Reliability Analysis of Hydraulic Transmission Oil Supply System of Power-Shift Steering Transmission with GO Methodology

被引:4
|
作者
伊枭剑 [1 ]
董海平 [1 ]
姜基平 [2 ]
赖岳华 [1 ]
张忠 [2 ]
机构
[1] School of Mechatronical Engineering,Beijing Institute of Technology
[2] China North Vehicle Research Institute
关键词
multi-fault modes; GO methodology; reliability analysis; hydraulic transmission oil supply system(HTOSS) of power-shift steering transmission;
D O I
10.19884/j.1672-5220.2014.06.015
中图分类号
TB114.3 [可靠性理论]; TH137 [液压传动];
学科分类号
080401 ; 080704 ;
摘要
GO methodology is a success-oriented method for system reliability analysis. There are components with multi-fault modes in repairable systems. It is a problem to use the existing GO method to make reliability analysis of such repairable systems. A new GO method for reliability analysis of such repairable systems with multifault modes was presented. Firstly, calculation equations of reliability parameters of operators which were used to describe components with multi-fault modes in reparable systems were derived based on Markov process theory. Then, this new GO method was applied in reliability analysis of a hydraulic transmission oil supply system( HTOSS) of a power-shift steering transmission at low and high speeds. Finally,Compared with fault tree analysis( FTA) and Monte Carlo simulation,the results show that this new GO method is correct and suitable for reliability analysis of repairable system with multi-fault modes.
引用
收藏
页码:785 / 788
页数:4
相关论文
共 50 条
  • [21] Application research on Condition Monitoring of Power-Shift Steering Transmission with Hypersphere Support Vector Machine
    Zhu, Yuan
    Zhang, Yingfeng
    Li, Bo
    Ma, Biao
    2010 8TH WORLD CONGRESS ON INTELLIGENT CONTROL AND AUTOMATION (WCICA), 2010, : 6394 - 6397
  • [22] Reliability Analysis of Hydraulic Steering System with DICLFL Considering Shutdown Correlation Based on GO Methodology
    Yi, XiaoJian
    Shi, Jian
    Mu, Hui-na
    Dong, Haiping
    Guo, Shaowei
    PROCEEDINGS OF THE 2015 FIRST INTERNATIONAL CONFERENCE ON RELIABILITY SYSTEMS ENGINEERING 2015 ICRSE, 2015,
  • [23] Automatic starting control of tractor with a novel power-shift transmission
    Li, Baogang
    Sun, Dongye
    Hu, Minghui
    Liu, Junlong
    MECHANISM AND MACHINE THEORY, 2019, 131 : 75 - 91
  • [24] Experimental evaluation of power losses in a power-shift agricultural tractor transmission
    Molari, G.
    Sedoni, E.
    BIOSYSTEMS ENGINEERING, 2008, 100 (02) : 177 - 183
  • [25] Fault diagnosis of power-shift steering transmission based on multiple outputs least squares support vector regression
    Zhang, Ying-Feng
    Ma, Biao
    Fang, Jing
    Zhang, Hai-Ling
    Fan, Yu-Heng
    Journal of Beijing Institute of Technology (English Edition), 2011, 20 (02): : 199 - 204
  • [26] Fault diagnosis of power-shift steering transmission based on multiple outputs least squares support vector regression
    张英锋
    马彪
    房京
    张海岭
    范昱珩
    JournalofBeijingInstituteofTechnology, 2011, 20 (02) : 199 - 204
  • [27] Wear State Evaluation Method Based on Improved Entropy-weighted TOPSIS for Power-shift Steering Transmission
    Chen, Tao
    Liu, Yong
    Jia, Ran
    Tang, Changliang
    Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences, 51 (12): : 10 - 18
  • [28] RELIABILITY ANALYSIS FOR POWER SUPPLY SYSTEM IN A TYPICAL REPROCESSING FACILITY BASED ON GO METHODOLOGY
    Wang Renze
    Feng Zongyang
    Li Pengbo
    PROCEEDINGS OF THE 21ST INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING - 2013, VOL 3, 2014,
  • [29] Experimental and simulated studies on hydraulic buffering valve for ZF-4WG308 power-shift transmission
    王飞
    王宇
    韩嘉骅
    姚进
    JournalofCentralSouthUniversity, 2017, 24 (08) : 1801 - 1807
  • [30] Optimization Method of Speed Ratio for Power-Shift Transmission of Agricultural Tractor
    Li, Baogang
    Pan, Jinbo
    Li, Yuhuan
    Ni, Kun
    Huang, Wanyou
    Jiang, Hanjun
    Liu, Fuhao
    MACHINES, 2023, 11 (04)