Dissimilar Al/Mg alloys friction stir lap welding with Zn foil assisted by ultrasonic

被引：1
|
作者：
Shude Ji [1 ]
Shiyu Niu [1 ]
Jianguang Liu [2 ]
机构：
[1] School of Aerospace Engineering,Shenyang Aerospace University
[2] Beijing Key Laboratory of Civil Aircraft Structures and Composite Materials,Beijing Aeronautical Science & Technology Research Institute of COMAC
来源：
JournalofMaterialsScience&Technology | 2019年 / 35卷 / 08期
基金：
中国国家自然科学基金;
关键词：
Dissimilar Al/Mg alloys; Friction stir lap welding; Zn foil; Ultrasonic power; Microstructures; Tensile shear load;
D O I：
暂无
中图分类号：
TG453.9 [];
学科分类号：
摘要：
The Zn-added ultrasonic assisted friction stir lap welding(UaFSLW) was carried out to improve the quality of dissimilar Al/Mg alloys joint. The effects of ultrasonic power on the joint quality were also investigated.The results indicated that the larger effective lap width and mixing region between Mg and Al(Mg/Al MR) were attained by Zn foil addition and external ultrasonic assistance. Compared with the conventional joint, the finer and better-distributed Mg-Zn IMCs placing the continuous Al-Mg IMCs were formed in the Mg/Al MR of the Zn-added UaFSLW joint. The Zn foil addition and external ultrasonic assistance significantly improved the tensile shear load of the joint, and the load was increased with the increase of the ultrasonic power. The maximum tensile shear load of 7.95 kN was attained, which was 52.6% larger than that of the conventional joint.
引用
收藏
页码：1712 / 1718
页数：7
相关论文
共 50 条
  • [31] Material flow during dissimilar friction stir welding of Al/Mg alloys
    Yang, Chengle
    Chen, Gaoqiang
    Qiao, Junnan
    Wu, Chuansong
    Zhou, Mengran
    Zhang, Gong
    Shi, Qingyu
    International Journal of Mechanical Sciences, 2024, 272
  • [32] Material flow during dissimilar friction stir welding of Al/Mg alloys
    Yang, Chengle
    Chen, Gaoqiang
    Qiao, Junnan
    Wu, Chuansong
    Zhou, Mengran
    Zhang, Gong
    Shi, Qingyu
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2024, 272
  • [33] Constitutional liquation during dissimilar friction stir welding of Al and Mg alloys
    Sato, YS
    Park, SHC
    Michiuchi, M
    Kokawa, H
    SCRIPTA MATERIALIA, 2004, 50 (09) : 1233 - 1236
  • [34] Friction Stir Lap Welding of Mg/Ti Dissimilar Alloys Using a Slight Penetration Depth
    Ji, Shude
    Hu, Wei
    Ma, Zhongwei
    Li, Qinghua
    Gong, Xue
    JOM, 2020, 72 (04) : 1589 - 1596
  • [35] Friction Stir Lap Welding of Mg/Ti Dissimilar Alloys Using a Slight Penetration Depth
    Shude Ji
    Wei Hu
    Zhongwei Ma
    Qinghua Li
    Xue Gong
    JOM, 2020, 72 : 1589 - 1596
  • [36] State of the art in friction stir welding and ultrasonic vibration-assisted friction stir welding of similar/dissimilar aluminum alloys
    Chinchanikar S.
    Gaikwad V.S.
    Chinchanikar, Satish (satish.chinchanikar@viit.ac.in), 2021, Shahid Rajaee Teacher Tarining University (SRTTU) (11): : 67 - 100
  • [37] Influence of ultrasonic vibration on the grain structure and dislocation density in friction stir welding of dissimilar Al/Mg alloys
    He, Faliang
    Wu, ChuanSong
    Shi, Lei
    MATERIALS TODAY COMMUNICATIONS, 2024, 40
  • [38] Numerical simulation of ultrasonic vibration-enhanced friction stir welding process of dissimilar Al/Mg alloys
    Yang, Chunliang
    Wu, ChuanSong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 120 (3-4): : 2277 - 2289
  • [39] Effects of Ultrasonic Vibration on Material Flow and Thermal Cycles in Friction Stir Welding of Dissimilar Al/Mg Alloys
    Xueqi Lv
    ChuanSong Wu
    Zhen Sun
    Metallurgical and Materials Transactions A, 2022, 53 : 1572 - 1584
  • [40] Numerical simulation of ultrasonic vibration-enhanced friction stir welding process of dissimilar Al/Mg alloys
    Chunliang Yang
    ChuanSong Wu
    The International Journal of Advanced Manufacturing Technology, 2022, 120 : 2277 - 2289
12345