    Yuan, Shaojun
    Yang, Chao
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2021, 60 (22) : 8269 - 8279
12345