Recrystallization Modelling of Hot Deformed Si-Mn TRIP Steel

被引：0
|
作者：
ZHU Li-juan
机构：
来源：
Journal of Iron and Steel Research(International) | 2007年 / 02期
基金：
中国国家自然科学基金;
关键词：
dynamic recrystallization; static recrystallization; mathematical model; TRIP steel; silicon;
D O I：
10.13228/j.boyuan.issn1006-706x.2007.02.012
中图分类号：
TG386 [冷冲压工艺];
学科分类号：
080201 ; 080503 ;
摘要：
By means of hot compression single and double hit experiments, the kinetics of dynamic and static recrystallization in hot-rolled Si-Mn TRIP steel was studied, and the emphasis was put on the influence of high silicon content. The results show that the calculated parameters are consistent with the experimental ones, and addition of silicon retards both dynamic and static recrystallization as well as increases the flow stress of austenite, and the non-recrystallization zone can be enlarged by increasing the silicon contents.
引用
收藏
页码：61 / 65
页数：5
相关论文
共 50 条
  • [41] Phase transformation behavior of low-carbon Si-Mn TRIP steel during continuous cooling
    State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110004, China
    Dongbei Daxue Xuebao, 2008, 5 (685-688):
  • [42] The modeling of the grain growth in a continuous reheating process of a low carbon Si-Mn bearing TRIP steel
    Jiao, S
    Penning, J
    Leysen, F
    Houbaert, Y
    Aernoudt, E
    ISIJ INTERNATIONAL, 2000, 40 (10) : 1035 - 1040
  • [43] Effect of Thermomechanical Processing on Ferrite Grain Size and Retained Austenite Morphology of Si-Mn TRIP Steel
    Zhang, Zicheng
    Zhu, Fuxian
    Li, Yanmei
    Liu, Zhigang
    STEEL RESEARCH INTERNATIONAL, 2010, 81 (09) : 110 - 113
  • [44] THE INFLUENCE OF BAINITE ON RETAINED AUSTENITE CHARACTERISTICS IN SI-MN TRIP STEELS
    HANZAKI, AZ
    HODGSON, PD
    YUE, S
    ISIJ INTERNATIONAL, 1995, 35 (01) : 79 - 85
  • [45] Dynamic tensile characteristics of low carbon Si-Mn TRIP steels
    School of Materials Science and Engineering, Shanghai University, Shanghai 200072, China
    Beijing Keji Daxue Xuebao, 2006, 7 (635-640):
  • [46] Influence of hot deformation and austempering process on microstructure and mechanical properties of high Si-Mn steel
    Ibrahim, KM
    Ismail, A
    CANADIAN METALLURGICAL QUARTERLY, 2005, 44 (04) : 489 - 494
  • [47] EFFECT OF HOT ROLLING AND ACCELERATED COOLING ON THE MECHANICAL PROPERTIES OF Si-Mn STEEL PLATES.
    Katsumata, Masaaki
    Machida, Masahiro
    Kawata, Shoji
    Akiyama, Noriaki
    R and D: Research and Development Kobe Steel Engineering Reports, 1983, 33 (04): : 24 - 27
  • [48] EFFECT OF BAINITIC TRANSFORMATION ON MICROSTRUCTURE OF SI-MN STEEL
    TOMITA, Y
    JOURNAL OF MATERIALS SCIENCE, 1994, 29 (10) : 2605 - 2610
  • [49] On the tensile mechanical property of Si-Mn TRIP steels at high strain rate
    Wei, X.C.
    Li, L.
    Fu, R.Y.
    Shi, W.
    Acta Metallurgica Sinica (English Letters), 2002, 15 (03) : 285 - 294
  • [50] Influence of thermomechanical processing on microstructural evolution in Si-Mn and Al-Mn TRIP steels
    Manohar, PA
    Kunishige, K
    Chandra, T
    THERMEC'2003, PTS 1-5, 2003, 426-4 : 1127 - 1132
12345