MICROSTRUCTURE AND ELECTROCHEMICAL CHARACTERISTICS OF Zr0.9Ti0.1(Ni1.1Mn0.7V0.2)x METAL HYDRIDE ELECTRODE

被引:0
|
作者
S.M.Han
M.S.Zhao
Y.Z.Zeng
机构
[1] China
[2] Yanshan University
[3] Qinhuangdo 066004
[4] Department of Environmental and Chemical Engineering
[5] Qinhuangdao 066004
[6] Changchun Institute of Applied Chemistry
[7] The Chinese Academy of Sciences
[8] Changchun 130022
[9] China Key Laboratory of Rare Earth Chemistry and Physics
关键词
metal hydride electrode; microstructure; electrochemical characteristics; non-stoichiometric ratio;
D O I
暂无
中图分类号
TG14 [金属材料];
学科分类号
080502 ;
摘要
The crystal structure, the phase composition and the electrochemical characteristics of Zr0.9Ti0.1(Ni1.1Mn0.7V0.2)x (x=0.90, 0.95, 1.00, 1.05) alloys were investigated by means of XRD, SEM, EDS and electrochemical measurements. It was shown that all alloys are multiphase with C15 Laves phase as a main phase along with C14 phase and some secondary phases. And the amounts of the C14 phase and secondary phases in the four alloys increases with decreasing x. The results indicated that the various stoichiometric ratios have great effects on the electrochemical characteristics such as the maximum discharge capacity, discharge rate capability and self-discharge properties etc. for Zr0.9Ti0.1(Ni1.1Mn0.7 V0.2)X (x=0.90, 0.95, 1.00, 1.05) alloys. The hyper-stoichiometric Zr0.9 Ti0.1(N1.1Mn0.7 V0.20)1.05 exhibits the maximum discharge capacity of 332mAh-g-1. The C14 phase and secondary phases seems to improve discharge rate capability of the alloys.
引用
收藏
页码:192 / 196
页数:5
相关论文
共 50 条
  • [31] Effect of copper additive on Zr0.9Ti0.1V0.2Mn0.6Cr0.05Co0.05Ni1.2 alloy anode for nickel-metal hydride batteries
    Hariprakash, B
    Martha, SK
    Shukla, AK
    JOURNAL OF APPLIED ELECTROCHEMISTRY, 2003, 33 (06) : 497 - 504
  • [32] Electrochemical characteristics of V-Ti-Zr-Ni protium absorbing alloys for metal hydride electrodes
    Tamura, Takuya
    Kuriiwa, Takahiro
    Fuda, Takeshi
    Kamegawa, Atsunori
    Okada, Masuo
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2000, 47 (01): : 68 - 72
  • [33] Effect of Ni addition on phase structure and electrochemical properties of Ti0.4Zr0.1V1.1Mn0.5Cr0.1 alloy
    Hang Zhou-Ming
    Zhao Min-Shou
    Qiao Yu-Qing
    Zhu Xin-Jian
    Cao Guang-Yi
    CHINESE JOURNAL OF INORGANIC CHEMISTRY, 2006, 22 (12) : 2141 - 2146
  • [34] Determination of internal cell pressures in sealed Ni-MH rechargeable batteries using Zr0.9Ti0.1(Mn0.7V0.5Ni1.2)0.92 hydrogen-storage alloys
    Kim, DM
    Lee, H
    Jang, KJ
    Lee, JY
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1998, 145 (10) : 3387 - 3391
  • [35] Preparation and electrochemical characteristics of amorphous Mg0.9Ti0.1Ni1-xCox (x=0.05, 0.1, 0.15, 0.2) alloys
    Feng, Y
    Jiao, LF
    Yuan, HT
    Wang, YJ
    Liu, Q
    Liu, Y
    ACTA CHIMICA SINICA, 2006, 64 (05) : 423 - 427
  • [36] Zr0.9Ti0.1(Ni,Co,Mn,V)2+α贮氢合金的制备过程对其性能的影响
    张国范
    文明芬
    翟玉春
    马荣骏
    陈廉
    佟敏
    过程工程学报, 2001, (03) : 301 - 303
  • [37] Degradation mechanism of Ti-Zr-V-Mn-Ni metal hydride electrodes
    Lee, HH
    Lee, KY
    Lee, JY
    JOURNAL OF ALLOYS AND COMPOUNDS, 1997, 260 (1-2) : 201 - 207
  • [38] Investigation of the hydrogen interaction with Ti0.9Zr0.1Mn1.3V0.7 by means of the calorimetric method
    Anikina, E. Yu.
    Verbetsky, V. N.
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2016, 41 (27) : 11520 - 11525
  • [39] Effect of milling atmosphere on the hydriding properties of a Mg-amorphous Zr0.9Ti0.1(Ni0.57 Mn0.28V0.1Co0.05)2.1 composite
    Leng, HY
    Chen, DM
    Lu, MQ
    Zhang, HF
    Cheng, HM
    Yang, K
    JOURNAL OF ALLOYS AND COMPOUNDS, 2003, 361 (1-2) : 276 - 281
  • [40] Effect of Ti Substitution on the Microstructure and Properties of Zr–Mn–V–Ni AB2 Type Hydride Electrode Alloys
    Xueyan Song
    Ze Zhang
    Xiaobin Zhang
    Yongquan Lei
    Qidong Wang
    Journal of Materials Research, 1999, 14